linux-kernel - Re: [PATCH 2/2] hwmon: pwm-fan: Add optional regulator support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190131175651.GA16231@roeck-us.net>
Date:   Thu, 31 Jan 2019 09:56:52 -0800
From:   Guenter Roeck <linux@...ck-us.net>
To:     Stefan Wahren <stefan.wahren@...e.com>
Cc:     Kamil Debski <kamil@...as.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Jean Delvare <jdelvare@...e.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] hwmon: pwm-fan: Add optional regulator support

On Tue, Jan 29, 2019 at 06:07:11PM +0100, Stefan Wahren wrote:
> This adds optional regulator support to the pwm-fan driver. This is
> necessary for pwm fans which are powered by a switchable supply.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
> ---
>  drivers/hwmon/pwm-fan.c | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
> index 2c94482..9e0591e 100644
> --- a/drivers/hwmon/pwm-fan.c
> +++ b/drivers/hwmon/pwm-fan.c
> @@ -23,6 +23,7 @@
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/pwm.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/sysfs.h>
>  #include <linux/thermal.h>
>  
> @@ -31,6 +32,7 @@
>  struct pwm_fan_ctx {
>  	struct mutex lock;
>  	struct pwm_device *pwm;
> +	struct regulator *reg_en;
>  	unsigned int pwm_value;
>  	unsigned int pwm_fan_state;
>  	unsigned int pwm_fan_max_state;
> @@ -244,6 +246,23 @@ static int pwm_fan_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	ctx->reg_en = devm_regulator_get_optional(&pdev->dev, "fan");
> +	if (!IS_ERR(ctx->reg_en)) {

It is customary to handle the error case first.

> +		ret = regulator_enable(ctx->reg_en);
> +		if (ret)
> +			dev_err(&pdev->dev,
> +				"Failed to enable fan supply: %d\n", ret);
> +	} else {
> +		switch (PTR_ERR(ctx->reg_en)) {
> +		case -ENODEV:
> +		case -ENOSYS:

Does devm_regulator_get_optional() ever return -ENOSYS ?
I glanced through other calls to devm_regulator_get_optional(),
but I don't see that check anywhere.

> +			ctx->reg_en = NULL;
> +			break;
> +		default:
> +			return PTR_ERR(ctx->reg_en);
> +		}

This is inconsistent. Provided regulators which fail to enable are
accepted, albeit with an error message, while unexpected errors from
devm_regulator_get_optional() result in a bailout. Please be consistent.

> +	}
> +
>  	hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "pwmfan",
>  						       ctx, pwm_fan_groups);
>  	if (IS_ERR(hwmon)) {
> @@ -287,6 +306,10 @@ static int pwm_fan_remove(struct platform_device *pdev)
>  	thermal_cooling_device_unregister(ctx->cdev);
>  	if (ctx->pwm_value)
>  		pwm_disable(ctx->pwm);
> +
> +	if (ctx->reg_en)
> +		regulator_disable(ctx->reg_en);

As written, this is also called after regulator_enable() failed.
Same below.

> +
>  	return 0;
>  }
>  
> @@ -299,6 +322,12 @@ static int pwm_fan_suspend(struct device *dev)
>  
>  	pwm_get_args(ctx->pwm, &args);
>  
> +	if (ctx->reg_en) {
> +		ret = regulator_disable(ctx->reg_en);
> +		if (ret)
> +			dev_err(dev, "Failed to disable fan supply: %d\n", ret);
> +	}
> +
>  	if (ctx->pwm_value) {
>  		ret = pwm_config(ctx->pwm, 0, args.period);
>  		if (ret < 0)
> @@ -317,6 +346,12 @@ static int pwm_fan_resume(struct device *dev)
>  	unsigned long duty;
>  	int ret;
>  
> +	if (ctx->reg_en) {
> +		ret = regulator_enable(ctx->reg_en);
> +		if (ret)
> +			dev_err(dev, "Failed to enable fan supply: %d\n", ret);
> +	}
> +
>  	if (ctx->pwm_value == 0)
>  		return 0;
>