[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190201215759.14569-4-tduszyns@gmail.com>
Date: Fri, 1 Feb 2019 22:57:59 +0100
From: Tomasz Duszynski <tduszyns@...il.com>
To: linux-iio@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
robh+dt@...nel.org, jic23@...23.retrosnub.co.uk, pmeerw@...erw.net,
johan@...nel.org, Tomasz Duszynski <tduszyns@...il.com>
Subject: [PATCH v3 3/3] dt-bindings: iio: chemical: pms7003: add device tree support
Add device tree support for Plantower PMS7003 particulate matter sensor.
Signed-off-by: Tomasz Duszynski <tduszyns@...il.com>
---
.../iio/chemical/plantower,pms7003.txt | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
new file mode 100644
index 000000000000..cbad95480e04
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
@@ -0,0 +1,20 @@
+* Plantower PMS7003 particulate matter sensor
+
+Required properties:
+- compatible: must be "plantower,pms7003"
+- vcc-supply: phandle to the regulator that provides power to the sensor
+
+Optional properties:
+- set-gpios: phandle to the GPIO connected to the SET line
+- reset-gpios: phandle to the GPIO connected to the RESET line
+
+Refer to serial/slave-device.txt for generic serial attached device bindings.
+
+Example:
+
+&uart0 {
+ air-pollution-sensor {
+ vcc-supply = <®_vcc5v0>;
+ compatible = "plantower,pms7003";
+ };
+};
--
2.20.1
Powered by blists - more mailing lists