[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190118080552.ppwgxboh3gt3nasv@pengutronix.de>
Date: Fri, 18 Jan 2019 09:05:52 +0100
From: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
To: Ryder Lee <ryder.lee@...iatek.com>
Cc: Thierry Reding <thierry.reding@...il.com>,
linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
Sean Wang <sean.wang@...nel.org>,
Weijie Gao <weijie.gao@...iatek.com>,
linux-kernel@...r.kernel.org, linux-mediatek@...ts.infradead.org,
Matthias Brugger <matthias.bgg@...il.com>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v1 1/5] pwm: mediatek: add a property "mediatek,num-pwms"
Hello,
just realized another issue while looking up a driver detail ...
On Fri, Jan 18, 2019 at 11:24:41AM +0800, Ryder Lee wrote:
> This adds a property "mediatek,num-pwms" to avoid having an endless
> list of compatibles with no differences for the same driver.
>
> Thus, the driver should have backwards compatibility to older DTs.
>
> Signed-off-by: Ryder Lee <ryder.lee@...iatek.com>
> ---
> Changes since v1: add some checks for backwards compatibility.
> ---
> drivers/pwm/pwm-mediatek.c | 27 ++++++++++++++++++---------
> 1 file changed, 18 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
> index eb6674c..81b7e5e 100644
> --- a/drivers/pwm/pwm-mediatek.c
> +++ b/drivers/pwm/pwm-mediatek.c
> @@ -55,7 +55,7 @@ enum {
> };
>
> struct mtk_pwm_platform_data {
> - unsigned int num_pwms;
> + unsigned int num_pwms; /* it should not be used in the future SoCs */
> bool pwm45_fixup;
> bool has_clks;
> };
> @@ -226,27 +226,36 @@ static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
>
> static int mtk_pwm_probe(struct platform_device *pdev)
> {
> - const struct mtk_pwm_platform_data *data;
> + struct device_node *np = pdev->dev.of_node;
> struct mtk_pwm_chip *pc;
> struct resource *res;
> - unsigned int i;
> + unsigned int i, num_pwms;
> int ret;
>
> pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
> if (!pc)
> return -ENOMEM;
>
> - data = of_device_get_match_data(&pdev->dev);
> - if (data == NULL)
> - return -EINVAL;
> - pc->soc = data;
> + pc->soc = of_device_get_match_data(&pdev->dev);
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> pc->regs = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(pc->regs))
> return PTR_ERR(pc->regs);
>
> - for (i = 0; i < data->num_pwms + 2 && pc->soc->has_clks; i++) {
> + /* Check if we have set 'num-pwms' in DTs. */
> + ret = of_property_read_u32(np, "mediatek,num-pwms", &num_pwms);
> + if (ret < 0) {
> + /* If no, fallback to use SoC data for backwards compatibility. */
> + if (pc->soc->num_pwms) {
> + num_pwms = pc->soc->num_pwms;
> + } else {
> + dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + for (i = 0; i < num_pwms + 2 && pc->soc->has_clks; i++) {
> pc->clks[i] = devm_clk_get(&pdev->dev, mtk_pwm_clk_name[i]);
If a dt contains
mediatek,num-pwms = <17>;
you're accessing pc->clks[18] which is an out-of-bounds access, so
better check the limit or allocate the clks array dynamically.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Powered by blists - more mailing lists