[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd033] [ 0.000000] Linux version 4.19.16 (builder@a9d1a77f2ff6) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP PREEMPT Wed Jan 23 17:59:41 UTC 2019 [ 0.000000] Machine model: HiKey Development Board [ 0.000000] Memory limited to 1820MB [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.60 by EDK II [ 0.000000] efi: MEMATTR=0x3cd48a98 [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006bc00000, size 128 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x0000000073ef2fff] [ 0.000000] NUMA: NODE_DATA [mem 0x73ea95c0-0x73eaad7f] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x0000000073ef2fff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000005dfffff] [ 0.000000] node 0: [mem 0x0000000005f00000-0x0000000005f00fff] [ 0.000000] node 0: [mem 0x0000000005f02000-0x0000000006dfefff] [ 0.000000] node 0: [mem 0x0000000006e00000-0x000000000740efff] [ 0.000000] node 0: [mem 0x0000000007410000-0x0000000021efffff] [ 0.000000] node 0: [mem 0x0000000022000000-0x0000000034ffffff] [ 0.000000] node 0: [mem 0x00000000350f0000-0x000000003864ffff] [ 0.000000] node 0: [mem 0x0000000038650000-0x000000003888ffff] [ 0.000000] node 0: [mem 0x0000000038890000-0x0000000038897fff] [ 0.000000] node 0: [mem 0x0000000038898000-0x000000003889bfff] [ 0.000000] node 0: [mem 0x000000003889c000-0x000000003d85ffff] [ 0.000000] node 0: [mem 0x000000003d860000-0x000000003d89ffff] [ 0.000000] node 0: [mem 0x000000003d8a0000-0x000000003d8affff] [ 0.000000] node 0: [mem 0x000000003d8b0000-0x000000003d8fffff] [ 0.000000] node 0: [mem 0x000000003d900000-0x000000003dffffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000073ef2fff] [ 0.000000] Reserved but unavailable: 256 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000073ef2fff] [ 0.000000] On node 0 totalpages: 465920 [ 0.000000] DMA32 zone: 7420 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 465920 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x414 with crng_init=0 [ 0.000000] percpu: Embedded 22 pages/cpu @(____ptrval____) s53016 r8192 d28904 u90112 [ 0.000000] pcpu-alloc: s53016 r8192 d28904 u90112 alloc=22*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 843419 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 458500 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=PARTUUID=2aa1d65d-cfdc-4ffa-b59c-c70cb3e25633 rootwait mem=1820M [ 0.000000] Memory: 1676320K/1863680K available (9980K kernel code, 1294K rwdata, 4312K rodata, 1152K init, 371K bss, 56288K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 1.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x11b661f8e, max_idle_ns: 1763180809113 ns [ 0.000004] sched_clock: 56 bits at 1200kHz, resolution 833ns, wraps every 4398046510838ns [ 0.000126] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.000135] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 111848106981ns [ 0.000801] Console: colour dummy device 80x25 [ 0.001349] console [tty0] enabled [ 0.001433] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=4800) [ 0.001457] pid_max: default: 32768 minimum: 301 [ 0.001534] Security Framework initialized [ 0.002211] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002554] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.002596] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.002624] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024001] ASID allocator initialised with 32768 entries [ 0.031997] rcu: Hierarchical SRCU implementation. [ 0.042067] Remapping and enabling EFI services. [ 0.048040] smp: Bringing up secondary CPUs ... [ 0.080291] Detected VIPT I-cache on CPU1 [ 0.080345] CPU1: Booted secondary processor 0x0000000001 [0x410fd033] [ 0.112305] Detected VIPT I-cache on CPU2 [ 0.112331] CPU2: Booted secondary processor 0x0000000002 [0x410fd033] [ 0.144364] Detected VIPT I-cache on CPU3 [ 0.144388] CPU3: Booted secondary processor 0x0000000003 [0x410fd033] [ 0.176479] Detected VIPT I-cache on CPU4 [ 0.176519] CPU4: Booted secondary processor 0x0000000100 [0x410fd033] [ 0.208491] Detected VIPT I-cache on CPU5 [ 0.208516] CPU5: Booted secondary processor 0x0000000101 [0x410fd033] [ 0.240557] Detected VIPT I-cache on CPU6 [ 0.240580] CPU6: Booted secondary processor 0x0000000102 [0x410fd033] [ 0.272621] Detected VIPT I-cache on CPU7 [ 0.272645] CPU7: Booted secondary processor 0x0000000103 [0x410fd033] [ 0.272733] smp: Brought up 1 node, 8 CPUs [ 0.272864] SMP: Total of 8 processors activated. [ 0.272877] CPU features: detected: 32-bit EL0 Support [ 0.277459] CPU: All CPU(s) started at EL2 [ 0.277506] alternatives: patching kernel code [ 0.278231] devtmpfs: initialized [ 