lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190124180736.28408-3-jagan@amarulasolutions.com>
Date:   Thu, 24 Jan 2019 23:37:33 +0530
From:   Jagan Teki <jagan@...rulasolutions.com>
To:     Yong Deng <yong.deng@...ewell.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     linux-media@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org,
        Michael Trimarchi <michael@...rulasolutions.com>,
        linux-amarula@...rulasolutions.com, devicetree@...r.kernel.org,
        linux-sunxi@...glegroups.com,
        Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH v7 2/5] media: sun6i: Add A64 CSI block support

CSI block in Allwinner A64 has similar features as like in H3,
but the default CSI_SCLK rate cannot work properly to drive the
connected sensor interface.

The tested mod cock rate is 300 MHz and BSP vfe media driver is also
using the same rate. Unfortunately there is no valid information about
clock rate in manual or any other sources except the BSP driver. so more
faith on BSP code, because same has tested in mainline.

So, add support for A64 CSI block by setting updated mod clock rate.

Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index ee882b66a5ea..cd2d33242c17 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -15,6 +15,7 @@
 #include <linux/ioctl.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -154,6 +155,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi *csi,
 int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable)
 {
 	struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi);
+	struct device *dev = sdev->dev;
 	struct regmap *regmap = sdev->regmap;
 	int ret;
 
@@ -161,15 +163,20 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable)
 		regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, 0);
 
 		clk_disable_unprepare(sdev->clk_ram);
+		if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi"))
+			clk_rate_exclusive_put(sdev->clk_mod);
 		clk_disable_unprepare(sdev->clk_mod);
 		reset_control_assert(sdev->rstc_bus);
 		return 0;
 	}
 
+	if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi"))
+		clk_set_rate_exclusive(sdev->clk_mod, 300000000);
+
 	ret = clk_prepare_enable(sdev->clk_mod);
 	if (ret) {
 		dev_err(sdev->dev, "Enable csi clk err %d\n", ret);
-		return ret;
+		goto clk_mod_put;
 	}
 
 	ret = clk_prepare_enable(sdev->clk_ram);
@@ -192,6 +199,9 @@ int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable)
 	clk_disable_unprepare(sdev->clk_ram);
 clk_mod_disable:
 	clk_disable_unprepare(sdev->clk_mod);
+clk_mod_put:
+	if (of_device_is_compatible(dev->of_node, "allwinner,sun50i-a64-csi"))
+		clk_rate_exclusive_put(sdev->clk_mod);
 	return ret;
 }
 
@@ -895,6 +905,7 @@ static const struct of_device_id sun6i_csi_of_match[] = {
 	{ .compatible = "allwinner,sun6i-a31-csi", },
 	{ .compatible = "allwinner,sun8i-h3-csi", },
 	{ .compatible = "allwinner,sun8i-v3s-csi", },
+	{ .compatible = "allwinner,sun50i-a64-csi", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, sun6i_csi_of_match);
-- 
2.18.0.321.gffc6fa0e3

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