lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190125211335.65783-1-olof@lixom.net>
Date:   Fri, 25 Jan 2019 13:13:35 -0800
From:   Olof Johansson <olof@...om.net>
To:     linux-kernel@...r.kernel.org
Cc:     linux-accelerators@...ts.ozlabs.org,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Frederic Barrat <fbarrat@...ux.ibm.com>,
        Andrew Donnellan <andrew.donnellan@....ibm.com>,
        ogabbay@...ana.ai, airlied@...hat.com, jglisse@...hat.com,
        Olof Johansson <olof@...om.net>
Subject: [PATCH v2 1/5] drivers/accel: Introduce subsystem

We're starting to see more of these kind of devices, the current
upcoming wave will likely be around machine learning and inference
engines. A few drivers have been added to drivers/misc for this, but
it's timely to make it into a separate group of drivers/subsystem, to
make it easier to find them, and to encourage collaboration between
contributors.

Over time, we expect to build shared frameworks that the drivers will
make use of, but how that framework needs to look like to fill the needs
is still unclear, and the best way to gain that knowledge is to give the
disparate implementations a shared location.

There has been some controversy around expectations for userspace
stacks being open. The clear preference is to see that happen, and any
driver and platform stack that is delivered like that will be given
preferential treatment, and at some point in the future it might
become the requirement. Until then, the bare minimum we need is an
open low-level userspace such that the driver and HW interfaces can be
exercised if someone is modifying the driver, even if the full details
of the workload are not always available.

Bootstrapping this with myself and Greg as maintainers (since the current
drivers will be moving out of drivers/misc). Looking forward to expanding
that group over time.

Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Olof Johansson <olof@...om.net>
---

v2: 
I had missed a git add of the Documentation/ piece, which is the most
important piece of this anyway. Sigh.

 Documentation/accelerators/README.rst | 42 +++++++++++++++++++++++++++++++++++
 MAINTAINERS                           |  8 +++++++
 drivers/Kconfig                       |  2 ++
 drivers/Makefile                      |  1 +
 drivers/accel/Kconfig                 | 16 +++++++++++++
 drivers/accel/Makefile                |  5 +++++
 6 files changed, 74 insertions(+)
 create mode 100644 Documentation/accelerators/README.rst
 create mode 100644 drivers/accel/Kconfig
 create mode 100644 drivers/accel/Makefile

diff --git a/Documentation/accelerators/README.rst b/Documentation/accelerators/README.rst
new file mode 100644
index 0000000000000..79049ff99e93e
--- /dev/null
+++ b/Documentation/accelerators/README.rst
@@ -0,0 +1,42 @@
+.. _readme:
+
+Hardware offload accelerator subsystem
+======================================
+
+This is a brief overview of the subsystem (grouping) of hardware
+accelerators kept under drivers/accel
+
+Types of hardware supported
+---------------------------
+
+  The general types of hardware supported are hardware devices that has
+  general interactions of sending commands and buffers to the hardware,
+  returning completions and possible filled buffers back, together
+  with the usual driver pieces around hardware control, setup, error
+  handling, etc.
+
+  Drivers that fit into other subsystems are expected to be merged
+  there, and use the appropriate userspace interfaces of said functional
+  areas. We don't expect to see drivers for network, storage, graphics
+  and similar hardware implemented by drivers here.
+
+Expectations for contributions
+------------------------------
+
+ - Platforms and hardware that has fully open stacks, from Firmware to
+   Userspace, are always going to be given preferential treatment. These
+   platforms give the best insight for behavior and interaction of all
+   layers, including ability to improve implementation across the stack
+   over time.
+
+ - If a platform is partially proprietary, it is still expected that the
+   portions that interact the driver can be shared in a form that allows
+   for exercising the hardware/driver and evolution of the interface over
+   time. This could be separated into a shared library and test/sample
+   programs, for example.
+
+ - Over time, there is an expectation to converge drivers over to shared
+   frameworks and interfaces. Until then, the general rule is that no
+   more than one driver per vendor will be acceptable. For vendors that
+   aren't participating in the work towards shared frameworks over time,
+   we reserve the right to phase out support for the hardware.
diff --git a/MAINTAINERS b/MAINTAINERS
index ddcdc29dfe1f6..8a9bbaf8f6e90 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7033,6 +7033,14 @@ W:	https://linuxtv.org
 S:	Supported
 F:	drivers/media/platform/sti/hva
 
+HW ACCELERATOR OFFLOAD SUBSYSTEM
+M:	Olof Johansson <olof@...om.net>
+M:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
+L:	linux-accelerators@...ts.ozlabs.org
+S:	Supported
+F:	drivers/accel/
+F:	Documentation/accelerators/
+
 HWPOISON MEMORY FAILURE HANDLING
 M:	Naoya Horiguchi <n-horiguchi@...jp.nec.com>
 L:	linux-mm@...ck.org
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 4f9f99057ff85..3cc461f325569 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -228,4 +228,6 @@ source "drivers/siox/Kconfig"
 
 source "drivers/slimbus/Kconfig"
 
+source "drivers/accel/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 04da7876032cc..e4be06579cc5d 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -186,3 +186,4 @@ obj-$(CONFIG_MULTIPLEXER)	+= mux/
 obj-$(CONFIG_UNISYS_VISORBUS)	+= visorbus/
 obj-$(CONFIG_SIOX)		+= siox/
 obj-$(CONFIG_GNSS)		+= gnss/
+obj-$(CONFIG_ACCEL)		+= accel/
diff --git a/drivers/accel/Kconfig b/drivers/accel/Kconfig
new file mode 100644
index 0000000000000..13b36c0398895
--- /dev/null
+++ b/drivers/accel/Kconfig
@@ -0,0 +1,16 @@
+#
+# Drivers for hardware offload accelerators
+# See Documentation/accel/README.rst for more details
+#
+
+menuconfig ACCEL
+	bool "Hardware offload accelerator support"
+        help
+	  HW offload accelerators are used for high-bandwidth workloads
+	  where a higher-level kernel/userspace interface isn't suitable.
+
+if ACCEL
+
+comment "HW Accellerator drivers"
+
+endif
diff --git a/drivers/accel/Makefile b/drivers/accel/Makefile
new file mode 100644
index 0000000000000..343bbb8f45a14
--- /dev/null
+++ b/drivers/accel/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for accel devices
+#
+
-- 
2.11.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