[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1547788434.2065387.1637728584.1098F843@webmail.messagingengine.com>
Date: Fri, 18 Jan 2019 15:43:54 +1030
From: Andrew Jeffery <andrew@...id.au>
To: Stefan Schaeckeler <schaecsn@....net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Joel Stanley <joel@....id.au>, Borislav Petkov <bp@...en8.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-edac@...r.kernel.org
Cc: Stefan M Schaeckeler <sschaeck@...co.com>
Subject: Re: [PATCH v2 2/2] dt-bindings: edac: Aspeed AST2500
On Fri, 18 Jan 2019, at 03:08, Stefan Schaeckeler wrote:
> From: Stefan M Schaeckeler <sschaeck@...co.com>
>
> Add support for EDAC on the Aspeed AST2500 SoC.
>
> Signed-off-by: Stefan M Schaeckeler <sschaeck@...co.com>
Reviewed-by: Andrew Jeffery <andrew@...id.au>
> ---
> .../bindings/edac/aspeed-sdram-edac.txt | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
>
> diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-
> edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
> new file mode 100644
> index 000000000000..6a0f3d90d682
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
> @@ -0,0 +1,25 @@
> +Aspeed AST2500 SoC EDAC node
> +
> +The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without
> ECC (error
> +correction check).
> +
> +The memory controller supports SECDED (single bit error correction,
> double bit
> +error detection) and single bit error auto scrubbing by reserving 8
> bits for
> +every 64 bit word (effectively reducing available memory to 8/9).
> +
> +Note, the bootloader must configure ECC mode in the memory controller.
> +
> +
> +Required properties:
> +- compatible: should be "aspeed,ast2500-sdram-edac"
> +- reg: sdram controller register set should be <0x1e6e0000
> 0x174>
> +- interrupts: should be AVIC interrupt #0
> +
> +
> +Example:
> +
> + edac: sdram@...e0000 {
> + compatible = "aspeed,ast2500-sdram-edac";
> + reg = <0x1e6e0000 0x174>;
> + interrupts = <0>;
> + };
> --
> 2.19.1
>
Powered by blists - more mailing lists