lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <fbc58623-0b21-09e9-3e0f-71aaea934ba0@nvidia.com>
Date:   Fri, 25 Jan 2019 12:12:21 +0800
From:   Joseph Lo <josephl@...dia.com>
To:     Jon Hunter <jonathanh@...dia.com>,
        Thierry Reding <thierry.reding@...il.com>
CC:     <linux-tegra@...r.kernel.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 2/6] clocksource: tegra: add Tegra210 timer driver

On 1/24/19 7:09 PM, Jon Hunter wrote:
> 
> On 07/01/2019 03:28, Joseph Lo wrote:
>> Add support for the Tegra210 timer that runs at oscillator clock
>> (TMR10-TMR13). We need these timers to work as clock event device and to
>> replace the ARMv8 architected timer due to it can't survive across the
>> power cycle of the CPU core or CPUPORESET signal. So it can't be a wake-up
>> source when CPU suspends in power down state.
>>
>> Based on the work of Antti P Miettinen <amiettinen@...dia.com>
>>
>> Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
>> Cc: Thomas Gleixner <tglx@...utronix.de>
>> Cc: linux-kernel@...r.kernel.org
>> Signed-off-by: Joseph Lo <josephl@...dia.com>
>> ---
>>   drivers/clocksource/Kconfig          |   3 +
>>   drivers/clocksource/Makefile         |   1 +
>>   drivers/clocksource/timer-tegra210.c | 240 +++++++++++++++++++++++++++
>>   include/linux/cpuhotplug.h           |   1 +
>>   4 files changed, 245 insertions(+)
>>   create mode 100644 drivers/clocksource/timer-tegra210.c
>>
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index a9e26f6a81a1..e6e3e64b6320 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -135,6 +135,9 @@ config TEGRA_TIMER
>>   	help
>>   	  Enables support for the Tegra driver.
>>   
>> +config TEGRA210_TIMER
>> +	def_bool ARCH_TEGRA_210_SOC
>> +
>>   config VT8500_TIMER
>>   	bool "VT8500 timer driver" if COMPILE_TEST
>>   	depends on HAS_IOMEM
>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
>> index cdd210ff89ea..95de59c8a47b 100644
>> --- a/drivers/clocksource/Makefile
>> +++ b/drivers/clocksource/Makefile
>> @@ -36,6 +36,7 @@ obj-$(CONFIG_SUN4I_TIMER)	+= timer-sun4i.o
>>   obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
>>   obj-$(CONFIG_MESON6_TIMER)	+= timer-meson6.o
>>   obj-$(CONFIG_TEGRA_TIMER)	+= timer-tegra20.o
>> +obj-$(CONFIG_TEGRA210_TIMER)	+= timer-tegra210.o
>>   obj-$(CONFIG_VT8500_TIMER)	+= timer-vt8500.o
>>   obj-$(CONFIG_NSPIRE_TIMER)	+= timer-zevio.o
>>   obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
>> diff --git a/drivers/clocksource/timer-tegra210.c b/drivers/clocksource/timer-tegra210.c
>> new file mode 100644
>> index 000000000000..d88c127d3b3b
>> --- /dev/null
>> +++ b/drivers/clocksource/timer-tegra210.c
>> @@ -0,0 +1,240 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2014-2019, NVIDIA CORPORATION.  All rights reserved.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clockchips.h>
>> +#include <linux/cpu.h>
>> +#include <linux/cpumask.h>
>> +#include <linux/err.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/percpu.h>
>> +#include <linux/syscore_ops.h>
>> +
>> +static u32 tegra210_timer_freq;
>> +static void __iomem *tegra210_timer_reg_base;
>> +static u32 usec_config;
>> +
>> +#define TIMER_PTV		0x0
>> +#define TIMER_PTV_EN		BIT(31)
>> +#define TIMER_PTV_PER		BIT(30)
>> +#define TIMER_PCR		0x4