0.284194] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284259] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.288449] pinctrl core: initialized pinctrl subsystem [ 0.290020] DMI not present or invalid. [ 0.290393] NET: Registered protocol family 16 [ 0.290790] audit: initializing netlink subsys (disabled) [ 0.290922] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292454] cpuidle: using governor menu [ 0.292657] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 0.292678] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298210] DMA: preallocated 256 KiB pool for atomic allocations [ 0.299481] Serial: AMBA PL011 UART driver [ 0.301783] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 7, base_baud = 0) is a PL011 rev2 [ 0.307567] hi6220-mbox f7510000.mailbox: Mailbox enabled [ 0.320751] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.321189] cryptd: max_cpu_qlen set to 1000 [ 0.321948] ACPI: Interpreter disabled. [ 0.322765] VDD_3V3: supplied by SYS_5V [ 0.323184] vgaarb: loaded [ 0.323435] SCSI subsystem initialized [ 0.323651] libata version 3.00 loaded. [ 0.323953] usbcore: registered new interface driver usbfs [ 0.324002] usbcore: registered new interface driver hub [ 0.324107] usbcore: registered new device driver usb [ 0.324960] pps_core: LinuxPPS API ver. 1 registered [ 0.324974] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.325006] PTP clock support registered [ 0.325128] EDAC MC: Ver: 3.0.0 [ 0.325428] Registered efivars operations [ 0.326780] clocksource: Switched to clocksource arch_sys_counter [ 0.326965] VFS: Disk quotas dquot_6.6.0 [ 0.327023] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.327163] pnp: PnP ACPI: disabled [ 0.332699] NET: Registered protocol family 2 [ 0.333225] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [ 0.333310] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.333467] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.333678] TCP: Hash tables configured (established 16384 bind 16384) [ 0.333789] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.333846] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.333998] NET: Registered protocol family 1 [ 0.334352] RPC: Registered named UNIX socket transport module. [ 0.334365] RPC: Registered udp transport module. [ 0.334376] RPC: Registered tcp transport module. [ 0.334388] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.334405] PCI: CLS 0 bytes, default 64 [ 0.334542] Unpacking initramfs... [ 0.425489] Freeing initrd memory: 2372K [ 0.429435] Initialise system trusted keyrings [ 0.429581] workingset: timestamp_bits=44 max_order=19 bucket_order=0 [ 0.435281] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.435949] NFS: Registering the id_resolver key type [ 0.435981] Key type id_resolver registered [ 0.435992] Key type id_legacy registered [ 0.436009] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.436165] 9p: Installing v9fs 9p2000 file system support [ 0.436251] pstore: using deflate compression [ 0.438738] Key type asymmetric registered [ 0.438758] Asymmetric key parser 'x509' registered [ 0.438839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.438858] io scheduler noop registered [ 0.439004] io scheduler cfq registered (default) [ 0.439019] io scheduler mq-deadline registered [ 0.439030] io scheduler kyber registered [ 0.442121] pinctrl-single f7010000.pinmux: 159 pins, size 636 [ 0.442672] pinctrl-single f7010800.pinmux: 163 pins, size 652 [ 0.443068] pinctrl-single f8001800.pinmux: 30 pins, size 120 [ 0.444788] pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered [ 0.445019] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered [ 0.445191] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered [ 0.445293] gpio gpiochip3: names 9 do not match number of GPIOs 8 [ 0.445396] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered [ 0.445568] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered [ 0.445753] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered [ 0.445931] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered [ 0.446116] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered [ 0.446208] gpio gpiochip8: names 9 do not match number of GPIOs 8 [ 0.446306] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered [ 0.446491] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered [ 0.446697] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered [ 0.446925] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered [ 0.447119] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered [ 0.447315] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered [ 0.447494] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered [ 