linux-kernel - [PATCH v3 6/6] dt-bindings: fpga: Add bindings for ZynqMP fpga driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190121173835.21173-7-nava.manne@xilinx.com>
Date:   Mon, 21 Jan 2019 23:08:35 +0530
From:   Nava kishore Manne <nava.manne@...inx.com>
To:     <mark.rutland@....com>, <michals@...inx.com>, <RAJANV@...inx.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <JOLLYS@...inx.com>, <chinnikishore369@...il.com>,
        <robh+dt@...nel.org>
CC:     Nava kishore Manne <nava.manne@...inx.com>
Subject: [PATCH v3 6/6] dt-bindings: fpga: Add bindings for ZynqMP fpga driver

Add documentation to describe Xilinx ZynqMP fpga driver
bindings.

Signed-off-by: Nava kishore Manne <nava.manne@...inx.com>
---
Changes for v3:
		-Removed PCAP as a child node to the FW and Created
		an independent node since PCAP driver is a consumer
		not a provider. 

 .../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt         | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 000000000000..1f6f58872311
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,13 @@
+Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
+using ZynqMP SoC firmware interface
+For Bitstream configuration on ZynqMp Soc uses processor configuration
+port(PCAP) to configure the programmable logic(PL) through PS by using
+FW interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+
+Example:
+	zynqmp_pcap: pcap {
+		compatible = "xlnx,zynqmp-pcap-fpga";
+	};
-- 
2.18.0