>> +#define TIMER_PCR_INTR_CLR	BIT(30)
>> +#define TIMERUS_CNTR_1US	0x10
>> +#define TIMERUS_USEC_CFG	0x14
>> +
>> +#define TIMER10_OFFSET		0x90
>> +
>> +#define TIMER_FOR_CPU(cpu) (TIMER10_OFFSET + (cpu) * 8)
>> +
>> +struct tegra210_clockevent {
>> +	struct clock_event_device evt;
>> +	char name[20];
>> +	void __iomem *reg_base;
>> +};
>> +#define to_tegra_cevt(p) (container_of(p, struct tegra210_clockevent, evt))
>> +
>> +static struct tegra210_clockevent __percpu *tegra210_evt;
>> +
>> +static int tegra210_timer_set_next_event(unsigned long cycles,
>> +					 struct clock_event_device *evt)
>> +{
>> +	struct tegra210_clockevent *tevt;
>> +
>> +	tevt = to_tegra_cevt(evt);
>> +	writel(TIMER_PTV_EN |
>> +	       ((cycles > 1) ? (cycles - 1) : 0), /* n+1 scheme */
>> +	       tevt->reg_base + TIMER_PTV);
>> +
>> +	return 0;
>> +}
>> +
>> +static inline void timer_shutdown(struct tegra210_clockevent *tevt)
>> +{
>> +	writel(0, tevt->reg_base + TIMER_PTV);
>> +}
>> +
>> +static int tegra210_timer_shutdown(struct clock_event_device *evt)
>> +{
>> +	struct tegra210_clockevent *tevt;
>> +
>> +	tevt = to_tegra_cevt(evt);
>> +	timer_shutdown(tevt);
>> +
>> +	return 0;
>> +}
>> +
>> +static int tegra210_timer_set_periodic(struct clock_event_device *evt)
>> +{
>> +	struct tegra210_clockevent *tevt;
>> +
>> +	tevt = to_tegra_cevt(evt);
>> +	writel(TIMER_PTV_EN | TIMER_PTV_PER | ((tegra210_timer_freq / HZ) - 1),
>> +	       tevt->reg_base + TIMER_PTV);
>> +
>> +	return 0;
>> +}
>> +
>> +static irqreturn_t tegra210_timer_isr(int irq, void *dev_id)
>> +{
>> +	struct tegra210_clockevent *tevt;
>> +
>> +	tevt = dev_id;
>> +	writel(TIMER_PCR_INTR_CLR, tevt->reg_base + TIMER_PCR);
>> +	tevt->evt.event_handler(&tevt->evt);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int tegra210_timer_setup(unsigned int cpu)
>> +{
>> +	struct tegra210_clockevent *tevt = per_cpu_ptr(tegra210_evt, cpu);
>> +
>> +	irq_force_affinity(tevt->evt.irq, cpumask_of(cpu));
>> +	enable_irq(tevt->evt.irq);
>> +
>> +	clockevents_config_and_register(&tevt->evt, tegra210_timer_freq,
>> +					1, /* min */
>> +					0x1fffffff); /* 29 bits */
>> +
>> +	return 0;
>> +}
>> +
>> +static int tegra210_timer_stop(unsigned int cpu)
>> +{
>> +	struct tegra210_clockevent *tevt = per_cpu_ptr(tegra210_evt, cpu);
>> +
>> +	tevt->evt.set_state_shutdown(&tevt->evt);
>> +	disable_irq_nosync(tevt->evt.irq);
>> +
>> +	return 0;
>> +}
>> +
>> +static int tegra_timer_suspend(void)
>> +{
>> +	int cpu;
>> +
>> +	for_each_possible_cpu(cpu) {
>> +		void __iomem *reg_base = tegra210_timer_reg_base +
>> +					 TIMER_FOR_CPU(cpu);
>> +		writel(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void tegra_timer_resume(void)
>> +{
>> +	writel(usec_config, tegra210_timer_reg_base + TIMERUS_USEC_CFG);
>> +}
>> +
>> +static struct syscore_ops tegra_timer_syscore_ops = {
>> +	.suspend = tegra_timer_suspend,
>> +	.resume = tegra_timer_resume,
>> +};
>> +
>> +static int __init tegra210_timer_init(struct device_node *np)
>> +{
>> +	int cpu, ret;
>> +	struct tegra210_clockevent *tevt;
>> +	struct clk *clk;
>> +
>> +	tegra210_evt = alloc_percpu(struct tegra210_clockevent);
>> +	if (!tegra210_evt)
>> +		return -ENOMEM;
>> +
>> +	tegra210_timer_reg_base = of_iomap(np, 0);
>> +	if (!tegra210_timer_reg_base)
