linux-kernel - [patch 2/2] proc/stat: Make the interrupt statistics more efficient

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190130123615.592071954@linutronix.de>
Date:   Wed, 30 Jan 2019 13:31:32 +0100
From:   Thomas Gleixner <tglx@...utronix.de>
To:     LKML <linux-kernel@...r.kernel.org>
Cc:     Waiman Long <longman@...hat.com>,
        Matthew Wilcox <willy@...radead.org>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Alexey Dobriyan <adobriyan@...il.com>,
        Kees Cook <keescook@...omium.org>,
        linux-fsdevel@...r.kernel.org, Davidlohr Bueso <dave@...olabs.net>,
        Miklos Szeredi <miklos@...redi.hu>,
        Daniel Colascione <dancol@...gle.com>,
        Dave Chinner <david@...morbit.com>,
        Randy Dunlap <rdunlap@...radead.org>,
        Marc Zyngier <marc.zyngier@....com>
Subject: [patch 2/2] proc/stat: Make the interrupt statistics more efficient

Waiman reported that on large systems with a large amount of interrupts the
readout of /proc/stat takes a long time to sum up the interrupt
statistics. In principle this is not a problem. but for unknown reasons
some enterprise quality software reads /proc/stat with a high frequency.

The reason for this is that interrupt statistics are accounted per cpu. So
the /proc/stat logic has to sum up the interrupt stats for each interrupt.

The interrupt core provides now a per interrupt summary counter which can
be used to avoid the summation loops completely except for interrupts
marked PER_CPU which are only a small fraction of the interrupt space if at
all.

Another simplification is to iterate only over the active interrupts and
skip the potentially large gaps in the interrupt number space and just
print zeros for the gaps without going into the interrupt core in the first
place.

Reported-by: Waiman Long <longman@...hat.com>
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
---
 fs/proc/stat.c |   28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -79,6 +79,30 @@ static u64 get_iowait_time(int cpu)

 #endif

+static void show_irq_gap(struct seq_file *p, int gap)
+{
+	static const char zeros[] = " 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
+
+	while (gap > 0) {
+		int inc = min_t(int, gap, ARRAY_SIZE(zeros) / 2);
+
+		seq_write(p, zeros, 2 * inc);
+		gap -= inc;
+	}
+}
+
+static void show_all_irqs(struct seq_file *p)
+{
+	int i, next = 0;
+
+	for_each_active_irq(i) {
+		show_irq_gap(p, i - next);
+		seq_put_decimal_ull(p, " ", kstat_irqs_usr(i));
+		next = i + 1;
+	}
+	show_irq_gap(p, nr_irqs - next);
+}
+
 static int show_stat(struct seq_file *p, void *v)
 {
 	int i, j;
@@ -156,9 +180,7 @@ static int show_stat(struct seq_file *p,
 	}
 	seq_put_decimal_ull(p, "intr ", (unsigned long long)sum);

-	/* sum again ? it could be updated? */
-	for_each_irq_nr(j)
-		seq_put_decimal_ull(p, " ", kstat_irqs_usr(j));
+	show_all_irqs(p);

 	seq_printf(p,
 		"\nctxt %llu\n"