lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190128054935.4972-3-vigneshr@ti.com>
Date:   Mon, 28 Jan 2019 11:19:35 +0530
From:   Vignesh R <vigneshr@...com>
To:     Boris Brezillon <bbrezillon@...nel.org>,
        <Tudor.Ambarus@...rochip.com>
CC:     Marek Vasut <marek.vasut@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        <linux-mtd@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Vignesh R <vigneshr@...com>
Subject: [PATCH v5 2/2] mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller

Cadence OSPI controller IP supports Octal IO (x8 IO lines),
It also has an integrated PHY. IP register layout is very
similar to existing QSPI IP except for additional bits to support Octal
and Octal DDR mode. Therefore, extend current driver to support Octal
mode. Only Octal SDR read (1-1-8)mode is supported for now.

Tested with mt35xu512aba Octal flash on TI's AM654 EVM.

Signed-off-by: Vignesh R <vigneshr@...com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
---

v5:
s/cqsi_base_hwcaps_mask/CQSPI_BASE_HWCAPS_MASK/g
Add back cqspi_driver_platdata definition for base compatible.

v4: Fix comments by Tudor on v3
v3: No changes
v2: Declare Octal mode capability based on compatible.

 drivers/mtd/spi-nor/cadence-quadspi.c | 58 +++++++++++++++++++++------
 1 file changed, 46 insertions(+), 12 deletions(-)

diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index 04cedd3a2bf6..c8113ebe44fd 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -44,6 +44,12 @@
 /* Quirks */
 #define CQSPI_NEEDS_WR_DELAY		BIT(0)
 
+/* Capabilities mask */
+#define CQSPI_BASE_HWCAPS_MASK					\
+	(SNOR_HWCAPS_READ | SNOR_HWCAPS_READ_FAST |		\
+	SNOR_HWCAPS_READ_1_1_2 | SNOR_HWCAPS_READ_1_1_4 |	\
+	SNOR_HWCAPS_PP)
+
 struct cqspi_st;
 
 struct cqspi_flash_pdata {
@@ -93,6 +99,11 @@ struct cqspi_st {
 	struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
 };
 
+struct cqspi_driver_platdata {
+	u32 hwcaps_mask;
+	u8 quirks;
+};
+
 /* Operation timeout value */
 #define CQSPI_TIMEOUT_MS			500
 #define CQSPI_READ_TIMEOUT_MS			10
@@ -101,6 +112,7 @@ struct cqspi_st {
 #define CQSPI_INST_TYPE_SINGLE			0
 #define CQSPI_INST_TYPE_DUAL			1
 #define CQSPI_INST_TYPE_QUAD			2
+#define CQSPI_INST_TYPE_OCTAL			3
 
 #define CQSPI_DUMMY_CLKS_PER_BYTE		8
 #define CQSPI_DUMMY_BYTES_MAX			4
@@ -911,6 +923,9 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read)
 		case SNOR_PROTO_1_1_4:
 			f_pdata->data_width = CQSPI_INST_TYPE_QUAD;
 			break;
+		case SNOR_PROTO_1_1_8:
+			f_pdata->data_width = CQSPI_INST_TYPE_OCTAL;
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -1213,21 +1228,22 @@ static void cqspi_request_mmap_dma(struct cqspi_st *cqspi)
 
 static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
 {
-	const struct spi_nor_hwcaps hwcaps = {
-		.mask = SNOR_HWCAPS_READ |
-			SNOR_HWCAPS_READ_FAST |
-			SNOR_HWCAPS_READ_1_1_2 |
-			SNOR_HWCAPS_READ_1_1_4 |
-			SNOR_HWCAPS_PP,
-	};
 	struct platform_device *pdev = cqspi->pdev;
 	struct device *dev = &pdev->dev;
+	const struct cqspi_driver_platdata *ddata;
+	struct spi_nor_hwcaps hwcaps;
 	struct cqspi_flash_pdata *f_pdata;
 	struct spi_nor *nor;
 	struct mtd_info *mtd;
 	unsigned int cs;
 	int i, ret;
 
+	ddata = of_device_get_match_data(dev);
+	if (!ddata)
+		hwcaps.mask = CQSPI_BASE_HWCAPS_MASK;
+	else
+		hwcaps.mask = ddata->hwcaps_mask;
+
 	/* Get flash device data */
 	for_each_available_child_of_node(dev->of_node, np) {
 		ret = of_property_read_u32(np, "reg", &cs);
@@ -1310,7 +1326,7 @@ static int cqspi_probe(struct platform_device *pdev)
 	struct cqspi_st *cqspi;
 	struct resource *res;
 	struct resource *res_ahb;
-	unsigned long data;
+	const struct cqspi_driver_platdata *ddata;
 	int ret;
 	int irq;
 
@@ -1377,8 +1393,8 @@ static int cqspi_probe(struct platform_device *pdev)
 	}
 
 	cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
-	data  = (unsigned long)of_device_get_match_data(dev);
-	if (data & CQSPI_NEEDS_WR_DELAY)
+	ddata  = of_device_get_match_data(dev);
+	if (ddata && (ddata->quirks & CQSPI_NEEDS_WR_DELAY))
 		cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC,
 						   cqspi->master_ref_clk_hz);
 
@@ -1460,14 +1476,32 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = {
 #define CQSPI_DEV_PM_OPS	NULL
 #endif
 
+static const struct cqspi_driver_platdata cdns_qspi = {
+	.hwcaps_mask = CQSPI_BASE_HWCAPS_MASK,
+};
+
+static const struct cqspi_driver_platdata k2g_qspi = {
+	.hwcaps_mask = CQSPI_BASE_HWCAPS_MASK,
+	.quirks = CQSPI_NEEDS_WR_DELAY,
+};
+
+static const struct cqspi_driver_platdata am654_ospi = {
+	.hwcaps_mask = CQSPI_BASE_HWCAPS_MASK | SNOR_HWCAPS_READ_1_1_8,
+	.quirks = CQSPI_NEEDS_WR_DELAY,
+};
+
 static const struct of_device_id cqspi_dt_ids[] = {
 	{
 		.compatible = "cdns,qspi-nor",
-		.data = (void *)0,
+		.data = &cdns_qspi,
 	},
 	{
 		.compatible = "ti,k2g-qspi",
-		.data = (void *)CQSPI_NEEDS_WR_DELAY,
+		.data = &k2g_qspi,
+	},
+	{
+		.compatible = "ti,am654-ospi",
+		.data = &am654_ospi,
 	},
 	{ /* end of table */ }
 };
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