linux-kernel - Re: [PATCH v1 3/3] drivers/tty: increase priority for tty_buffer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 28 Jan 2019 09:05:30 +0100
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Linus Torvalds <torvalds@...ux-foundation.org>,
        Jiri Slaby <jslaby@...e.com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        lkml <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1 3/3] drivers/tty: increase priority for
 tty_buffer_worker



On 10.01.19 17:30, Greg Kroah-Hartman wrote:
> On Thu, Jan 10, 2019 at 04:19:53PM +0100, Oleksij Rempel wrote:
>>> My gut feel is that if somebody still cares deeply about serial line
>>> latency, they should look at trying to see if they can do some of the
>>> work directly without the bounce to the workqueue. We use workqueues
>>> for a reason, but it's possible that some of it could be avoided at
>>> least in special cases... And yours sounds like a special case.
>>
>> It is for industrial low latency RS-422 based application. The loopback
>> test is just easy way to test/reproduce it without additional hardware.
>>
>> What is good, mainlineable way to implement it?
> 
> What is the real problem your systems are having?  Are they serial-port
> limited?  Is latency a big issue?  Trying to tune for a fake workload
> isn't the best way to solve anything :)

The system in question is a high power laser cutter with live image-based inspection
and adjustment of the cutting process. In this setup the RS422 interface is used to
control parameters of the laser cutting unit in a tie control loop with the camera.
This loops needs to operate at 1000 Hz.

The xy-stage moves with a speed of approx. 60m/min, i.e. within 1ms it
moves about 1mm. For a high precision control process a jitter of ± 500 us (+/- 0.5mm)
is unacceptable.

Kind regards,
Oleksij Rempel

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |