linux-kernel - Re: Getting weird TPM error after rebasing my tree to security/next-general

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190131160437.GA5629@linux.intel.com>
Date:   Thu, 31 Jan 2019 18:04:37 +0200
From:   Jarkko Sakkinen <jarkko.sakkinen@...ux.intel.com>
To:     Linus Torvalds <torvalds@...ux-foundation.org>
Cc:     Jason Gunthorpe <jgg@...pe.ca>,
        James Bottomley <James.Bottomley@...senpartnership.com>,
        linux-integrity@...r.kernel.org,
        linux-security-module@...r.kernel.org,
        Linux List Kernel Mailing <linux-kernel@...r.kernel.org>,
        tomas.winkler@...el.com
Subject: Re: Getting weird TPM error after rebasing my tree to
 security/next-general

On Thu, Jan 31, 2019 at 02:26:06PM +0200, Jarkko Sakkinen wrote:
> On Tue, Jan 29, 2019 at 03:20:16PM +0200, Jarkko Sakkinen wrote:
> > On Thu, Jan 24, 2019 at 07:43:30AM +1300, Linus Torvalds wrote:
> > > On Thu, Jan 24, 2019 at 4:36 AM Jarkko Sakkinen
> > > <jarkko.sakkinen@...ux.intel.com> wrote:
> > > > >
> > > > > Is it just that this particular hardware always happened to trigger
> > > > > the ERMS case (ie "rep movsb")?
> > > >
> > > > This is the particular snippet in question:
> > > >
> > > > memcpy_fromio(buf, priv->rsp, 6);
> > > > expected = be32_to_cpup((__be32 *) &buf[2]);
> > > > if (expected > count || expected < 6)
> > > >         return -EIO;
> > > 
> > > Ok, strange.
> > > 
> > > So what *used* to happen is that the memcpy_fromio() would just expand
> > > as a "memcpy()", and in this case, gcc would then inline the memcpy().
> > > In fact, gcc does it as a 4-byte access and a two-byte access from
> > > what I can tell.
> > 
> > I verified, and it is exactly as you stated:
> > 
> >    0xffffffff814aaa33 <+51>:	mov    (%rax),%edx
> >    0xffffffff814aaa35 <+53>:	mov    %edx,0x0(%rbp)
> >    0xffffffff814aaa38 <+56>:	movzwl 0x4(%rax),%eax
> >    0xffffffff814aaa3c <+60>:	mov    %ax,0x4(%rbp)
> > 
> > And your new version does exactly the same thing to the first six bytes
> > (with different opcode, but the same memory access pattern).
> 
> I think I have found the root cause:
> 
> memcpy_fromio(&__rsp_pa, &priv->regs_t->ctrl_rsp_pa, 8);
> 
> This is from crb_map_io(). This should be read as quad word.
> 
> I'll change it to ioread64() and see what happens. I don't know why it
> even has used memcpy_fromio() in the first place. I guess, when I first
> implemented the driver, I used that for no logical reason, and it has
> worked since up until now.

No, cannot be it. If you couldn't read it in two dwords, then it would
have been always broken with 32-bit build.

Anyway, just in case, I will check what address it prints out.

/Jarkko