| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 23 Jan 2019 18:47:28 +0100
From: Sebastian Reichel <sre@...nel.org>
To: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
Cc: Guenter Roeck <linux@...ck-us.net>, mazziesaccount@...il.com,
lee.jones@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
lgirdwood@...il.com, broonie@...nel.org,
gregkh@...uxfoundation.org, rafael@...nel.org,
mturquette@...libre.com, sboyd@...nel.org,
linus.walleij@...aro.org, bgolaszewski@...libre.com,
a.zummo@...ertech.it, alexandre.belloni@...tlin.com,
wim@...ux-watchdog.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-pm@...r.kernel.org,
linux-rtc@...r.kernel.org, linux-watchdog@...r.kernel.org,
mikko.mutanen@...rohmeurope.com, heikki.haikola@...rohmeurope.com
Subject: Re: [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM
BD70528 watchdog block
Hi,
On Tue, Jan 22, 2019 at 08:03:09PM +0200, Matti Vaittinen wrote:
> On Tue, Jan 22, 2019 at 09:40:56AM -0800, Guenter Roeck wrote:
> > On Tue, Jan 22, 2019 at 07:10:23PM +0200, Matti Vaittinen wrote:
> > > On Tue, Jan 22, 2019 at 07:47:50AM -0800, Guenter Roeck wrote:
> > > > On Tue, Jan 22, 2019 at 11:48:36AM +0200, Matti Vaittinen wrote:
> > > > > Initial support for watchdog block included in ROHM BD70528
> > > > > power management IC.
> > > > >
> > > > > Configurations for low power states are still to be checked.
> > > > >
> > > > > Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
> > > > > ---
> > > > > drivers/watchdog/Kconfig | 12 +++
> > > > > drivers/watchdog/Makefile | 1 +
> > > > > drivers/watchdog/bd70528_wdt.c | 161 +++++++++++++++++++++++++++++++++++++++++
> > > > > 3 files changed, 174 insertions(+)
> > > > > create mode 100644 drivers/watchdog/bd70528_wdt.c
> > > > >
> > > > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > > > > index 57f017d74a97..f30e3a3e886e 100644
> > > > > --- a/drivers/watchdog/Kconfig
> > > > > +++ b/drivers/watchdog/Kconfig
> > > > > @@ -90,6 +90,18 @@ config SOFT_WATCHDOG_PRETIMEOUT
> > > > > watchdog. Be aware that governors might affect the watchdog because it
> > > > > is purely software, e.g. the panic governor will stall it!
> > > > >
> > > > > +config BD70528_WATCHDOG
> > > > > + tristate "ROHM BD70528 PMIC Watchdog"
> > > > > + depends on MFD_ROHM_BD70528
> > > > > + select WATCHDOG_CORE
> > > > > + help
> > > > > + Support for the watchdog in the ROHM BD70528 PMIC. Watchdog trigger
> > > > > + cause system reset.
> > > > > +
> > > > > + Say Y here to include support for the ROHM BD70528 watchdog.
> > > > > + Alternatively say M to compile the driver as a module,
> > > > > + which will be called bd70528_wdt.
> > > > > +
> > > > > config DA9052_WATCHDOG
> > > > > tristate "Dialog DA9052 Watchdog"
> > > > > depends on PMIC_DA9052 || COMPILE_TEST
> > > > > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> > > > > index a0917ef28e07..1ce87a3b1172 100644
> > > > > --- a/drivers/watchdog/Makefile
> > > > > +++ b/drivers/watchdog/Makefile
> > > > > @@ -204,6 +204,7 @@ obj-$(CONFIG_WATCHDOG_SUN4V) += sun4v_wdt.o
> > > > > obj-$(CONFIG_XEN_WDT) += xen_wdt.o
> > > > >
> > > > > # Architecture Independent
> > > > > +obj-$(CONFIG_BD70528_WATCHDOG) += bd70528_wdt.o
> > > > > obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
> > > > > obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> > > > > obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
> > > > > diff --git a/drivers/watchdog/bd70528_wdt.c b/drivers/watchdog/bd70528_wdt.c
> > > > > new file mode 100644
> > > > > index 000000000000..e9a32566f595
> > > > > --- /dev/null
> > > > > +++ b/drivers/watchdog/bd70528_wdt.c
> > > > > @@ -0,0 +1,161 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > +// Copyright (C) 2018 ROHM Semiconductors
> > > > > +// ROHM BD70528MWV watchdog driver
> > > > > +
> > > > > +#include <linux/bcd.h>
> > > > > +#include <linux/kernel.h>
> > > > > +#include <linux/mfd/rohm-bd70528.h>
> > > > > +#include <linux/module.h>
> > > > > +#include <linux/of.h>
> > > > > +#include <linux/platform_device.h>
> > > > > +#include <linux/regmap.h>
> > > > > +#include <linux/watchdog.h>
> > > > > +
> > > > > +static int bd70528_wdt_set(struct bd70528 *bd70528, int enable)
> > > > > +{
> > > > > + int ret;
> > > > > +
> > > > > + if (bd70528->rtc_timer_lock)
> > > > > + mutex_lock(bd70528->rtc_timer_lock);
> > > >
> > > > This looks awkward. I don't think the if() is necessary.
