[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1547801609.2626.5.camel@pengutronix.de>
Date: Fri, 18 Jan 2019 09:53:29 +0100
From: Lucas Stach <l.stach@...gutronix.de>
To: Aisheng Dong <aisheng.dong@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Cc: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
dl-linux-imx <linux-imx@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"tglx@...utronix.de" <tglx@...utronix.de>,
Marc Zyngier <marc.zyngier@....com>
Subject: Re: [PATCH 4/4] irq: imx: irqsteer: add multi output interrupts
support
Am Freitag, den 18.01.2019, 07:53 +0000 schrieb Aisheng Dong:
> One irqsteer channel can support up to 8 output interrupts.
This has been discussed when upstreaming the driver. The controller may
support multiple output IRQs, but only one them is actually used
depending on the CHANCTRL config. There is no use in hooking up all the
output IRQs in DT, if only one of them is actually used. Some of the
outputs may not even be visible to the Linux system, but may belong to
a Cortex M4 subsystem. All of those configurations can be described in
DT by changing the upstream interrupt and "fsl,channel" in a coherent
way.
Please correct me if my understanding is totally wrong.
Regards,
Lucas
> Cc: Marc Zyngier <marc.zyngier@....com>
> > Cc: Lucas Stach <l.stach@...gutronix.de>
> > Cc: Shawn Guo <shawnguo@...nel.org>
> > Signed-off-by: Dong Aisheng <aisheng.dong@....com>
> ---
> drivers/irqchip/irq-imx-irqsteer.c | 39 +++++++++++++++++++++++++++-----------
> 1 file changed, 28 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
> index 1bebf0a..54802fa 100644
> --- a/drivers/irqchip/irq-imx-irqsteer.c
> +++ b/drivers/irqchip/irq-imx-irqsteer.c
> @@ -10,6 +10,7 @@
> #include <linux/irqchip/chained_irq.h>
> #include <linux/irqdomain.h>
> #include <linux/kernel.h>
> +#include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/spinlock.h>
>
> @@ -21,10 +22,13 @@
> > #define CHAN_MINTDIS(t) (CTRL_STRIDE_OFF(t, 3) + 0x4)
> > #define CHAN_MASTRSTAT(t) (CTRL_STRIDE_OFF(t, 3) + 0x8)
>
> > +#define CHAN_MAX_OUTPUT_INT 0x8
> +
> struct irqsteer_data {
> > > void __iomem *regs;
> > > struct clk *ipg_clk;
> > > - int irq;
> > > + int irq[CHAN_MAX_OUTPUT_INT];
> > > + int irq_count;
> > > raw_spinlock_t lock;
> > > int reg_num;
> > > int channel;
> @@ -117,7 +121,7 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> > struct device_node *np = pdev->dev.of_node;
> > struct irqsteer_data *data;
> > struct resource *res;
> > - int ret;
> > + int i, ret;
>
> > data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> > if (!data)
> @@ -130,12 +134,6 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> > return PTR_ERR(data->regs);
> > }
>
> > - data->irq = platform_get_irq(pdev, 0);
> > - if (data->irq <= 0) {
> > - dev_err(&pdev->dev, "failed to get irq\n");
> > - return -ENODEV;
> > - }
> -
> > data->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
> > if (IS_ERR(data->ipg_clk)) {
> > ret = PTR_ERR(data->ipg_clk);
> @@ -177,8 +175,23 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> > return -ENOMEM;
> > }
>
> > - irq_set_chained_handler_and_data(data->irq, imx_irqsteer_irq_handler,
> > - data);
> > + data->irq_count = of_irq_count(np);
> > + if (!data->irq_count || data->irq_count > CHAN_MAX_OUTPUT_INT) {
> > + clk_disable_unprepare(data->ipg_clk);
> > + return -EINVAL;
> > + }
> +
> > + for (i = 0; i < data->irq_count; i++) {
> > + data->irq[i] = irq_of_parse_and_map(np, i);
> > + if (!data->irq[i]) {
> > + clk_disable_unprepare(data->ipg_clk);
> > + return -EINVAL;
> > + }
> +
> > + irq_set_chained_handler_and_data(data->irq[i],
> > + imx_irqsteer_irq_handler,
> > + data);
> > + }
>
> > platform_set_drvdata(pdev, data);
>
> @@ -188,8 +201,12 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
> static int imx_irqsteer_remove(struct platform_device *pdev)
> {
> > struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev);
> > + int i;
> +
> > + for (i = 0; i < irqsteer_data->irq_count; i++)
> > + irq_set_chained_handler_and_data(irqsteer_data->irq[i],
> > + NULL, NULL);
>
> > - irq_set_chained_handler_and_data(irqsteer_data->irq, NULL, NULL);
> > irq_domain_remove(irqsteer_data->domain);
>
> > clk_disable_unprepare(irqsteer_data->ipg_clk);
Powered by blists - more mailing lists