[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <1548771487.6869.5.camel@pengutronix.de>
Date: Tue, 29 Jan 2019 15:18:07 +0100
From: Lucas Stach <l.stach@...gutronix.de>
To: Eugeniy Paltsev <eugeniy.paltsev@...opsys.com>,
linux-snps-arc@...ts.infradead.org,
Vineet Gupta <vineet.gupta1@...opsys.com>
Cc: linux-kernel@...r.kernel.org,
Alexey Brodkin <alexey.brodkin@...opsys.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH] ARC: [plat-hsdk]: Add support of Vivante GPU
Am Dienstag, den 29.01.2019, 15:41 +0300 schrieb Eugeniy Paltsev:
> HSDK board has built-in Vivante GPU IP which works perfectly fine
> with Etnaviv driver, so let's use it.
>
> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
> ---
> NOTE:
> * this patch has prerequisite:
> https://patchwork.kernel.org/patch/10766265/
>
> arch/arc/boot/dts/hsdk.dts | 6 ++++++
> arch/arc/configs/hsdk_defconfig | 2 +-
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
> index 43f17b51ee89..ef892994f024 100644
> --- a/arch/arc/boot/dts/hsdk.dts
> +++ b/arch/arc/boot/dts/hsdk.dts
> @@ -237,6 +237,12 @@
> > reg = <0>;
> > };
> > };
> +
> > > + gpu_3d: gpu@...00 {
> > + compatible = "vivante,gc";
> > + reg = <0x90000 0x4000>;
> + interrupts = <28>;
Really no clock inputs? While the driver does not enforce this due to
backward compatibility issues, the binding says that some of the clocks
are mandatory. So I would really like to see them hooked up here, even
if it's just fixed always-on clocks.
Regards,
Lucas
> + };
> > };
>
> > memory@...00000 {
> diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
> index 87b23b7fb781..915e1cca31f8 100644
> --- a/arch/arc/configs/hsdk_defconfig
> +++ b/arch/arc/configs/hsdk_defconfig
> @@ -52,6 +52,7 @@ CONFIG_GPIO_DWAPB=y
> CONFIG_DRM=y
> # CONFIG_DRM_FBDEV_EMULATION is not set
> CONFIG_DRM_UDL=y
> +CONFIG_DRM_ETNAVIV=y
> CONFIG_FB=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_USB_EHCI_HCD=y
> @@ -63,7 +64,6 @@ CONFIG_MMC=y
> CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_PLTFM=y
> CONFIG_MMC_DW=y
> -# CONFIG_IOMMU_SUPPORT is not set
> CONFIG_EXT3_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_TMPFS=y
Powered by blists - more mailing lists