| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190129080926.36773-10-Zhiqiang.Hou@nxp.com>
Date: Tue, 29 Jan 2019 08:09:25 +0000
From: "Z.q. Hou" <zhiqiang.hou@....com>
To: "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"l.subrahmanya@...iveil.co.in" <l.subrahmanya@...iveil.co.in>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
Leo Li <leoyang.li@....com>,
"lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will.deacon@....com" <will.deacon@....com>
CC: Mingkai Hu <mingkai.hu@....com>,
"M.h. Lian" <minghuan.lian@....com>,
Xiaowei Bao <xiaowei.bao@....com>,
"Z.q. Hou" <zhiqiang.hou@....com>
Subject: [PATCHv3 09/27] PCI: mobiveil: correct inbound/outbound window setup
routines
From: Hou Zhiqiang <Zhiqiang.Hou@....com>
Outbound window routine:
- Removed unused var definition and register read operations.
- Added the upper 32-bit cpu address setup of the window.
- Instead of blindly write, only change the fields specified.
- Masked the lower bits of window size in case override the
control bits.
- Check if the passing window number is available, instead of
the total number of the initialized windows.
Inbound window routine:
- Added parameter 'u64 cpu_addr' to specify the cpu address
of the window instead of using 'pci_addr'.
- Changed 'int pci_addr' to 'u64 pci_addr', and added setup
of the upper 32-bit pci address of the window.
- Moved the PCIe PIO master enablement to mobiveil_host_init().
- Instead of blindly write, only change the fields specified.
- Masked the lower bits of window size in case override the
control bits.
- Check if the passing window number is available, instead of
the total number of the initialized windows.
- And added the statistic of initialized inbound windows.
Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host
Bridge IP driver")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@....com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@....com>
---
V3:
- No change
drivers/pci/controller/pcie-mobiveil.c | 70 +++++++++++++++-----------
1 file changed, 42 insertions(+), 28 deletions(-)
diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index e88afc792a5c..4ba458474e42 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -65,9 +65,13 @@
#define PAB_AXI_AMAP_CTRL(win) PAB_REG_ADDR(0x0ba0, win)
#define WIN_ENABLE_SHIFT 0
#define WIN_TYPE_SHIFT 1
+#define WIN_TYPE_MASK 0x3
+#define WIN_SIZE_SHIFT 10
+#define WIN_SIZE_MASK 0x3fffff
#define PAB_EXT_AXI_AMAP_SIZE(win) PAB_EXT_REG_ADDR(0xbaf0, win)
+#define PAB_EXT_AXI_AMAP_AXI_WIN(win) PAB_EXT_REG_ADDR(0x80a0, win)
#define PAB_AXI_AMAP_AXI_WIN(win) PAB_REG_ADDR(0x0ba4, win)
#define AXI_WINDOW_ALIGN_MASK 3
@@ -82,8 +86,10 @@
#define PAB_PEX_AMAP_CTRL(win) PAB_REG_ADDR(0x4ba0, win)
#define AMAP_CTRL_EN_SHIFT 0
#define AMAP_CTRL_TYPE_SHIFT 1
+#define AMAP_CTRL_TYPE_MASK 3
#define PAB_EXT_PEX_AMAP_SIZEN(win) PAB_EXT_REG_ADDR(0xbef0, win)
+#define PAB_EXT_PEX_AMAP_AXI_WIN(win) PAB_EXT_REG_ADDR(0xb4a0, win)
#define PAB_PEX_AMAP_AXI_WIN(win) PAB_REG_ADDR(0x4ba4, win)
#define PAB_PEX_AMAP_PEX_WIN_L(win) PAB_REG_ADDR(0x4ba8, win)
#define PAB_PEX_AMAP_PEX_WIN_H(win) PAB_REG_ADDR(0x4bac, win)
@@ -455,49 +461,51 @@ static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
}
static void program_ib_windows(struct mobiveil_pcie *pcie, int win_num,
- int pci_addr, u32 type, u64 size)
+ u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
{
- int pio_ctrl_val;
- int amap_ctrl_dw;
+ u32 value;
u64 size64 = ~(size - 1);
- if ((pcie->ib_wins_configured + 1) > pcie->ppio_wins) {
+ if (win_num >= pcie->ppio_wins) {
dev_err(&pcie->pdev->dev,
"ERROR: max inbound windows reached !\n");
return;
}
- pio_ctrl_val = csr_readl(pcie, PAB_PEX_PIO_CTRL);
- pio_ctrl_val |= 1 << PIO_ENABLE_SHIFT;
- csr_writel(pcie, pio_ctrl_val, PAB_PEX_PIO_CTRL);
-
- amap_ctrl_dw = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
