[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <641ae2ce-def9-6032-b8dc-cc71311bc993@grandegger.com>
Date: Fri, 18 Jan 2019 07:56:24 +0100
From: Wolfgang Grandegger <wg@...ndegger.com>
To: Dan Murphy <dmurphy@...com>, mkl@...gutronix.de,
davem@...emloft.net
Cc: linux-can@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 1/4] can: m_can: Create a m_can platform framework
Hello Dan,
Am 17.01.19 um 21:08 schrieb Dan Murphy:
> Wolfgang
>
> On 1/17/19 2:05 PM, Dan Murphy wrote:
>> Create a m_can platform framework that peripherial
>> devices can register to and use common code and register sets.
>> The peripherial devices may provide read/write and configuration
>> support of the IP.
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>> ---
>> drivers/net/can/m_can/m_can.c | 6 +
>> drivers/net/can/m_can/m_can_platform.c | 209 +++++++++++++++++++++++++
>> drivers/net/can/m_can/m_can_platform.h | 163 +++++++++++++++++++
>> 3 files changed, 378 insertions(+)
>> create mode 100644 drivers/net/can/m_can/m_can_platform.c
>> create mode 100644 drivers/net/can/m_can/m_can_platform.h
>>
... snip ...
> This patch set is working for the TCAN and at least boots on io-mapped devices.
> We have a couple of customers who are looking at using this implementation and we would like to
> start moving this patch set along in the review.
>
> I did not put a change log in here as there have been no comments for the last 3 patch sets I sent.
>
> This v4 squashes a few bugs I found during testing across all the files.
OK, after a very busy week I will try to find time for the review...
finally.
Thanks,
Wolfgang.
Powered by blists - more mailing lists