[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJKOXPcfZsZPYStrV-QOd2YJsoaJdbtdz2RX-AJrC6A6B8vJqA@mail.gmail.com>
Date: Wed, 30 Jan 2019 10:46:40 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Lukasz Luba <l.luba@...tner.samsung.com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
Bartłomiej Żołnierkiewicz
<b.zolnierkie@...sung.com>, kgene@...nel.org,
Chanwoo Choi <cw00.choi@...sung.com>,
kyungmin.park@...sung.com,
Marek Szyprowski <m.szyprowski@...sung.com>,
s.nawrocki@...sung.com, myungjoo.ham@...sung.com,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 6/8] DT: arm: exynos: add DMC device for exynos5422
On Tue, 29 Jan 2019 at 18:55, Lukasz Luba <l.luba@...tner.samsung.com> wrote:
>
> Add description of Dynamic Memory Controller and PPMU counters.
> They are used by exynos5422-dmc driver.
>
> CC: Rob Herring <robh+dt@...nel.org>
> CC: Mark Rutland <mark.rutland@....com>
> CC: Kukjin Kim <kgene@...nel.org>
> CC: Krzysztof Kozlowski <krzk@...nel.org>
> CC: devicetree@...r.kernel.org
> CC: linux-arm-kernel@...ts.infradead.org
> CC: linux-samsung-soc@...r.kernel.org
> CC: linux-kernel@...r.kernel.org
> Signed-off-by: Lukasz Luba <l.luba@...tner.samsung.com>
> ---
> arch/arm/boot/dts/exynos5420.dtsi | 69 +++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 22 +++++++++
> 2 files changed, 91 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index aaff158..4d76335 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -235,6 +235,27 @@
> status = "disabled";
> };
>
> + dmc: memory-controller@...20000 {
> + compatible = "samsung,exynos5422-dmc";
> + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>,
> + <0x10030000 0x1000>, <0x10000000 0x1000>;
> + clocks = <&clock CLK_FOUT_SPLL>,
> + <&clock CLK_MOUT_SCLK_SPLL>,
> + <&clock CLK_FF_DOUT_SPLL2>,
> + <&clock CLK_FOUT_BPLL>, <&clock CLK_MOUT_BPLL>,
> + <&clock CLK_SCLK_BPLL>,
> + <&clock CLK_MOUT_MX_MSPLL_CCORE>,
> + <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>,
> + <&clock CLK_MOUT_MCLK_CDREX>,
> + <&clock CLK_DOUT_CLK2X_PHY0>,
> + <&clock CLK_CLKM_PHY0>, <&clock CLK_CLKM_PHY1>;
> + clock-names = "fout_spll", "mout_sclk_spll",
> + "ff_dout_spll2", "fout_bpll", "mout_bpll",
> + "sclk_bpll", "mout_mx_mspll_ccore",
> + "mout_mx_mspll_ccore_phy", "mout_mclk_cdrex",
> + "dout_clk2x_phy0", "clkm_phy0", "clkm_phy1";
We misunderstood each other. I did not ask for compaction into one
continued line but for proper indentation. Having one entry per one
line was fine because you have really a lot of entries and it was
making things easier to check.
It should look like:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/exynos54xx.dtsi?h=v4.20#n78
Best regards,
Krzysztof
Powered by blists - more mailing lists