| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190131134821.00007dd0@huawei.com>
Date: Thu, 31 Jan 2019 13:48:21 +0000
From: Jonathan Cameron <jonathan.cameron@...wei.com>
To: Ricardo Ribalda Delgado <ricardo@...alda.com>
CC: Jonathan Cameron <jic23@...nel.org>, <linux-iio@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 1/2] iio:dac:ti-dac7612: Add driver for Texas
Instruments DAC7612
On Mon, 28 Jan 2019 10:49:30 +0100
Ricardo Ribalda Delgado <ricardo@...alda.com> wrote:
> It is a driver for Texas Instruments Dual, 12-Bit Serial Input
> Digital-to-Analog Converter.
>
> Datasheet of this chip:
> http://www.ti.com/lit/ds/sbas106/sbas106.pdf
>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo@...alda.com>
Hi Ricardo,
Trivial bits inline I would have fixed, but seems we will be going for a v4
for the binding anyway!
Jonathan
> ---
> v3: Changes by Jonathan Cameron <jic23@...nel.org>
>
> - Include OF compatible strings
> - Rename RESOLUTION define
> - Create defines for BIT positions
> - Support DMA
> - Rename gpio
> - Remove scantype
> - Fix scale
> - Use iio_priv at variable definition
> - (Ab)use ARRAY_SIZE for number of channels (love the idea)
>
>
> MAINTAINERS | 6 ++
> drivers/iio/dac/Kconfig | 10 ++
> drivers/iio/dac/Makefile | 1 +
> drivers/iio/dac/ti-dac7612.c | 173 +++++++++++++++++++++++++++++++++++
> 4 files changed, 190 insertions(+)
> create mode 100644 drivers/iio/dac/ti-dac7612.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d039f66a5cef..30ba5435906b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14877,6 +14877,12 @@ F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
> F: drivers/clk/keystone/sci-clk.c
> F: drivers/reset/reset-ti-sci.c
>
> +Texas Instruments' DAC7612 DAC Driver
> +M: Ricardo Ribalda <ricardo@...alda.com>
> +L: linux-iio@...r.kernel.org
> +S: Supported
> +F: drivers/iio/dac/ti-dac7612.c
> +
> THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
> M: Hans Verkuil <hverkuil@...all.nl>
> L: linux-media@...r.kernel.org
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index f28daf67db6a..fbef9107acad 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -375,6 +375,16 @@ config TI_DAC7311
>
> If compiled as a module, it will be called ti-dac7311.
>
> +config TI_DAC7612
> + tristate "Texas Instruments 12-bit 2-channel DAC driver"
> + depends on SPI_MASTER && GPIOLIB
> + help
> + Driver for the Texas Instruments DAC7612, DAC7612U, DAC7612UB
> + The driver hand drive the load pin automatically, otherwise
> + it needs to be toggled manually.
> +
> + If compiled as a module, it will be called ti-dac7612.
> +
> config VF610_DAC
> tristate "Vybrid vf610 DAC driver"
> depends on OF
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index f0a37c93de8e..1369fa1d2f0e 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -41,4 +41,5 @@ obj-$(CONFIG_STM32_DAC) += stm32-dac.o
> obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o
> obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o
> obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o
> +obj-$(CONFIG_TI_DAC7612) += ti-dac7612.o
> obj-$(CONFIG_VF610_DAC) += vf610_dac.o
> diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c
> new file mode 100644
> index 000000000000..a2f58256a784
> --- /dev/null
> +++ b/drivers/iio/dac/ti-dac7612.c
> @@ -0,0 +1,173 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * DAC7612 Dual, 12-Bit Serial input Digital-to-Analog Converter
> + *
> + * Copyright 2019 Qtechnology A/S
> + * 2019 Ricardo Ribalda <ricardo@...alda.com>
> + *
> + * Licensed under the GPL-2.
> + */
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/iio.h>
> +
> +#define DAC7612_RESOLUTION 12
> +#define DAC7612_ADDRESS 4
> +#define DAC7612_START 5
> +
> +struct dac7612 {
> + struct spi_device *spi;
> + struct gpio_desc *loaddacs;
> + uint16_t cache[2];
> +
> + // DMA
/* DMA */
But a slightly more detailed comment preferred.
> + uint8_t data[2] ____cacheline_aligned;
> +};
> +
> +static int dac7612_cmd_single(struct dac7612 *priv, int channel, u16 val)
> +{
> + int ret;
> +
> + priv->data[0] = BIT(DAC7612_START) | (channel << DAC7612_ADDRESS);
> + priv->data[0] |= val >> 8;
> + priv->data[1] = val & 0xff;
> +
> + priv->cache[channel] = val;
> +
> + ret = spi_write(priv->spi, priv->data, sizeof(priv->data));
> + if (ret)
> + return ret;
> +
> + gpiod_set_value(priv->loaddacs, 1);
> + gpiod_set_value(priv->loaddacs, 0);
> +
> + return 0;
> +}
> +
> +#define dac7612_CHANNEL(chan, name) { \
> + .type = IIO_VOLTAGE, \
> + .channel = (chan), \
> + .indexed = 1, \
> + .output = 1, \
> + .datasheet_name = name, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> +}
> +
> +static const struct iio_chan_spec dac7612_channels[] = {
> + dac7612_CHANNEL(0, "OUTA"),
> + dac7612_CHANNEL(1, "OUTB"),
> +};
> +
> +static int dac7612_read_raw(struct iio_dev *iio_dev,
> + const struct iio_chan_spec *chan,
> + int *val, int *val2, long mask)
> +{
> + struct dac7612 *priv;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + priv = iio_priv(iio_dev);
> + *val = priv->cache[chan->channel];
> + return IIO_VAL_INT;
> +
> + case IIO_CHAN_INFO_SCALE:
> + *val = 1;
> + return IIO_VAL_INT;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int dac7612_write_raw(struct iio_dev *iio_dev,
> + const struct iio_chan_spec *chan,
> + int val, int val2, long mask)
> +{
> + struct dac7612 *priv = iio_priv(iio_dev);
> + int ret;
> +
> + if (mask != IIO_CHAN_INFO_RAW)
> + return -EINVAL;
> +
> + if ((val >= BIT(DAC7612_RESOLUTION)) || val < 0 || val2)
> + return -EINVAL;
> +
> + if (val == priv->cache[chan->channel])
> + return 0;
> +
> + mutex_lock(&iio_dev->mlock);
> + ret = dac7612_cmd_single(priv, chan->channel, val);
> + mutex_unlock(&iio_dev->mlock);
> +
> + return ret;
> +}
> +
> +static const struct iio_info dac7612_info = {
> + .read_raw = dac7612_read_raw,
> + .write_raw = dac7612_write_raw,
> +};
> +
> +static int dac7612_probe(struct spi_device *spi)
> +{
> + struct iio_dev *iio_dev;
> + struct dac7612 *priv;
> + int i;
> + int ret;
> +
> + iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*priv));
> + if (!iio_dev)
> + return -ENOMEM;
> +
> + priv = iio_priv(iio_dev);
Please add a comment here about why it's optional but we then use
it anyway (which is fine but none obvious!)
> + priv->loaddacs = devm_gpiod_get_optional(&spi->dev, "loaddacs",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(priv->loaddacs))
> + return PTR_ERR(priv->loaddacs);
> + priv->spi = spi;
> + spi_set_drvdata(spi, iio_dev);
> + iio_dev->dev.parent = &spi->dev;
> + iio_dev->info = &dac7612_info;
> + iio_dev->modes = INDIO_DIRECT_MODE;
> + iio_dev->channels = dac7612_channels;
> + iio_dev->num_channels = ARRAY_SIZE(priv->cache);
> + iio_dev->name = spi_get_device_id(spi)->name;
> +
> + for (i = 0; i < ARRAY_SIZE(priv->cache); i++) {
> + ret = dac7612_cmd_single(priv, i, 0);
> + if (ret)
> + return ret;
> + }
> +
> + return devm_iio_device_register(&spi->dev, iio_dev);
> +}
> +
> +static const struct spi_device_id dac7612_id[] = {
> + {"ti-dac7612"},
> + {}
> +};
> +MODULE_DEVICE_TABLE(spi, dac7612_id);
> +
> +static const struct of_device_id dac7612_of_match[] = {
> + { .compatible = "ti,dac7612" },
> + { .compatible = "ti,dac7612u" },
> + { .compatible = "ti,dac7612b" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, dac7612_of_match);
> +
> +static struct spi_driver dac7612_driver = {
> + .driver = {
> + .name = "ti-dac7612",
> + .of_match_table = dac7612_of_match,
> + },
> + .probe = dac7612_probe,
> + .id_table = dac7612_id,
> +};
> +module_spi_driver(dac7612_driver);
> +
> +MODULE_AUTHOR("Ricardo Ribalda <ricardo@...alda.com>");
> +MODULE_DESCRIPTION("Texas Instruments DAC7612 DAC driver");
> +MODULE_LICENSE("GPL v2");
Powered by blists - more mailing lists