lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87zhrl96y3.fsf@ni.com>
Date:   Sun, 27 Jan 2019 22:33:24 +0200
From:   Ioan-Adrian Ratiu <adi@...rat.com>
To:     Stefan Wahren <stefan.wahren@...e.com>
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        stable@...r.kernel.org
Subject: Re: [RFC][PATCH] Revert "ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs"

Link to the full 4.19.18 config I'm using:

https://drive.google.com/open?id=1ZI3MeGB2fkYMsEjzGQYXUk2wqr0h9h7R

On Sun, 27 Jan 2019, Ioan-Adrian Ratiu <adi@...rat.com> wrote:
> This reverts commit bea8a160c621d19f7f78b13e14e03f4b8e44cd4b.
>
> Contrary to what the commit message says, on my rpi 3 b v1.2 changing
> the polarity causes the exact behaviour this commit intends to fix, as
> described at the referenced link below (wlan0 disapears).
>
> With reset-gpios = ... GPIO_ACTIVE_HIGH, brcmfmac errors in dmesg:
>
> [    7.977512] brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110
> [    7.977623] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
> [    7.978007] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
> [    7.978377] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
> [    7.978724] brcmfmac: brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
> [    7.978734] brcmfmac: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
> [    7.978747] brcmfmac: brcmf_cfg80211_get_channel: chanspec failed (-110)
> [    7.982817] brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110
> [    7.982880] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
> [    7.983255] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
>
> The only solution I currently have is to revert and everything works
> as expected and as before changing the polarity.
>
> Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443
> Signed-off-by: Ioan-Adrian Ratiu <adi@...rat.com>
> ---
>  arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +-
>  arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
> index 93762244be7f..4adb85e66be3 100644
> --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
> @@ -31,7 +31,7 @@
>  
>  	wifi_pwrseq: wifi-pwrseq {
>  		compatible = "mmc-pwrseq-simple";
> -		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
> +		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> index 89e6fd547c75..c318bcbc6ba7 100644
> --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> @@ -26,7 +26,7 @@
>  
>  	wifi_pwrseq: wifi-pwrseq {
>  		compatible = "mmc-pwrseq-simple";
> -		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
> +		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
>  	};
>  };
>  
> -- 
> 2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