linux-kernel - [PATCH] net: phy: at803x: Use helpers to access MMD PHY registers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190125123510.20511-1-ccaione@baylibre.com>
Date:   Fri, 25 Jan 2019 12:35:10 +0000
From:   Carlo Caione <ccaione@...libre.com>
To:     andrew@...n.ch, f.fainelli@...il.com, hkallweit1@...il.com,
        davem@...emloft.net, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Carlo Caione <ccaione@...libre.com>
Subject: [PATCH] net: phy: at803x: Use helpers to access MMD PHY registers

Libphy provides a standard set of helpers to access the MMD PHY
registers. Use those instead of relying on custom driver-specific
functions.

Signed-off-by: Carlo Caione <ccaione@...libre.com>
---
 drivers/net/phy/at803x.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index f9432d053a22..23ba76f8d950 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -39,9 +39,6 @@
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
 #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
-#define AT803X_MMD_ACCESS_CONTROL		0x0D
-#define AT803X_MMD_ACCESS_CONTROL_DATA		0x0E
-#define AT803X_FUNC_DATA			0x4003
 #define AT803X_REG_CHIP_CONFIG			0x1f
 #define AT803X_BT_BX_REG_SEL			0x8000
 
@@ -168,16 +165,9 @@ static int at803x_set_wol(struct phy_device *phydev,
 		if (!is_valid_ether_addr(mac))
 			return -EINVAL;
 
-		for (i = 0; i < 3; i++) {
-			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
-				  AT803X_DEVICE_ADDR);
-			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
-				  offsets[i]);
-			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
-				  AT803X_FUNC_DATA);
-			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
-				  mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
-		}
+		for (i = 0; i < 3; i++)
+			phy_write_mmd(phydev, AT803X_DEVICE_ADDR, offsets[i],
+				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
 
 		value = phy_read(phydev, AT803X_INTR_ENABLE);
 		value |= AT803X_INTR_ENABLE_WOL;
-- 
2.19.1