> > >
> > > Right. Now when only bd70528 MFD driver uses this WDT this if is not
> > > required.
> > >
> > That doesn't warrant the conditional. It just bloats the code.
> > If there is only one user, the mutex will always be acquired.
>
> Yep. What I meant was that the only possible parent is bd70528 MFD
> driver which always initializes the mutex pointer. So pointer should be
> always set. I can imagine some other ROHM PMIC having almost identical
> watchdog block - in which case we might want to re-use this WDT driver
> with this PMIC. And if this PMIC has no RTC, then we may not need this
> mutex. But this is all speculation and I will remove check - or see how
> this changes when I see what to do with the driver's private data.
>
> > > > > +static const struct watchdog_info bd70528_wdt_info = {
> > > > > + .identity = "bd70528-wdt",
> > > > > + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> > > > > +};
> > > > > +
> > > > > +static const struct watchdog_ops bd70528_wdt_ops = {
> > > > > + .start = bd70528_wdt_start,
> > > > > + .stop = bd70528_wdt_stop,
> > > > > + /*
> > > > > + * bd70528 WDT ping is same as enable. Eg, writing 'enable' to enabled
> > > > > + * WDT will restart the timeout
> > > > > + */
> > > > Unnecessary comment.
> > > >
> > >
> > > Ok. I will remove the comment if this is obvious to others. For me it
> > > was not obvious. I was first writing a separate ping and start functions
> > > untill I realized that it is the same operation. But this was my first
> > > WDT driver so I don't know if this is a normal for all WDTs.
> > >
> > It is documented as part of the API.
> I'd better read the documentation then. Thanks for pointing this out.
> I'll remove the comment.
>
> > > > > +static int bd70528_wdt_probe(struct platform_device *pdev)
> > > > > +{
> > > > > + struct bd70528 *tmp;
> > > > > + struct bd70528 *bd70528;
> > > > > + int ret;
> > > > > +
> > > > > + tmp = dev_get_drvdata(pdev->dev.parent);
> > > > > + if (!tmp) {
> > > > > + dev_err(&pdev->dev, "No MFD driver data\n");
> > > > > + return -EINVAL;
> > > > > + }
> > > > > + bd70528 = devm_kzalloc(&pdev->dev, sizeof(*bd70528), GFP_KERNEL);
> > > > > + if (!bd70528)
> > > > > + return -ENOMEM;
> > > > > +
> > > > > + *bd70528 = *tmp;
> > > > > + bd70528->chip.dev = &pdev->dev;
> > > >
> > > > This is wrong.
> > > > You should not copy the parent's driver data but have local driver
> > > > data as needed which then points to the parent's driver data if
> > > > needed. I assume this is why the mutex is a pointer, but that
> > > > just shows that the whole approach is wrong.
> > >
> > > Mutex is a pointer because we want to use same mutex from WDT and RTC.
> > > We can sure point to parent data but then we still need our own dev
> > > pointer. So we can have a struct with pointer to parent data and dev
> > > pointer - but I'm not at all sure it is any clearer.
> >
> > As I said, that is wrong. To say it in plaintext, I won't accept
> > the driver if it copies the parent's driver data. The driver should
> > have and use its own driver data, and only maintain a pointer to
> > its parent's driver data. And most definitely you don't want to
> > copy and use any device data structure from the parent.
>
> Allright. At the moment the WDT driver only needs regmap pointer from
> parent. I'm not sure if it will later need DT or "chip type" - but I
> will change this.
You probably want to use this:
dev_get_regmap(pdev->dev.parent, NULL);
-- Sebastian
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists