[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190130205552.8512-13-tanhuazhong@huawei.com>
Date: Thu, 31 Jan 2019 04:55:52 +0800
From: Huazhong Tan <tanhuazhong@...wei.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<huangdaode@...ilicon.com>, <yisen.zhuang@...wei.com>,
<salil.mehta@...wei.com>, <linuxarm@...wei.com>,
Jian Shen <shenjian15@...wei.com>,
Peng Li <lipeng321@...wei.com>,
Huazhong Tan <tanhuazhong@...wei.com>
Subject: [PATCH net-next 12/12] net: hns3: keep flow director state unchanged when reset
From: Jian Shen <shenjian15@...wei.com>
In orginal codes, driver always enables flow director when
intializing. When user disable flow director with command
ethtool -K, the flow director will be enabled again after
resetting.
This patch fixes it by only enabling it when first initialzing.
Fixes: 6871af29b3ab ("net: hns3: Add reset handle for flow director")
Signed-off-by: Jian Shen <shenjian15@...wei.com>
Signed-off-by: Peng Li <lipeng321@...wei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@...wei.com>
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 10 ++++++----
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 +-
2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index b531eac12fea..2ffbf07ff829 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1007,6 +1007,9 @@ static int hclge_configure(struct hclge_dev *hdev)
hdev->tm_info.hw_pfc_map = 0;
hdev->wanted_umv_size = cfg.umv_space;
+ if (hnae3_dev_fd_supported(hdev))
+ hdev->fd_en = true;
+
ret = hclge_parse_speed(cfg.default_speed, &hdev->hw.mac.speed);
if (ret) {
dev_err(&hdev->pdev->dev, "Get wrong speed ret=%d.\n", ret);
@@ -3973,7 +3976,6 @@ static int hclge_init_fd_config(struct hclge_dev *hdev)
return -EOPNOTSUPP;
}
- hdev->fd_cfg.fd_en = true;
hdev->fd_cfg.proto_support =
TCP_V4_FLOW | UDP_V4_FLOW | SCTP_V4_FLOW | TCP_V6_FLOW |
UDP_V6_FLOW | SCTP_V6_FLOW | IPV4_USER_FLOW | IPV6_USER_FLOW;
@@ -4731,7 +4733,7 @@ static int hclge_add_fd_entry(struct hnae3_handle *handle,
if (!hnae3_dev_fd_supported(hdev))
return -EOPNOTSUPP;
- if (!hdev->fd_cfg.fd_en) {
+ if (!hdev->fd_en) {
dev_warn(&hdev->pdev->dev,
"Please enable flow director first\n");
return -EOPNOTSUPP;
@@ -4884,7 +4886,7 @@ static int hclge_restore_fd_entries(struct hnae3_handle *handle)
return 0;
/* if fd is disabled, should not restore it when reset */
- if (!hdev->fd_cfg.fd_en)
+ if (!hdev->fd_en)
return 0;
hlist_for_each_entry_safe(rule, node, &hdev->fd_rule_list, rule_node) {
@@ -5170,7 +5172,7 @@ static void hclge_enable_fd(struct hnae3_handle *handle, bool enable)
struct hclge_vport *vport = hclge_get_vport(handle);
struct hclge_dev *hdev = vport->back;
- hdev->fd_cfg.fd_en = enable;
+ hdev->fd_en = enable;
if (!enable)
hclge_del_all_fd_entries(handle, false);
else
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 2c413c63c6c9..c939f4a7f5f0 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -583,7 +583,6 @@ struct hclge_fd_key_cfg {
struct hclge_fd_cfg {
u8 fd_mode;
- u8 fd_en;
u16 max_key_length;
u32 proto_support;
u32 rule_num[2]; /* rule entry number */
@@ -758,6 +757,7 @@ struct hclge_dev {
struct hclge_fd_cfg fd_cfg;
struct hlist_head fd_rule_list;
u16 hclge_fd_rule_num;
+ u8 fd_en;
u16 wanted_umv_size;
/* max available unicast mac vlan space */
--
2.20.1
Powered by blists - more mailing lists