[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190131073125.GM7262@kuha.fi.intel.com>
Date: Thu, 31 Jan 2019 09:31:25 +0200
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Kyle Tso <kyletso@...gle.com>
Cc: linux@...ck-us.net, gregkh@...uxfoundation.org, badhri@...gle.com,
Adam.Thomson.Opensource@...semi.com, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] usb: typec: tcpm: Correct the PPS out_volt calculation
On Wed, Jan 30, 2019 at 11:13:53AM +0800, Kyle Tso wrote:
> When Sink negotiates PPS, the voltage range of selected PPS APDO might
> not cover the previous voltage (out_volt). If the previous out_volt is
> lower than the new min_volt, the output voltage in RDO might be set to
> an invalid value. For instance, supposed that the previous voltage is
> 5V, and the new voltage range in the APDO is 7V-12V. Then the output
> voltage in the RDO should not be set to 5V which is lower than the
> possible min_volt 7V.
>
> Fix this by choosing the maximal value between the previous voltage and
> the new min_volt first. And ensure that this value will not exceed the
> new max_volt. The new out_volt will fall within the new voltage range
> while being the closest value compared to the previous out_volt.
>
> Signed-off-by: Kyle Tso <kyletso@...gle.com>
Fixes: c710d0bb76ff0 ("usb: typec: tcpm: Extend the matching rules on PPS APDO selection")
Cc: stable...
Right? In any case:
Reviewed-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
> ---
> drivers/usb/typec/tcpm/tcpm.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index f1d3e54210df..8f2af348bda5 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -2297,7 +2297,8 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port)
> pdo_pps_apdo_max_voltage(snk));
> port->pps_data.max_curr = min_pps_apdo_current(src, snk);
> port->pps_data.out_volt = min(port->pps_data.max_volt,
> - port->pps_data.out_volt);
> + max(port->pps_data.min_volt,
> + port->pps_data.out_volt));
> port->pps_data.op_curr = min(port->pps_data.max_curr,
> port->pps_data.op_curr);
> }
> --
> 2.20.1.495.gaa96b0ce6b-goog
thanks,
--
heikki
Powered by blists - more mailing lists