linux-kernel - Re: [PATCH] mlx4_ib: Increase the timeout for CM cache

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 1 Feb 2019 16:18:34 +0100
From:   Håkon Bugge <haakon.bugge@...cle.com>
To:     Doug Ledford <dledford@...hat.com>,
        Sean Hefty <sean.hefty@...el.com>,
        Hal Rosenstock <hal@....mellanox.co.il>
Cc:     OFED mailing list <linux-rdma@...r.kernel.org>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] mlx4_ib: Increase the timeout for CM cache

Sorry,

I posted this as if it a net patch. It isn't, hence resend with correct recipients.



Thxs, Håkon


> On 31 Jan 2019, at 18:09, Håkon Bugge <haakon.bugge@...cle.com> wrote:
> 
> Using CX-3 virtual functions, either from a bare-metal machine or
> pass-through from a VM, MAD packets are proxied through the PF driver.
> 
> Since the VMs have separate name spaces for MAD Transaction Ids
> (TIDs), the PF driver has to re-map the TIDs and keep the book keeping
> in a cache.
> 
> Following the RDMA CM protocol, it is clear when an entry has to
> evicted form the cache. But life is not perfect, remote peers may die
> or be rebooted. Hence, it's a timeout to wipe out a cache entry, when
> the PF driver assumes the remote peer has gone.
> 
> We have experienced excessive amount of DREQ retries during fail-over
> testing, when running with eight VMs per database server.
> 
> The problem has been reproduced in a bare-metal system using one VM
> per physical node. In this environment, running 256 processes in each
> VM, each process uses RDMA CM to create an RC QP between himself and
> all (256) remote processes. All in all 16K QPs.
> 
> When tearing down these 16K QPs, excessive DREQ retries (and
> duplicates) are observed. With some cat/paste/awk wizardry on the
> infiniband_cm sysfs, we observe:
> 
>      dreq:       5007
> cm_rx_msgs:
>      drep:       3838
>      dreq:      13018
>       rep:       8128
>       req:       8256
>       rtu:       8256
> cm_tx_msgs:
>      drep:       8011
>      dreq:      68856
>       rep:       8256
>       req:       8128
>       rtu:       8128
> cm_tx_retries:
>      dreq:      60483
> 
> Note that the active/passive side is distributed.
> 
> Enabling pr_debug in cm.c gives tons of:
> 
> [171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave:
> 1,sl_cm_id: 0xd393089f} is NULL!
> 
> By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the
> tear-down phase of the application is reduced from 113 to 67
> seconds. Retries/duplicates are also significantly reduced:
> 
> cm_rx_duplicates:
>      dreq:       7726
> []
> cm_tx_retries:
>      drep:          1
>      dreq:       7779
> 
> Increasing the timeout further didn't help, as these duplicates and
> retries stem from a too short CMA timeout, which was 20 (~4 seconds)
> on the systems. By increasing the CMA timeout to 22 (~17 seconds), the
> numbers fell down to about one hundred for both of them.
> 
> Adjustment of the CMA timeout is _not_ part of this commit.
> 
> Signed-off-by: Håkon Bugge <haakon.bugge@...cle.com>
> ---
> drivers/infiniband/hw/mlx4/cm.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
> index fedaf8260105..8c79a480f2b7 100644
> --- a/drivers/infiniband/hw/mlx4/cm.c
> +++ b/drivers/infiniband/hw/mlx4/cm.c
> @@ -39,7 +39,7 @@
> 
> #include "mlx4_ib.h"
> 
> -#define CM_CLEANUP_CACHE_TIMEOUT  (5 * HZ)
> +#define CM_CLEANUP_CACHE_TIMEOUT  (30 * HZ)
> 
> struct id_map_entry {
> 	struct rb_node node;
> -- 
> 2.20.1
>