| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1548921464-28917-5-git-send-email-aisheng.dong@nxp.com>
Date: Thu, 31 Jan 2019 08:03:51 +0000
From: Aisheng Dong <aisheng.dong@....com>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
dl-linux-imx <linux-imx@....com>,
"l.stach@...gutronix.de" <l.stach@...gutronix.de>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"tglx@...utronix.de" <tglx@...utronix.de>,
Aisheng Dong <aisheng.dong@....com>,
Marc Zyngier <marc.zyngier@....com>
Subject: [PATCH V3 4/4] irq: imx: irqsteer: add multi output interrupts
support
One irqsteer channel can support up to 8 output interrupts.
Cc: Marc Zyngier <marc.zyngier@....com>
Cc: Lucas Stach <l.stach@...gutronix.de>
Cc: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@....com>
---
ChangeLog:
v2->v3:
* add error check for imx_irqsteer_get_hwirq_base
* use DIV_ROUND_UP
* merge 'hwirq +=32' into for loop
* common error path in probe to avoid replicating clk_disable_unprepare
v1->v2:
* calculate irq_count by fsl,num-irqs instead of parsing interrupts
property from devicetree to match the input interrupts and outputs
* improve output interrupt handler by searching only two registers
withint the same group
---
drivers/irqchip/irq-imx-irqsteer.c | 88 +++++++++++++++++++++++++++++---------
1 file changed, 68 insertions(+), 20 deletions(-)
diff --git a/drivers/irqchip/irq-imx-irqsteer.c b/drivers/irqchip/irq-imx-irqsteer.c
index 67ed862..d1098f4 100644
--- a/drivers/irqchip/irq-imx-irqsteer.c
+++ b/drivers/irqchip/irq-imx-irqsteer.c
@@ -10,6 +10,7 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/spinlock.h>
@@ -21,10 +22,13 @@
#define CHAN_MINTDIS(t) (CTRL_STRIDE_OFF(t, 3) + 0x4)
#define CHAN_MASTRSTAT(t) (CTRL_STRIDE_OFF(t, 3) + 0x8)
+#define CHAN_MAX_OUTPUT_INT 0x8
+
struct irqsteer_data {
void __iomem *regs;
struct clk *ipg_clk;
- int irq;
+ int irq[CHAN_MAX_OUTPUT_INT];
+ int irq_count;
raw_spinlock_t lock;
int reg_num;
int channel;
@@ -87,23 +91,47 @@ static const struct irq_domain_ops imx_irqsteer_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
+static int imx_irqsteer_get_hwirq_base(struct irqsteer_data *data, u32 irq)
+{
+ int i;
+
+ for (i = 0; i < data->irq_count; i++) {
+ if (data->irq[i] == irq)
+ return i * 64;
+ }
+
+ return -EINVAL;
+}
+
static void imx_irqsteer_irq_handler(struct irq_desc *desc)
{
struct irqsteer_data *data = irq_desc_get_handler_data(desc);
- int i;
+ int hwirq;
+ int irq, i;
chained_irq_enter(irq_desc_get_chip(desc), desc);
- for (i = 0; i < data->reg_num * 32; i += 32) {
- int idx = imx_irqsteer_get_reg_index(data, i);
+ irq = irq_desc_get_irq(desc);
+ hwirq = imx_irqsteer_get_hwirq_base(data, irq);
+ if (hwirq < 0) {
+ pr_warn("%s: unable to get hwirq base for irq %d\n",
+ __func__, irq);
+ return;
+ }
+
+ for (i = 0; i < 2; i++, hwirq += 32) {
+ int idx = imx_irqsteer_get_reg_index(data, hwirq);
unsigned long irqmap;
int pos, virq;
+ if (hwirq >= data->reg_num * 32)
+ break;
+
irqmap = readl_relaxed(data->regs +
CHANSTATUS(idx, data->reg_num));
for_each_set_bit(pos, &irqmap, 32) {
- virq = irq_find_mapping(data->domain, pos + i);
+ virq = irq_find_mapping(data->domain, pos + hwirq);
if (virq)
generic_handle_irq(virq);
}
@@ -117,7 +145,8 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct irqsteer_data *data;
struct resource *res;
- int ret;
+ u32 irqs_num;
+ int i, ret;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
@@ -130,12 +159,6 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
return PTR_ERR(data->regs);
}
- data->irq = platform_get_irq(pdev, 0);
- if (data->irq <= 0) {
- dev_err(&pdev->dev, "failed to get irq\n");
- return -ENODEV;
- }
-
data->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(data->ipg_clk)) {
ret = PTR_ERR(data->ipg_clk);
@@ -146,11 +169,15 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
raw_spin_lock_init(&data->lock);
- of_property_read_u32(np, "fsl,num-irqs", &data->reg_num);
+ of_property_read_u32(np, "fsl,num-irqs", &irqs_num);
of_property_read_u32(np, "fsl,channel", &data->channel);
- /* one register bit map represents 32 input interrupts */
- data->reg_num /= 32;
+ /*
+ * There is one output irq for each group of 64 inputs.
+ * One register bit map can represent 32 input interrupts.
+ */
+ data->irq_count = DIV_ROUND_UP(irqs_num, 64);
+ data->reg_num = irqs_num / 32;
if (IS_ENABLED(CONFIG_PM_SLEEP)) {
data->saved_reg = devm_kzalloc(&pdev->dev,
@@ -173,23 +200,44 @@ static int imx_irqsteer_probe(struct platform_device *pdev)
&imx_irqsteer_domain_ops, data);
if (!data->domain) {
dev_err(&pdev->dev, "failed to create IRQ domain\n");
- clk_disable_unprepare(data->ipg_clk);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out;
}
- irq_set_chained_handler_and_data(data->irq, imx_irqsteer_irq_handler,
- data);
+ if (!data->irq_count || data->irq_count > CHAN_MAX_OUTPUT_INT) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ for (i = 0; i < data->irq_count; i++) {
+ data->irq[i] = irq_of_parse_and_map(np, i);
+ if (!data->irq[i]) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ irq_set_chained_handler_and_data(data->irq[i],
+ imx_irqsteer_irq_handler,
+ data);
+ }
platform_set_drvdata(pdev, data);
return 0;
+out:
+ clk_disable_unprepare(data->ipg_clk);
+ return ret;
}
static int imx_irqsteer_remove(struct platform_device *pdev)
{
struct irqsteer_data *irqsteer_data = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < irqsteer_data->irq_count; i++)
+ irq_set_chained_handler_and_data(irqsteer_data->irq[i],
+ NULL, NULL);
- irq_set_chained_handler_and_data(irqsteer_data->irq, NULL, NULL);
irq_domain_remove(irqsteer_data->domain);
clk_disable_unprepare(irqsteer_data->ipg_clk);
--
2.7.4
Powered by blists - more mailing lists