[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20190129120621.GB7467@e107981-ln.cambridge.arm.com>
Date: Tue, 29 Jan 2019 12:06:21 +0000
From: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
To: Xiaowei Bao <xiaowei.bao@....com>, robh+dt@...nel.org
Cc: bhelgaas@...gle.com, mark.rutland@....com, shawnguo@...nel.org,
leoyang.li@....com, kishon@...com, arnd@...db.de,
gregkh@...uxfoundation.org, minghuan.Lian@....com,
mingkai.hu@....com, roy.zang@....com, kstewart@...uxfoundation.org,
cyrille.pitchen@...e-electrons.com, pombredanne@...b.com,
shawn.lin@...k-chips.com, niklas.cassel@...s.com,
linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linuxppc-dev@...ts.ozlabs.org
Subject: Re: [PATCHv5 1/4] dt-bindings: add DT binding for the layerscape
PCIe controller with EP mode
Rob,
Is it OK for you if I pull this series into the pci tree ?
Please let me know, thanks.
Lorenzo
On Mon, Jan 21, 2019 at 05:44:57PM +0800, Xiaowei Bao wrote:
> Add the documentation for the Device Tree binding for the layerscape PCIe
> controller with EP mode.
>
> Signed-off-by: Xiaowei Bao <xiaowei.bao@....com>
> Reviewed-by: Minghuan Lian <minghuan.lian@....com>
> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@....com>
> ---
> v2:
> - Add the SoC specific compatibles.
> v3:
> - modify the commit message.
> v4:
> - no change.
> v5:
> - no change.
>
> .../devicetree/bindings/pci/layerscape-pci.txt | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index 9b2b8d6..e20ceaa 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -13,6 +13,7 @@ information.
>
> Required properties:
> - compatible: should contain the platform identifier such as:
> + RC mode:
> "fsl,ls1021a-pcie"
> "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
> "fsl,ls2088a-pcie"
> @@ -20,6 +21,8 @@ Required properties:
> "fsl,ls1046a-pcie"
> "fsl,ls1043a-pcie"
> "fsl,ls1012a-pcie"
> + EP mode:
> + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
> - reg: base addresses and lengths of the PCIe controller register blocks.
> - interrupts: A list of interrupt outputs of the controller. Must contain an
> entry for each entry in the interrupt-names property.
> --
> 1.7.1
>
Powered by blists - more mailing lists