- amap_ctrl_dw |= (type << AMAP_CTRL_TYPE_SHIFT) |
- (1 << AMAP_CTRL_EN_SHIFT) |
- lower_32_bits(size64);
- csr_writel(pcie, amap_ctrl_dw, PAB_PEX_AMAP_CTRL(win_num));
+ value = csr_readl(pcie, PAB_PEX_AMAP_CTRL(win_num));
+ value &= ~(AMAP_CTRL_TYPE_MASK << AMAP_CTRL_TYPE_SHIFT |
+ WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+ value |= (type << AMAP_CTRL_TYPE_SHIFT) | (1 << AMAP_CTRL_EN_SHIFT) |
+ (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+ csr_writel(pcie, value, PAB_PEX_AMAP_CTRL(win_num));
csr_writel(pcie, upper_32_bits(size64),
PAB_EXT_PEX_AMAP_SIZEN(win_num));
- csr_writel(pcie, pci_addr, PAB_PEX_AMAP_AXI_WIN(win_num));
+ csr_writel(pcie, lower_32_bits(cpu_addr),
+ PAB_PEX_AMAP_AXI_WIN(win_num));
+ csr_writel(pcie, upper_32_bits(cpu_addr),
+ PAB_EXT_PEX_AMAP_AXI_WIN(win_num));
+
+ csr_writel(pcie, lower_32_bits(pci_addr),
+ PAB_PEX_AMAP_PEX_WIN_L(win_num));
+ csr_writel(pcie, upper_32_bits(pci_addr),
+ PAB_PEX_AMAP_PEX_WIN_H(win_num));
- csr_writel(pcie, pci_addr, PAB_PEX_AMAP_PEX_WIN_L(win_num));
- csr_writel(pcie, 0, PAB_PEX_AMAP_PEX_WIN_H(win_num));
+ pcie->ib_wins_configured++;
}
/*
* routine to program the outbound windows
*/
static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
- u64 cpu_addr, u64 pci_addr,
- u32 config_io_bit, u64 size)
+ u64 cpu_addr, u64 pci_addr, u32 type, u64 size)
{
- u32 value, type;
+ u32 value;
u64 size64 = ~(size - 1);
- if ((pcie->ob_wins_configured + 1) > pcie->apio_wins) {
+ if (win_num >= pcie->apio_wins) {
dev_err(&pcie->pdev->dev,
"ERROR: max outbound windows reached !\n");
return;
@@ -507,10 +515,12 @@ static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
* program Enable Bit to 1, Type Bit to (00) base 2, AXI Window Size Bit
* to 4 KB in PAB_AXI_AMAP_CTRL register
*/
- type = config_io_bit;
value = csr_readl(pcie, PAB_AXI_AMAP_CTRL(win_num));
- csr_writel(pcie, 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
- lower_32_bits(size64), PAB_AXI_AMAP_CTRL(win_num));
+ value &= ~(WIN_TYPE_MASK << WIN_TYPE_SHIFT |
+ WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+ value |= 1 << WIN_ENABLE_SHIFT | type << WIN_TYPE_SHIFT |
+ (lower_32_bits(size64) & WIN_SIZE_MASK << WIN_SIZE_SHIFT);
+ csr_writel(pcie, value, PAB_AXI_AMAP_CTRL(win_num));
csr_writel(pcie, upper_32_bits(size64), PAB_EXT_AXI_AMAP_SIZE(win_num));
@@ -518,11 +528,10 @@ static void program_ob_windows(struct mobiveil_pcie *pcie, int win_num,
* program AXI window base with appropriate value in
* PAB_AXI_AMAP_AXI_WIN0 register
*/
- value = csr_readl(pcie, PAB_AXI_AMAP_AXI_WIN(win_num));
- csr_writel(pcie, cpu_addr & (~AXI_WINDOW_ALIGN_MASK),
+ csr_writel(pcie, lower_32_bits(cpu_addr) & (~AXI_WINDOW_ALIGN_MASK),
PAB_AXI_AMAP_AXI_WIN(win_num));
-
- value = csr_readl(pcie, PAB_AXI_AMAP_PEX_WIN_H(win_num));
+ csr_writel(pcie, upper_32_bits(cpu_addr),
+ PAB_EXT_AXI_AMAP_AXI_WIN(win_num));
csr_writel(pcie, lower_32_bits(pci_addr),
PAB_AXI_AMAP_PEX_WIN_L(win_num));
@@ -604,6 +613,11 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
value |= APIO_EN_MASK;
csr_writel(pcie, value, PAB_AXI_PIO_CTRL);
+ /* Enable PCIe PIO master */
+ value = csr_readl(pcie, PAB_PEX_PIO_CTRL);
+ value |= 1 << PIO_ENABLE_SHIFT;
+ csr_writel(pcie, value, PAB_PEX_PIO_CTRL);
+
/*
* we'll program one outbound window for config reads and
* another default inbound window for all the upstream traffic
@@ -616,7 +630,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
CFG_WINDOW_TYPE, resource_size(pcie->ob_io_res));
/* memory inbound translation window */
- program_ib_windows(pcie, WIN_NUM_0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
+ program_ib_windows(pcie, WIN_NUM_0, 0, 0, MEM_WINDOW_TYPE, IB_WIN_SIZE);
/* Get the I/O and memory ranges from DT */
resource_list_for_each_entry(win, &pcie->resources) {
--
2.17.1
Powered by blists - more mailing lists