[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CANAwSgQXFWNP4NdmheyE2O25FzBk7VOwbY1h7rx4GrH9J4XiZg@mail.gmail.com>
Date: Wed, 23 Jan 2019 23:55:04 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Kevin Hilman <khilman@...libre.com>
Cc: devicetree <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-amlogic@...ts.infradead.org,
Linux Kernel <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Jerome Brunet <jbrunet@...libre.com>,
Neil Armstrong <narmstrong@...libre.com>,
Emiliano Ingrassia <ingrassia@...genesys.com>
Subject: Re: [PATCH 1/2] ARM: dts: meson8b: odroidc1: Enable usb phy node
Hi Kevin,
On Wed, 23 Jan 2019 at 22:20, Kevin Hilman <khilman@...libre.com> wrote:
>
> Anand Moon <linux.amoon@...il.com> writes:
>
> > Add missing vbus-supply link to phy controller for usb_phy0
> > and usb_phy1 nodes, this changes fixed the power issue
> > on usb ports usb, changes help fix usb reset warning.
> >
> > [ 821.991470] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> > [ 825.243385] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> > [ 828.151310] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> > [ 830.991241] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> >
> > Fixes: 2eb79a4d15ff (ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board)
> > Cc: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
> > Cc: Jerome Brunet <jbrunet@...libre.com>
> > Cc: Neil Armstrong <narmstrong@...libre.com>
> > Signed-off-by: Anand Moon <linux.amoon@...il.com>
> > ---
> > Rebased on Kevin's amlogic/v5.0/fixes branch
>
> As requested, dropping this series from the fixes branch pending further
> debug and testing.
>
> Kevin
[snip]
Thanks your very much.
Best Regards
-Anand
Powered by blists - more mailing lists