lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Sun, 20 Jan 2019 11:32:29 +0000
From:   Marc Zyngier <marc.zyngier@....com>
To:     Brian Masney <masneyb@...tation.org>
Cc:     linus.walleij@...aro.org, sboyd@...nel.org,
        bjorn.andersson@...aro.org, andy.gross@...aro.org,
        shawnguo@...nel.org, dianders@...omium.org,
        linux-gpio@...r.kernel.org, nicolas.dechesne@...aro.org,
        niklas.cassel@...aro.org, david.brown@...aro.org,
        robh+dt@...nel.org, mark.rutland@....com, thierry.reding@...il.com,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v6 07/15] qcom: spmi-gpio: add support for hierarchical IRQ chip

On Sat, 19 Jan 2019 20:42:44 +0000,
Brian Masney <masneyb@...tation.org> wrote:
> 
> spmi-gpio did not have any irqchip support so consumers of this in
> device tree would need to call gpio[d]_to_irq() in order to get the
> proper IRQ on the underlying PMIC. IRQ chips in device tree should
> be usable from the start without the consumer having to make an
> additional call to get the proper IRQ on the parent. This patch adds
> hierarchical IRQ chip support to the spmi-gpio code to correct this
> issue.
> 
> Driver was tested using the volume buttons (via gpio-keys) on the LG
> Nexus 5 (hammerhead) phone with the following two configurations.
> 
> volume-up {
>         interrupts-extended = <&pm8941_gpios 2 IRQ_TYPE_EDGE_BOTH>;
>         ...
> };
> 
> volume-up {
>         gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
>         ...
> };
> 
> Both configurations now show that spmi-gpio is the IRQ domain and that
> the IRQ is setup in a hierarchy.
> 
> $ grep volume_up /proc/interrupts
>  72:          6          0  spmi-gpio   1 Edge      volume_up
> 
> $ cat /sys/kernel/debug/irq/irqs/72
> handler:  handle_edge_irq
> device:   (null)
> status:   0x00000403
>             _IRQ_NOPROBE
> istate:   0x00000000
> ddepth:   0
> wdepth:   0
> dstate:   0x02400203
>             IRQ_TYPE_EDGE_RISING
>             IRQ_TYPE_EDGE_FALLING
>             IRQD_ACTIVATED
>             IRQD_IRQ_STARTED
> node:     0
> affinity: 0-3
> effectiv:
> domain:  :soc:spmi@...cf000:pm8941@0:gpios@...0
>  hwirq:   0x1
>  chip:    spmi-gpio
>   flags:   0x4
>              IRQCHIP_MASK_ON_SUSPEND
>  parent:
>     domain:  :soc:spmi@...cf000
>      hwirq:   0xc100057
>      chip:    pmic_arb
>       flags:   0x4
>                  IRQCHIP_MASK_ON_SUSPEND
> 
> Signed-off-by: Brian Masney <masneyb@...tation.org>
> Reviewed-by: Stephen Boyd <sboyd@...nel.org>
> ---
> Changes since v5:
> - Change IRQ_TYPE_NONE to IRQ_TYPE_EDGE_RISING
> 
> Changes since v4:
> - None
> 
> Changes since v3:
> - None
> 
> Changes since v2:
> - Use PMIC_GPIO_PHYSICAL_OFFSET instead of the 1 constant
> - Use gpiochip_irq_domain_{activate,deactivate}
> - Changed 'fwspec->param[0] + 0xc0 - 1' to 'hwirq + c0' in call to
>   irq_domain_alloc_irqs_parent
> 
> Changes since v1:
> - Use two cells for interrupts instead of four.
> - Pin numbers in interrupts-extended are now one based instead of zero
>   based so that they match the GPIO pin number.
> - Drop unnecessary parenthesis in pmic_gpio_domain_translate
> - Add missing of_node_put()
> - Remove irq field from pmic_gpio_pad struct that is no longer
>   necessary.
> 
>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 115 +++++++++++++++++++++--
>  1 file changed, 105 insertions(+), 10 deletions(-)

Reviewed-by: Marc Zyngier <marc.zyngier@....com>

Thanks,

	M.

-- 
Jazz is not dead, it just smell funny.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