| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190129113207.570735935@linuxfoundation.org>
Date: Tue, 29 Jan 2019 12:34:12 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Tom Lendacky <thomas.lendacky@....com>,
Shyam Sundar S K <Shyam-sundar.S-k@....com>,
"David S. Miller" <davem@...emloft.net>
Subject: [PATCH 4.20 001/117] amd-xgbe: Fix mdio access for non-zero ports and clause 45 PHYs
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Lendacky, Thomas" <Thomas.Lendacky@....com>
[ Upstream commit 5ab3121beeb76aa6090195b67d237115860dd9ec ]
The XGBE hardware has support for performing MDIO operations using an
MDIO command request. The driver mistakenly uses the mdio port address
as the MDIO command request device address instead of the MDIO command
request port address. Additionally, the driver does not properly check
for and create a clause 45 MDIO command.
Check the supplied MDIO register to determine if the request is a clause
45 operation (MII_ADDR_C45). For a clause 45 operation, extract the device
address and register number from the supplied MDIO register and use them
to set the MDIO command request device address and register number fields.
For a clause 22 operation, the MDIO request device address is set to zero
and the MDIO command request register number is set to the supplied MDIO
register. In either case, the supplied MDIO port address is used as the
MDIO command request port address.
Fixes: 732f2ab7afb9 ("amd-xgbe: Add support for MDIO attached PHYs")
Signed-off-by: Tom Lendacky <thomas.lendacky@....com>
Tested-by: Shyam Sundar S K <Shyam-sundar.S-k@....com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/ethernet/amd/xgbe/xgbe-common.h | 2 --
drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 22 ++++++++++++++++------
2 files changed, 16 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
@@ -431,8 +431,6 @@
#define MAC_MDIOSCAR_PA_WIDTH 5
#define MAC_MDIOSCAR_RA_INDEX 0
#define MAC_MDIOSCAR_RA_WIDTH 16
-#define MAC_MDIOSCAR_REG_INDEX 0
-#define MAC_MDIOSCAR_REG_WIDTH 21
#define MAC_MDIOSCCDR_BUSY_INDEX 22
#define MAC_MDIOSCCDR_BUSY_WIDTH 1
#define MAC_MDIOSCCDR_CMD_INDEX 16
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -1284,6 +1284,20 @@ static void xgbe_write_mmd_regs(struct x
}
}
+static unsigned int xgbe_create_mdio_sca(int port, int reg)
+{
+ unsigned int mdio_sca, da;
+
+ da = (reg & MII_ADDR_C45) ? reg >> 16 : 0;
+
+ mdio_sca = 0;
+ XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, RA, reg);
+ XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, PA, port);
+ XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, da);
+
+ return mdio_sca;
+}
+
static int xgbe_write_ext_mii_regs(struct xgbe_prv_data *pdata, int addr,
int reg, u16 val)
{
@@ -1291,9 +1305,7 @@ static int xgbe_write_ext_mii_regs(struc
reinit_completion(&pdata->mdio_complete);
- mdio_sca = 0;
- XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, REG, reg);
- XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, addr);
+ mdio_sca = xgbe_create_mdio_sca(addr, reg);
XGMAC_IOWRITE(pdata, MAC_MDIOSCAR, mdio_sca);
mdio_sccd = 0;
@@ -1317,9 +1329,7 @@ static int xgbe_read_ext_mii_regs(struct
reinit_completion(&pdata->mdio_complete);
- mdio_sca = 0;
- XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, REG, reg);
- XGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, addr);
+ mdio_sca = xgbe_create_mdio_sca(addr, reg);
XGMAC_IOWRITE(pdata, MAC_MDIOSCAR, mdio_sca);
mdio_sccd = 0;
Powered by blists - more mailing lists