linux-kernel - [PATCH 3.18 05/52] USB: storage: dont insert sane sense for SPC3+ when bad sense specified

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 24 Jan 2019 20:19:29 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Icenowy Zheng <icenowy@...c.io>,
        Alan Stern <stern@...land.harvard.edu>
Subject: [PATCH 3.18 05/52] USB: storage: dont insert sane sense for SPC3+ when bad sense specified

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Icenowy Zheng <icenowy@...c.io>

commit c5603d2fdb424849360fe7e3f8c1befc97571b8c upstream.

Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).

Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.

Signed-off-by: Icenowy Zheng <icenowy@...c.io>
Cc: stable <stable@...r.kernel.org>
Acked-by: Alan Stern <stern@...land.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/usb/storage/scsiglue.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -223,8 +223,12 @@ static int slave_configure(struct scsi_d
 		if (!(us->fflags & US_FL_NEEDS_CAP16))
 			sdev->try_rc_10_first = 1;
 
-		/* assume SPC3 or latter devices support sense size > 18 */
-		if (sdev->scsi_level > SCSI_SPC_2)
+		/*
+		 * assume SPC3 or latter devices support sense size > 18
+		 * unless US_FL_BAD_SENSE quirk is specified.
+		 */
+		if (sdev->scsi_level > SCSI_SPC_2 &&
+		    !(us->fflags & US_FL_BAD_SENSE))
 			us->fflags |= US_FL_SANE_SENSE;
 
 		/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable