| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190128161306.27805-6-ben.whitten@lairdtech.com>
Date: Mon, 28 Jan 2019 16:12:59 +0000
From: Ben Whitten <ben.whitten@...il.com>
To: afaerber@...e.de
Cc: linux-lpwan@...ts.infradead.org,
Ben Whitten <ben.whitten@...il.com>,
"David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH lora-next 05/11] net: lora: sx130x: initialise AGC
From: Ben Whitten <ben.whitten@...il.com>
Initialisation of the AGC firmware requires a couple of steps to be
completed;
- Loading a TX LUT
- Loading the two MSBs for the radio tx synthesizer frequencies,
(Always 3 if f > 768 for SX1257 and SX1258 or f > 384 for SX1255)
- Loading a firmware option
- Finish initialisation by writing intended value of the radio select
register.
Signed-off-by: Ben Whitten <ben.whitten@...il.com>
---
drivers/net/lora/sx130x.c | 110 ++++++++++++++++++++++++++++++++++++++
drivers/net/lora/sx130x.h | 7 +++
2 files changed, 117 insertions(+)
diff --git a/drivers/net/lora/sx130x.c b/drivers/net/lora/sx130x.c
index 818a1c9192b3..18acfc8e934d 100644
--- a/drivers/net/lora/sx130x.c
+++ b/drivers/net/lora/sx130x.c
@@ -537,6 +537,111 @@ static int sx130x_load_all_firmware(struct sx130x_priv *priv)
return 0;
}
+static int sx130x_load_tx_gain_lut(struct sx130x_priv *priv)
+{
+ struct net_device *netdev = dev_get_drvdata(priv->dev);
+ struct sx130x_tx_gain_lut *lut = priv->tx_gain_lut;
+ unsigned int status, val;
+ int ret, i;
+
+ for (i = 0; i < priv->tx_gain_lut_size; i++) {
+ val = lut->pa_gain << SX1301_PA_GAIN_OFFSET;
+ val |= lut->dac_gain << SX1301_DAC_GAIN_OFFSET;
+ val |= lut->mix_gain;
+
+ netdev_info(netdev, "AGC LUT entry %d dBm: 0x%02x\n", lut->power, val);
+ ret = sx130x_agc_transaction(priv, val, &status);
+ if (ret) {
+ netdev_err(netdev, "AGC LUT load failed\n");
+ return ret;
+ }
+ if (status != (SX1301_AGC_STATUS_SUCCESS | i)) {
+ netdev_err(netdev, "AGC firmware LUT init error: 0x%02x", status);
+ return -ENXIO;
+ }
+ lut++;
+ }
+
+ /* Abort the transaction if there are less then 16 entries */
+ if (priv->tx_gain_lut_size < SX1301_TX_GAIN_LUT_MAX) {
+ ret = sx130x_agc_transaction(priv, SX1301_AGC_CMD_ABORT, &status);
+ if (ret) {
+ netdev_err(netdev, "AGC LUT abort failed\n");
+ return ret;
+ }
+ if (status != SX1301_AGC_STATUS_SUCCESS) {
+ netdev_err(netdev, "AGC firmware LUT abort error: 0x%02x", status);
+ return -ENXIO;
+ }
+ }
+
+ return ret;
+};
+
+static int sx130x_agc_init(struct sx130x_priv *priv)
+{
+ struct net_device *netdev = dev_get_drvdata(priv->dev);
+ unsigned int tx_msb;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(priv->regmap, SX1301_AGCSTS, &val);
+ if (ret) {
+ netdev_err(netdev, "AGC status read failed\n");
+ return ret;
+ }
+ if (val != SX1301_AGC_STATUS_READY) {
+ netdev_err(netdev, "AGC firmware init failure: 0x%02x\n", val);
+ return -ENXIO;
+ }
+
+ ret = sx130x_load_tx_gain_lut(priv);
+ if (ret)
+ return ret;
+
+ /*
+ * Load Tx freq MSBs
+ * Always 3 if f > 768 for SX1257 and SX1258 or f > 384 for SX1255
+ */
+ tx_msb = 3; /* TODO detect radio type */
+
+ ret = sx130x_agc_transaction(priv, tx_msb, &val);
+ if (ret) {
+ netdev_err(netdev, "AGC Tx MSBs load failed\n");
+ return ret;
+ }
+ if (val != (SX1301_AGC_STATUS_SUCCESS | tx_msb)) {
+ netdev_err(netdev, "AGC firmware Tx MSBs error: 0x%02x", val);
+ return -ENXIO;
+ }
+
+ /* Load chan_select firmware option */
+ ret = sx130x_agc_transaction(priv, 0, &val);
+ if (ret) {
+ netdev_err(netdev, "AGC chan select failed\n");
+ return ret;
+ }
+ if (val != (SX1301_AGC_STATUS_SUCCESS | 0)) {
+ netdev_err(netdev, "AGC firmware chan select error: 0x%02x", val);
+ return -ENXIO;
+ }
+
+ /* End AGC firmware init and check status */
+ /* TODO load the intended value of radio_select here
+ * LORA IF mapping to radio A/B (per bit, 0=A, 1=B) */
+ ret = sx130x_agc_transaction(priv, 0, &val);
+ if (ret) {
+ netdev_err(netdev, "AGC radio select failed\n");
+ return ret;
+ }
+ if (val != SX1301_AGC_STATUS_INITIALISED) {
+ netdev_err(netdev, "AGC firmware init error: 0x%02x", val);
+ return -ENXIO;
+ }
+
+ return ret;
+}
+
static netdev_tx_t sx130x_loradev_start_xmit(struct sk_buff *skb, struct net_device *netdev)
{
if (skb->protocol != htons(ETH_P_LORA)) {
@@ -589,6 +694,11 @@ static int sx130x_loradev_open(struct net_device *netdev)
if (ret)
goto err_firmware;
+ usleep_range(1000, 2000);
+ ret = sx130x_agc_init(priv);
+ if (ret)
+ goto err_firmware;
+
ret = open_loradev(netdev);
if (ret)
goto err_open;
diff --git a/drivers/net/lora/sx130x.h b/drivers/net/lora/sx130x.h
index 69bb9cbd1aba..2878dd3cc547 100644
--- a/drivers/net/lora/sx130x.h
+++ b/drivers/net/lora/sx130x.h
@@ -19,8 +19,15 @@
#define SX1301_MCU_AGC_CAL_FW_VERSION 2
#define SX1301_AGC_CMD_WAIT 16
+#define SX1301_AGC_CMD_ABORT 17
+
+#define SX1301_AGC_STATUS_READY 0x10
+#define SX1301_AGC_STATUS_SUCCESS 0x30
+#define SX1301_AGC_STATUS_INITIALISED 0x40
#define SX1301_TX_GAIN_LUT_MAX 16
+#define SX1301_PA_GAIN_OFFSET 6
+#define SX1301_DAC_GAIN_OFFSET 4
/* Page independent */
#define SX1301_PAGE 0x00
--
2.17.1
Powered by blists - more mailing lists