linux-kernel - RE: [PATCH V8 3/5] i2c: tegra: Add DMA Support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <BYAPR12MB3398D3DCD0DEACD67A58C75FC2910@BYAPR12MB3398.namprd12.prod.outlook.com>
Date:   Thu, 31 Jan 2019 21:46:48 +0000
From:   Sowjanya Komatineni <skomatineni@...dia.com>
To:     Dmitry Osipenko <digetx@...il.com>,
        "thierry.reding@...il.com" <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Mantravadi Karthik <mkarthik@...dia.com>,
        Shardar Mohammed <smohammed@...dia.com>,
        Timo Alho <talho@...dia.com>
CC:     "linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>
Subject: RE: [PATCH V8 3/5] i2c: tegra: Add DMA Support

> It works with this change:
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index fe5b89abc576..8e059e94b94e 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -1170,10 +1170,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
>                 time_left, completion_done(&i2c_dev->msg_complete),
>                 i2c_dev->msg_err);
>
> +       tegra_i2c_init(i2c_dev, true);
> +
>         if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
>                 return 0;
>  
> -       tegra_i2c_init(i2c_dev, true);
>         /* start recovery upon arbitration loss in single master mode */
>         if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
>                 if (!i2c_dev->is_multimaster_mode)
>
>
> Which means that HW state is kept dirty after DMA transfer. Please check everything carefully.

Identified issue, When I moved logic around for diff changes, INT enable isn’t correct for FIFO DATA REQ. Will have proper fix in next version.