[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1548314060-4833-2-git-send-email-shun-chih.yu@mediatek.com>
Date: Thu, 24 Jan 2019 15:14:19 +0800
From: <shun-chih.yu@...iatek.com>
To: Sean Wang <sean.wang@...iatek.com>, Vinod Koul <vkoul@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Dan Williams <dan.j.williams@...el.com>
CC: <dmaengine@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <srv_wsdupstream@...iatek.com>,
Shun-Chih Yu <shun-chih.yu@...iatek.com>
Subject: [PATCH v5 1/2] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
From: Shun-Chih Yu <shun-chih.yu@...iatek.com>
Document the devicetree bindings for MediaTek Command-Queue DMA controller
which could be found on MT6765 SoC or other similar Mediatek SoCs.
Signed-off-by: Shun-Chih Yu <shun-chih.yu@...iatek.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../devicetree/bindings/dma/mtk-cqdma.txt | 31 ++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.txt
diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.txt b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
new file mode 100644
index 0000000..fb12927
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
@@ -0,0 +1,31 @@
+MediaTek Command-Queue DMA Controller
+==================================
+
+Required properties:
+
+- compatible: Must be "mediatek,mt6765-cqdma" for MT6765.
+- reg: Should contain the base address and length for each channel.
+- interrupts: Should contain references to the interrupts for each channel.
+- clocks: Should be the clock specifiers corresponding to the entry in
+ clock-names property.
+- clock-names: Should contain "cqdma" entries.
+- dma-channels: The number of DMA channels supported by the controller.
+- dma-requests: The number of DMA request supported by the controller.
+- #dma-cells: The length of the DMA specifier, must be <1>. This one cell
+ in dmas property of a client device represents the channel
+ number.
+Example:
+
+ cqdma: dma-controller@...12000 {
+ compatible = "mediatek,mt6765-cqdma";
+ reg = <0 0x10212000 0 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_IFR_CQ_DMA>;
+ clock-names = "cqdma";
+ dma-channels = <2>;
+ dma-requests = <32>;
+ #dma-cells = <1>;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
--
1.7.9.5
Powered by blists - more mailing lists