0.447686] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered [ 0.447871] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered [ 0.448064] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered [ 0.448243] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered [ 0.448432] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered [ 0.457044] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.458604] SuperH (H)SCI(F) driver initialized [ 0.458944] msm_serial: driver initialized [ 0.466574] loop: module loaded [ 0.472927] libphy: Fixed MDIO Bus: probed [ 0.473747] tun: Universal TUN/TAP device driver, 1.6 [ 0.474730] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.474753] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.474827] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.474842] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.474886] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.474902] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.475163] sky2: driver version 1.30 [ 0.475622] VFIO - User Level meta-driver version: 0.3 [ 0.476795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.476818] ehci-pci: EHCI PCI platform driver [ 0.476858] ehci-platform: EHCI generic platform driver [ 0.476957] ehci-orion: EHCI orion driver [ 0.477032] ehci-exynos: EHCI EXYNOS driver [ 0.477105] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.477137] ohci-pci: OHCI PCI platform driver [ 0.477178] ohci-platform: OHCI generic platform driver [ 0.477261] ohci-exynos: OHCI EXYNOS driver [ 0.477611] usbcore: registered new interface driver usb-storage [ 0.479541] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 0.479903] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc1 [ 0.480211] rtc-pl031 f8004000.rtc: rtc core: registered pl031 as rtc2 [ 0.480731] i2c /dev entries driver [ 0.484962] sdhci: Secure Digital Host Controller Interface driver [ 0.484992] sdhci: Copyright(c) Pierre Ossman [ 0.485166] Synopsys Designware Multimedia Card Interface Driver [ 0.485765] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default [ 0.485889] dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode. [ 0.486903] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller. [ 0.486924] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a [ 0.486990] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 41,32 bit host data width,256 deep fifo [ 0.487113] dwmmc_k3 f723d000.dwmmc0: Linked as a consumer to regulator.10 [ 0.487193] mmc_host mmc0: card is non-removable. [ 0.500101] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 0.513254] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default [ 0.513517] dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode. [ 0.514226] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller. [ 0.514247] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a [ 0.514298] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 42,32 bit host data width,128 deep fifo [ 0.514403] dwmmc_k3 f723e000.dwmmc1: Linked as a consumer to regulator.5 [ 0.514453] dwmmc_k3 f723e000.dwmmc1: Linked as a consumer to regulator.4 [ 0.514520] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO [ 0.527407] mmc_host mmc1: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 0.541535] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default [ 0.541674] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode. [ 0.542630] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller. [ 0.542653] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a [ 0.542703] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo [ 0.542824] dwmmc_k3 f723f000.dwmmc2: Linked as a consumer to regulator.2 [ 0.542910] dwmmc_k3 f723f000.dwmmc2: allocated mmc-pwrseq [ 0.542926] mmc_host mmc2: card is non-removable. [ 0.543046] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_pre_power_on clk_prepare_enable() [ 0.574948] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 0.588535] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.589747] mmc_host mmc0: Bus speed (slot 0) = 198400000Hz (slot req 200000000Hz, actual 198400000HZ div = 0) [ 0.590218] mmc0: new HS200 MMC card at address 0001 [ 0.591431] ledtrig-cpu: registered to indicate activity on CPUs [ 0.591933] mmcblk0: mmc0:0001 H8G1e 7.28 GiB [ 0.592628] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB [ 0.592959] usbcore: registered new interface driver usbhid [ 0.592977] usbhid: USB HID core driver [ 0.593340] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB [ 0.593494] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB, chardev (241:0) [ 0.594671] mmc_host mmc1: Bus speed (slot 0) = 99200000Hz (slot req 100000000Hz, actual 99200000HZ div = 0) [ 