[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190201154232.10505-9-jagan@amarulasolutions.com>
Date: Fri, 1 Feb 2019 21:12:17 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Maxime Ripard <maxime.ripard@...tlin.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>, Chen-Yu Tsai <wens@...e.org>,
Michael Turquette <mturquette@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org,
Michael Trimarchi <michael@...rulasolutions.com>,
linux-amarula@...rulasolutions.com, linux-sunxi@...glegroups.com,
Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH v7 08/23] drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls
The burst mode panels with 4-lane would require to enable trail bits
in DSI basic control register.
So, enable 2byte trail and trail_env for 4-lane burst mode devices.
Allwinner A64 BSP should also relie on same setup for enabling trail
bit in DSI controller.
Reference code avialable in BSP (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
if (panel->lcd_dsi_lane == 4)
{
dsi_dev[sel]->dsi_basic_ctl.bits.trail_inv = 0xc;
dsi_dev[sel]->dsi_basic_ctl.bits.trail_fill = 1;
}
Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
Tested-by: Merlijn Wajer <merlijn@...zup.org>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 46ad142e66e8..a2ad9fa7f8d5 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -33,6 +33,8 @@
#define SUN6I_DSI_CTL_EN BIT(0)
#define SUN6I_DSI_BASIC_CTL_REG 0x00c
+#define SUN6I_DSI_BASIC_CTL_TRAIL_INV(n) (((n) & 0xf) << 4)
+#define SUN6I_DSI_BASIC_CTL_TRAIL_FILL BIT(3)
#define SUN6I_DSI_BASIC_CTL_HBP_DIS BIT(2)
#define SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS BIT(1)
#define SUN6I_DSI_BASIC_CTL_VIDEO_BURST BIT(0)
@@ -464,6 +466,10 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
/* enable burst mode */
regmap_read(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, &val);
val |= SUN6I_DSI_BASIC_CTL_VIDEO_BURST;
+ if (device->lanes == 4) {
+ val |= SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc);
+ val |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL;
+ }
regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, val);
}
--
2.18.0.321.gffc6fa0e3
Powered by blists - more mailing lists