[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190118150851.GC25249@google.com>
Date: Fri, 18 Jan 2019 09:08:51 -0600
From: Bjorn Helgaas <helgaas@...nel.org>
To: Srinath Mannam <srinath.mannam@...adcom.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com, linux-pci@...r.kernel.org,
iommu@...ts.linux-foundation.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] PCI: iproc: CRS state check in config request
On Fri, Jan 18, 2019 at 09:53:22AM +0530, Srinath Mannam wrote:
> In the current implementation, config read of 0xffff0001 data
> is assumed as CRS completion. but sometimes 0xffff0001 can be
> a valid data.
> IPROC PCIe RC has a register to show config request status flags
> like SC, UR, CRS and CA.
> So that extra check is added in the code to confirm the CRS
> state using this register before reissue config request.
s/. but/. But/ (Sentences start with a capital letter.)
Please wrap this text correctly. If it's a single paragraph, wrap it so
the lines are filled. It *looks* like it's intended to be separate
paragraphs; they should be separated by blank lines.
> Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
> Reviewed-by: Ray Jui <ray.jui@...adcom.com>
> ---
> drivers/pci/controller/pcie-iproc.c | 23 +++++++++++++++++++++--
> 1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
> index 13ce80f..ee89d56 100644
> --- a/drivers/pci/controller/pcie-iproc.c
> +++ b/drivers/pci/controller/pcie-iproc.c
> @@ -63,6 +63,10 @@
> #define APB_ERR_EN_SHIFT 0
> #define APB_ERR_EN BIT(APB_ERR_EN_SHIFT)
>
> +#define CFG_RD_SUCCESS 0
> +#define CFG_RD_UR 1
> +#define CFG_RD_CRS 2
> +#define CFG_RD_CA 3
> #define CFG_RETRY_STATUS 0xffff0001
> #define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */
>
> @@ -300,6 +304,9 @@ enum iproc_pcie_reg {
> IPROC_PCIE_IARR4,
> IPROC_PCIE_IMAP4,
>
> + /* config read status */
> + IPROC_PCIE_CFG_RD_STATUS,
> +
> /* link status */
> IPROC_PCIE_LINK_STATUS,
>
> @@ -370,6 +377,7 @@ static const u16 iproc_pcie_reg_paxb_v2[] = {
> [IPROC_PCIE_IMAP3] = 0xe08,
> [IPROC_PCIE_IARR4] = 0xe68,
> [IPROC_PCIE_IMAP4] = 0xe70,
> + [IPROC_PCIE_CFG_RD_STATUS] = 0xee0,
> [IPROC_PCIE_LINK_STATUS] = 0xf0c,
> [IPROC_PCIE_APB_ERR_EN] = 0xf40,
> [IPROC_PCIE_ORDERING_CFG] = 0x2000,
> @@ -501,10 +509,12 @@ static void __iomem *iproc_pcie_map_ep_cfg_reg(struct iproc_pcie *pcie,
> return (pcie->base + offset);
> }
>
> -static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p)
> +static unsigned int iproc_pcie_cfg_retry(struct iproc_pcie *pcie,
> + void __iomem *cfg_data_p)
> {
> int timeout = CFG_RETRY_STATUS_TIMEOUT_US;
> unsigned int data;
> + u32 status;
>
> /*
> * As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only
> @@ -525,6 +535,15 @@ static unsigned int iproc_pcie_cfg_retry(void __iomem *cfg_data_p)
> */
> data = readl(cfg_data_p);
> while (data == CFG_RETRY_STATUS && timeout--) {
> + /*
> + * CRS state is set in CFG_RD status register
> + * This will handle the case where CFG_RETRY_STATUS is
> + * valid config data.
> + */
> + status = iproc_pcie_read_reg(pcie, IPROC_PCIE_CFG_RD_STATUS);
> + if (status != CFG_RD_CRS)
> + return data;
> +
> udelay(1);
> data = readl(cfg_data_p);
> }
> @@ -603,7 +622,7 @@ static int iproc_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> if (!cfg_data_p)
> return PCIBIOS_DEVICE_NOT_FOUND;
>
> - data = iproc_pcie_cfg_retry(cfg_data_p);
> + data = iproc_pcie_cfg_retry(pcie, cfg_data_p);
>
> *val = data;
> if (size <= 2)
> --
> 2.7.4
>
Powered by blists - more mailing lists