linux-kernel - [PATCH 6/9] arm: dts: qcom: apq8064: add interrupt controller properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190125162302.14036-7-masneyb@onstation.org>
Date:   Fri, 25 Jan 2019 11:22:59 -0500
From:   Brian Masney <masneyb@...tation.org>
To:     linus.walleij@...aro.org, sboyd@...nel.org,
        bjorn.andersson@...aro.org, andy.gross@...aro.org,
        marc.zyngier@....com, lee.jones@...aro.org
Cc:     tglx@...utronix.de, shawnguo@...nel.org, dianders@...omium.org,
        linux-gpio@...r.kernel.org, nicolas.dechesne@...aro.org,
        niklas.cassel@...aro.org, david.brown@...aro.org,
        robh+dt@...nel.org, mark.rutland@....com, thierry.reding@...il.com,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: [PATCH 6/9] arm: dts: qcom: apq8064: add interrupt controller properties

Add interrupt controller properties now that ssbi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.

This change was not tested on any hardware but the same change was
tested on qcom-pm8941.dtsi with spmi-gpio using a LG Nexus 5
(hammerhead) phone with no issues.

Signed-off-by: Brian Masney <masneyb@...tation.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 46 ++---------------------------
 1 file changed, 2 insertions(+), 44 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 48c3cf427610..4744fe757cf4 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -705,50 +705,8 @@
 					compatible = "qcom,pm8921-gpio",
 						     "qcom,ssbi-gpio";
 					reg = <0x150>;
-					interrupts = <192 IRQ_TYPE_NONE>,
-						     <193 IRQ_TYPE_NONE>,
-						     <194 IRQ_TYPE_NONE>,
-						     <195 IRQ_TYPE_NONE>,
-						     <196 IRQ_TYPE_NONE>,
-						     <197 IRQ_TYPE_NONE>,
-						     <198 IRQ_TYPE_NONE>,
-						     <199 IRQ_TYPE_NONE>,
-						     <200 IRQ_TYPE_NONE>,
-						     <201 IRQ_TYPE_NONE>,
-						     <202 IRQ_TYPE_NONE>,
-						     <203 IRQ_TYPE_NONE>,
-						     <204 IRQ_TYPE_NONE>,
-						     <205 IRQ_TYPE_NONE>,
-						     <206 IRQ_TYPE_NONE>,
-						     <207 IRQ_TYPE_NONE>,
-						     <208 IRQ_TYPE_NONE>,
-						     <209 IRQ_TYPE_NONE>,
-						     <210 IRQ_TYPE_NONE>,
-						     <211 IRQ_TYPE_NONE>,
-						     <212 IRQ_TYPE_NONE>,
-						     <213 IRQ_TYPE_NONE>,
-						     <214 IRQ_TYPE_NONE>,
-						     <215 IRQ_TYPE_NONE>,
-						     <216 IRQ_TYPE_NONE>,
-						     <217 IRQ_TYPE_NONE>,
-						     <218 IRQ_TYPE_NONE>,
-						     <219 IRQ_TYPE_NONE>,
-						     <220 IRQ_TYPE_NONE>,
-						     <221 IRQ_TYPE_NONE>,
-						     <222 IRQ_TYPE_NONE>,
-						     <223 IRQ_TYPE_NONE>,
-						     <224 IRQ_TYPE_NONE>,
-						     <225 IRQ_TYPE_NONE>,
-						     <226 IRQ_TYPE_NONE>,
-						     <227 IRQ_TYPE_NONE>,
-						     <228 IRQ_TYPE_NONE>,
-						     <229 IRQ_TYPE_NONE>,
-						     <230 IRQ_TYPE_NONE>,
-						     <231 IRQ_TYPE_NONE>,
-						     <232 IRQ_TYPE_NONE>,
-						     <233 IRQ_TYPE_NONE>,
-						     <234 IRQ_TYPE_NONE>,
-						     <235 IRQ_TYPE_NONE>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
-- 
2.17.2