0.594724] mmc1: new ultra high speed SDR50 SDHC card at address 1234 [ 0.594917] dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range [ 0.595199] NET: Registered protocol family 10 [ 0.595964] mmcblk1: mmc1:1234 SA16G 14.6 GiB [ 0.596108] Segment Routing with IPv6 [ 0.596206] NET: Registered protocol family 17 [ 0.596273] 9pnet: Installing 9P2000 support [ 0.596343] Key type dns_resolver registered [ 0.596959] registered taskstats version 1 [ 0.596978] Loading compiled-in X.509 certificates [ 0.597659] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 0.602127] mmcblk1: p1 p2 [ 0.602869] f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 8, base_baud = 0) is a PL011 rev2 [ 0.603351] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 9, base_baud = 0) is a PL011 rev2 [ 0.603821] f7113000.uart: ttyAMA3 at MMIO 0xf7113000 (irq = 10, base_baud = 0) is a PL011 rev2 [ 0.777768] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 0.777784] mmc (null): mmc_attach_sdio Enabled runtime PM() [ 1.184324] random: fast init done [ 1.189466] console [ttyAMA3] enabled [ 2.218195] 5V_HUB: supplied by SYS_5V [ 2.222613] ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022 [ 2.229737] ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to (____ptrval____) [ 2.238604] ssp-pl022 f7106000.spi: Failed to work in dma mode, work without dma! [ 2.246119] mmc2: new SDIO card at address 0001 [ 2.250884] mmc mmc2:0001: mmc_attach_sdio pm_runtime_put() [ 2.256626] mmc mmc2:0001: mmc_sdio_runtime_suspend [ 2.261567] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_power_off clk_disable_unprepare() [ 2.271185] mmc mmc2:0001: mmc_sdio_runtime_suspend - DONE [ 2.277843] phy phy-soc:usbphy.0: Linked as a consumer to regulator.13 [ 2.285272] dwc2 f72c0000.usb: f72c0000.usb supply vusb_d not found, using dummy regulator [ 2.293638] dwc2 f72c0000.usb: Linked as a consumer to regulator.0 [ 2.299839] dwc2 f72c0000.usb: f72c0000.usb supply vusb_a not found, using dummy regulator [ 2.515191] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM [ 2.524180] dwc2 f72c0000.usb: DWC OTG Controller [ 2.528954] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1 [ 2.536046] dwc2 f72c0000.usb: irq 39, io mem 0xf72c0000 [ 2.542413] hub 1-0:1.0: USB hub found [ 2.546222] hub 1-0:1.0: 1 port detected [ 2.552410] rtc-efi rtc-efi: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 2.560169] LDO2_2V8: disabling [ 2.563340] LDO13_1V8: disabling [ 2.566573] LDO14_2V8: disabling [ 2.569814] LDO17_2V5: disabling [ 2.573421] uart-pl011 f7113000.uart: no DMA platform data [ 2.579353] Freeing unused kernel memory: 1152K [ 2.583976] Run /init as init process [ 2.613909] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.617366] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.621636] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.943139] dwc2 f72c0000.usb: Set speed to high-speed [ 2.948330] usb 1-1: new high-speed USB device number 2 using dwc2 [ 3.139132] dwc2 f72c0000.usb: Set speed to high-speed [ 3.166187] hub 1-1:1.0: USB hub found [ 3.170415] hub 1-1:1.0: 3 ports detected [ 3.497735] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.880254] systemd[1]: System time before build time, advancing clock. [ 3.919810] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.938260] systemd[1]: Detected architecture arm64. [ 3.960044] systemd[1]: Set hostname to . [ 4.202660] systemd[1]: Reached target Remote File Systems. [ 4.223196] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.247522] systemd[1]: Listening on Journal Audit Socket. [ 4.267212] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.287267] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.311077] systemd[1]: Reached target Swap. [ 4.327134] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.498311] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 4.647830] jailhouse: loading out-of-tree module taints kernel. [ 5.158443] systemd-journald[1592]: Received request to flush runtime journal from PID 1 [ 5.201856] k3-dma f7370000.dma: initialized [ 5.274730] mmc mmc2:0001: mmc_sdio_runtime_resume [ 5.274813] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_pre_power_on clk_prepare_enable() [ 5.311065] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 5.352148] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 5.352169] mmc mmc2:0001: mmc_sdio_runtime_resume - ret=0 DONE [ 5.352237] wl1271_sdio mmc2:0001:1: sdio_bus_probe [ 5.352244] wl1271_sdio mmc2:0001:1: sdio_bus_probe - pm_runtime_get_sync() [ 5.352251] wl1271_sdio mmc2:0001:1: sdio_bus_runtime_resume [ 5.352303] wl1271_sdio mmc2:0001:1: sdio_bus_probe - ERR call pm_runtime_put_noidle() [ 