[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190124195900.22620-20-jagan@amarulasolutions.com>
Date: Fri, 25 Jan 2019 01:28:57 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Maxime Ripard <maxime.ripard@...tlin.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>, Chen-Yu Tsai <wens@...e.org>,
Michael Turquette <mturquette@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org,
Michael Trimarchi <michael@...rulasolutions.com>,
linux-amarula@...rulasolutions.com, linux-sunxi@...glegroups.com,
Jagan Teki <jagan@...rulasolutions.com>
Subject: [DO NOT MERGE] [PATCH v6 19/22] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel
This patch add support for Bananapi S070WV20-CT16 DSI panel to
BPI-M64 board.
DSI panel connected via board DSI port with,
- DLDO1 as VDD supply
- PD6 gpio for reset pin
- PD5 gpio for backlight enable pin
- PD7 gpio for backlight vdd supply
Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 43 +++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index c99f66271287..14ecc57c72cf 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -45,6 +45,7 @@
#include "sun50i-a64.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "BananaPi-M64";
@@ -56,6 +57,15 @@
serial1 = &uart1;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <1 2 4 8 16 32 64 128 512>;
+ default-brightness-level = <2>;
+ enable-gpios = <&pio 3 5 GPIO_ACTIVE_HIGH>; /* LCD-BL-EN: PD5 */
+ power-supply = <®_vdd_backlight>;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -126,6 +136,15 @@
};
};
+ reg_vdd_backlight: vdd-backlight {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-backlight";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* LCD-PWR-EN: PD7 */
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
@@ -169,6 +188,24 @@
status = "okay";
};
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "bananapi,s070wv20-ct16-icn6211";
+ reg = <0>;
+ reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD6 */
+ vdd-supply = <®_dldo1>;
+ backlight = <&backlight>;
+ };
+};
+
&ehci0 {
status = "okay";
};
@@ -261,6 +298,12 @@
status = "okay";
};
+&r_pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_pwm_pin>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
--
2.18.0.321.gffc6fa0e3
Powered by blists - more mailing lists