linux-kernel - Re: [PATCH V2] ARM: dts: imx: Add support for Logic PD i.MX6QD EVM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAOMZO5DvotRNhzeDEhz_jPVBmme8ozJ80KhjLH7mBGBd-K3BFg@mail.gmail.com>
Date:   Wed, 23 Jan 2019 10:05:07 -0200
From:   Fabio Estevam <festevam@...il.com>
To:     Adam Ford <aford173@...il.com>
Cc:     "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        Mark Rutland <mark.rutland@....com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        Rob Herring <robh+dt@...nel.org>,
        NXP Linux Team <linux-imx@....com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        Shawn Guo <shawnguo@...nel.org>
Subject: Re: [PATCH V2] ARM: dts: imx: Add support for Logic PD i.MX6QD EVM

Hi Adam,

On Tue, Jan 22, 2019 at 2:50 PM Adam Ford <aford173@...il.com> wrote:

> +       tmp102@4a {

temperature-sensor@4a

> +               compatible = "ti,tmp102";
> +               reg = <0x4a>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_tempsense>;
> +               interrupt-parent = <&gpio6>;
> +               interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> +               #thermal-sensor-cells = <1>;
> +       };
> +
> +       tmp102@49 {

temperature-sensor@49

> +               compatible = "ti,tmp102";
> +               reg = <0x49>;
> +               interrupt-parent = <&gpio6>;
> +               interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> +               #thermal-sensor-cells = <1>;
> +       };
> +
> +       at24@51 {

eeprom@51

> +               compatible = "atmel,24c64";
> +               pagesize = <32>;
> +               read-only;      /* Manufacturing EEPROM programmed at factory */
> +               reg = <0x51>;
> +       };
> +
> +       at24@52 {

eeprom@52

With these changes you can add:

Reviewed-by: Fabio Estevam <festevam@...il.com>