5.352334] sdio mmc2:0001:1: sdio_bus_runtime_suspend [ 5.352351] mmc mmc2:0001: mmc_sdio_runtime_suspend [ 5.352411] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_power_off clk_disable_unprepare() [ 5.353713] mmc mmc2:0001: mmc_sdio_runtime_suspend - DONE [ 5.353854] mmc mmc2:0001: mmc_sdio_runtime_resume [ 5.353877] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_pre_power_on clk_prepare_enable() [ 5.386849] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 5.441732] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 5.441753] mmc mmc2:0001: mmc_sdio_runtime_resume - ret=0 DONE [ 5.441807] wl1271_sdio mmc2:0001:2: sdio_bus_probe [ 5.441816] wl1271_sdio mmc2:0001:2: sdio_bus_probe - pm_runtime_get_sync() [ 5.441823] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 5.442065] wl1271_sdio mmc2:0001:2: sdio PM caps = 0x0 [ 5.442072] wl1271_sdio mmc2:0001:2: chip_family is wl18xx [ 5.442084] wl1271_sdio mmc2:0001:2: About to add core dev (child)... [ 5.442564] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 5.442582] wl1271_sdio mmc2:0001:2: ...added core dev (child) - probe complete! [ 5.442588] wl1271_sdio mmc2:0001:2: sdio_bus_probe - probe OK [ 5.442672] mmc mmc2:0001: mmc_sdio_runtime_suspend [ 5.442734] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_power_off clk_disable_unprepare() [ 5.444122] mmc mmc2:0001: mmc_sdio_runtime_suspend - DONE [ 5.481727] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.488722] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.489716] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 5.489730] cfg80211: failed to load regulatory.db [ 5.560312] mmc mmc2:0001: mmc_sdio_runtime_resume [ 5.560344] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_pre_power_on clk_prepare_enable() [ 5.591249] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 5.652199] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 5.652221] mmc mmc2:0001: mmc_sdio_runtime_resume - ret=0 DONE [ 5.652235] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 5.653256] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 5.653269] mmc mmc2:0001: mmc_sdio_runtime_suspend [ 5.653324] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_power_off clk_disable_unprepare() [ 5.654652] wl18xx_driver wl18xx.3.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2 [ 5.654663] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2 [ 5.654667] wlcore: WARNING falling back to default config [ 5.654690] mmc mmc2:0001: mmc_sdio_runtime_suspend - DONE [ 5.683522] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP1 [ 5.683538] mmc mmc2:0001: mmc_sdio_runtime_resume [ 5.683566] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_pre_power_on clk_prepare_enable() [ 5.715041] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 5.768567] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 5.768587] mmc mmc2:0001: mmc_sdio_runtime_resume - ret=0 DONE [ 5.768599] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP2 [ 5.768605] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP3 [ 5.768610] mmc mmc2:0001: mmc_sdio_hw_reset [ 5.768668] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_power_off clk_disable_unprepare() [ 5.771229] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_pre_power_on clk_prepare_enable() [ 5.806938] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 5.849536] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 5.849555] mmc mmc2:0001: mmc_sdio_hw_reset - ret=0 DONE [ 5.849613] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP4 [ 5.849621] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP5 [ 6.057307] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 6.058866] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_off: STEP1 [ 6.058908] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_off: STEP2 [ 6.058916] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_off: STEP3 [ 6.058929] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_off: STEP4 [ 6.058939] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead. [ 6.058942] wlcore: WARNING This default nvs file can be removed from the file system [ 6.059360] mmc mmc2:0001: mmc_sdio_runtime_suspend [ 6.059431] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_power_off clk_disable_unprepare() [ 6.060764] mmc mmc2:0001: mmc_sdio_runtime_suspend - DONE [ 6.070262] wlcore: loaded [ 6.407037] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP1 [ 6.407055] mmc mmc2:0001: mmc_sdio_runtime_resume [ 6.407084] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_pre_power_on clk_prepare_enable() [ 6.438967] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 6.499607] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 