linux-kernel - [PATCH 5/7] cpufreq: scmi: Register an Energy Model

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190128165522.31749-6-quentin.perret@arm.com>
Date:   Mon, 28 Jan 2019 16:55:20 +0000
From:   Quentin Perret <quentin.perret@....com>
To:     rjw@...ysocki.net, viresh.kumar@...aro.org, sudeep.holla@....com,
        liviu.dudau@....com, lorenzo.pieralisi@....com, robh+dt@...nel.org,
        mark.rutland@....com, nm@...com, sboyd@...nel.org
Cc:     linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
        dietmar.eggemann@....com, mka@...omium.org, quentin.perret@....com
Subject: [PATCH 5/7] cpufreq: scmi: Register an Energy Model

The Energy Model (EM) framework provides an API to register the active
power of CPUs. Call this API from the scmi-cpufreq driver by using the
power costs obtained from firmware. This is done to ensure interested
subsystems (the task scheduler, for example) can make use of the EM
when available.

Signed-off-by: Quentin Perret <quentin.perret@....com>
---
 drivers/cpufreq/scmi-cpufreq.c | 36 +++++++++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 50b1551ba894..80a7f8da7e74 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -12,6 +12,7 @@
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/cpu_cooling.h>
+#include <linux/energy_model.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/pm_opp.h>
@@ -103,13 +104,42 @@ scmi_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
 	return 0;
 }
 
+static int __maybe_unused
+scmi_get_cpu_power(unsigned long *power, unsigned long *KHz, int cpu)
+{
+	struct device *cpu_dev = get_cpu_device(cpu);
+	unsigned long Hz;
+	int ret, domain;
+
+	if (!cpu_dev) {
+		pr_err("failed to get cpu%d device\n", cpu);
+		return -ENODEV;
+	}
+
+	domain = handle->perf_ops->device_domain_id(cpu_dev);
+	if (domain < 0)
+		return domain;
+
+	/* Get the power cost of the performance domain. */
+	Hz = *KHz * 1000;
+	ret = handle->perf_ops->est_power_get(handle, domain, &Hz, power);
+	if (ret)
+		return ret;
+
+	/* The EM framework specifies the frequency in KHz. */
+	*KHz = Hz / 1000;
+
+	return 0;
+}
+
 static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 {
-	int ret;
+	int ret, nr_opp;
 	unsigned int latency;
 	struct device *cpu_dev;
 	struct scmi_data *priv;
 	struct cpufreq_frequency_table *freq_table;
+	struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power);
 
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
@@ -142,6 +172,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 		ret = -EPROBE_DEFER;
 		goto out_free_opp;
 	}
+	nr_opp = ret;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
@@ -171,6 +202,9 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.transition_latency = latency;
 
 	policy->fast_switch_possible = true;
+
+	em_register_perf_domain(policy->cpus, nr_opp, &em_cb);
+
 	return 0;
 
 out_free_priv:
-- 
2.20.1