>> +		return -ENXIO;
>> +
>> +	clk = of_clk_get(np, 0);
>> +	if (IS_ERR(clk))
>> +		return -EINVAL;
>> +
>> +	clk_prepare_enable(clk);
>> +	tegra210_timer_freq = clk_get_rate(clk);
>> +
>> +	for_each_possible_cpu(cpu) {
>> +		tevt = per_cpu_ptr(tegra210_evt, cpu);
>> +		tevt->reg_base = tegra210_timer_reg_base + TIMER_FOR_CPU(cpu);
>> +		tevt->evt.irq = irq_of_parse_and_map(np, cpu);
>> +		if (!tevt->evt.irq) {
>> +			pr_err("%s: can't map IRQ for CPU%d\n",
>> +			       __func__, cpu);
>> +			return -EINVAL;
>> +		}
>> +
>> +		snprintf(tevt->name, ARRAY_SIZE(tevt->name),
>> +			 "tegra210_timer%d", cpu);
>> +		tevt->evt.name = tevt->name;
>> +		tevt->evt.cpumask = cpumask_of(cpu);
>> +		tevt->evt.set_next_event = tegra210_timer_set_next_event;
>> +		tevt->evt.set_state_shutdown = tegra210_timer_shutdown;
>> +		tevt->evt.set_state_periodic = tegra210_timer_set_periodic;
>> +		tevt->evt.set_state_oneshot = tegra210_timer_shutdown;
>> +		tevt->evt.tick_resume = tegra210_timer_shutdown;
>> +		tevt->evt.features = CLOCK_EVT_FEAT_PERIODIC |
>> +			CLOCK_EVT_FEAT_ONESHOT;
>> +		tevt->evt.rating = 460;
>> +
>> +		irq_set_status_flags(tevt->evt.irq, IRQ_NOAUTOEN);
>> +		ret = request_irq(tevt->evt.irq, tegra210_timer_isr,
>> +				  IRQF_TIMER | IRQF_NOBALANCING,
>> +				  tevt->name, tevt);
>> +		if (ret) {
>> +			pr_err("%s: cannot setup irq %d for CPU%d\n",
>> +				__func__, tevt->evt.irq, cpu);
>> +			return -EINVAL;
>> +		}
>> +	}
>> +
>> +	/*
>> +	 * Configure microsecond timers to have 1MHz clock
>> +	 * Config register is 0xqqww, where qq is "dividend", ww is "divisor"
>> +	 * Uses n+1 scheme
>> +	 */
>> +	switch (tegra210_timer_freq) {
>> +	case 12000000:
>> +		usec_config = 0x000b; /* (11+1)/(0+1) */
>> +		break;
>> +	case 12800000:
>> +		usec_config = 0x043f; /* (63+1)/(4+1) */
>> +		break;
>> +	case 13000000:
>> +		usec_config = 0x000c; /* (12+1)/(0+1) */
>> +		break;
>> +	case 16800000:
>> +		usec_config = 0x0453; /* (83+1)/(4+1) */
>> +		break;
>> +	case 19200000:
>> +		usec_config = 0x045f; /* (95+1)/(4+1) */
>> +		break;
>> +	case 26000000:
>> +		usec_config = 0x0019; /* (25+1)/(0+1) */
>> +		break;
>> +	case 38400000:
>> +		usec_config = 0x04bf; /* (191+1)/(4+1) */
>> +		break;
>> +	case 48000000:
>> +		usec_config = 0x002f; /* (47+1)/(0+1) */
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	writel(usec_config, tegra210_timer_reg_base + TIMERUS_USEC_CFG);
>> +
>> +	cpuhp_setup_state(CPUHP_AP_TEGRA_TIMER_STARTING,
>> +			  "AP_TEGRA_TIMER_STARTING", tegra210_timer_setup,
>> +			  tegra210_timer_stop);
>> +
>> +	register_syscore_ops(&tegra_timer_syscore_ops);
>> +
>> +	return 0;
>> +}
> 
> A couple comments with the above init function ...
> 1. Does not appear to clean-up after itself on error.

Ah, sorry, this is because any kinds of error which cause this driver 
fails to init the device will just be stuck after we enable CPU idle 
with C7 state due to armv8 timer is not able to wake it up. So I 
originally thought the clean-up was unnecessary. Anyway, will fix it.

> 2. What about the other TMRs? Do we have any use for these?
> 

In this driver, only TMR10-TMR13 are used. We have another driver 
(tegra-wdt) which uses TMR5 for watchdog timer.

Thanks,
Joseph

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