6.499630] mmc mmc2:0001: mmc_sdio_runtime_resume - ret=0 DONE [ 6.499643] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP2 [ 6.499650] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP3 [ 6.499656] mmc mmc2:0001: mmc_sdio_hw_reset [ 6.499715] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_power_off clk_disable_unprepare() [ 6.502401] dwmmc_k3 f723f000.dwmmc2: mmc_pwrseq_simple_pre_power_on clk_prepare_enable() [ 6.535419] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31) [ 6.593615] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0) [ 6.593636] mmc mmc2:0001: mmc_sdio_hw_reset - ret=0 DONE [ 6.593713] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP4 [ 6.593721] wl1271_sdio mmc2:0001:2: wl12xx_sdio_power_on: STEP5 [ 7.071691] wlcore: PHY firmware version: Rev 8.2.0.0.236 [ 7.097309] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 7.198175] wlcore: firmware booted (Rev 8.9.0.0.69) [ 7.220230] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.275524] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 7.288748] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 7.351658] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 7.352957] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 7.415441] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 7.442367] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 7.499248] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 7.664877] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 7.759207] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 7.813956] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 7.979209] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 8.041710] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 8.143207] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 11.511579] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 11.513676] wlan0: authenticate with 00:26:f2:a6:54:9b [ 11.518209] wlan0: send auth to 00:26:f2:a6:54:9b (try 1/3) [ 11.548949] wlan0: authenticated [ 11.551101] wlan0: associate with 00:26:f2:a6:54:9b (try 1/3) [ 11.555771] wlan0: RX AssocResp from 00:26:f2:a6:54:9b (capab=0x431 status=0 aid=4) [ 11.569988] wlan0: associated [ 11.583652] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 11.585286] wlcore: Association completed. [ 11.663208] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 11.903311] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 11.959544] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 12.223401] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 12.279756] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 13.247416] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 13.303324] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 13.999476] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 14.079304] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 14.239127] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 14.294940] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 17.119299] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 17.179547] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 19.573020] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 19.675205] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 23.795813] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 23.851205] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 23.903410] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 23.959755] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 23.969946] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 24.059205] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 24.543304] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 24.599606] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 29.422337] random: crng init done [ 29.422350] random: 7 urandom warning(s) missed due to ratelimiting [ 33.013600] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 33.067210] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 35.674097] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 35.735759] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 35.791301] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 35.887623] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 35.993765] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 36.083209] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 38.879248] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 38.939401] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend [ 46.327234] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_resume [ 46.382961] wl1271_sdio mmc2:0001:2: sdio_bus_runtime_suspend