linux-kernel - Re: [v5 2/2] arm64: dts: lx2160a: add sata node support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190201063011.GL19882@dragon>
Date:   Fri, 1 Feb 2019 14:30:12 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Peng Ma <peng.ma@....com>
Cc:     axboe@...nel.dk, robh+dt@...nel.org, mark.rutland@....com,
        leoyang.li@....com, linux-ide@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, andy.tang@....com
Subject: Re: [v5 2/2] arm64: dts: lx2160a: add sata node support

On Fri, Jan 25, 2019 at 08:10:13AM +0000, Peng Ma wrote:
> Add SATA device nodes for fsl-lx2160a and enable support
> for QDS and RDB boards.
> 
> Signed-off-by: Peng Ma <peng.ma@....com>
> ---
> changed for V5:
> 	- no change
> 
>  arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts |   16 +++++++
>  arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts |   16 +++++++
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    |   44 +++++++++++++++++++++
>  3 files changed, 76 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 99a22ab..1a5acf6 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -95,6 +95,22 @@
>  	};
>  };
>  
> +&sata0 {
> +	status = "okay";
> +};
> +
> +&sata1 {
> +	status = "okay";
> +};
> +
> +&sata2 {
> +	status = "okay";
> +};
> +
> +&sata3 {
> +	status = "okay";
> +};
> +
>  &uart0 {
>  	status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> index 6481e5f..5b6799e 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> @@ -102,6 +102,22 @@
>  	};
>  };
>  
> +&sata0 {
> +	status = "okay";
> +};
> +
> +&sata1 {
> +	status = "okay";
> +};
> +
> +&sata2 {
> +	status = "okay";
> +};
> +
> +&sata3 {
> +	status = "okay";
> +};
> +
>  &uart0 {
>  	status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index a79f5c1..592034b 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -671,6 +671,50 @@
>  			status = "disabled";
>  		};
>  
> +		sata0: sata@...0000 {
> +			compatible = "fsl,lx2160a-ahci";

Has the kernel driver been patched to probe the compatible?

Shawn

> +			reg = <0x0 0x3200000 0x0 0x10000>,
> +			      <0x7 0x100520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";
> +			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 3>;
> +			dma-coherent;
> +			status = "disabled";
> +		};
> +
> +		sata1: sata@...0000 {
> +			compatible = "fsl,lx2160a-ahci";
> +			reg = <0x0 0x3210000 0x0 0x10000>,
> +			      <0x7 0x100520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";
> +			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 3>;
> +			dma-coherent;
> +			status = "disabled";
> +		};
> +
> +		sata2: sata@...0000 {
> +			compatible = "fsl,lx2160a-ahci";
> +			reg = <0x0 0x3220000 0x0 0x10000>,
> +			      <0x7 0x100520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";
> +			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 3>;
> +			dma-coherent;
> +			status = "disabled";
> +		};
> +
> +		sata3: sata@...0000 {
> +			compatible = "fsl,lx2160a-ahci";
> +			reg = <0x0 0x3230000 0x0 0x10000>,
> +			      <0x7 0x100520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";
> +			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 3>;
> +			dma-coherent;
> +			status = "disabled";
> +		};
> +
>  		smmu: iommu@...0000 {
>  			compatible = "arm,mmu-500";
>  			reg = <0 0x5000000 0 0x800000>;
> -- 
> 1.7.1
>