| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 3 Feb 2019 15:49:49 +0200
From: Oded Gabbay <oded.gabbay@...il.com>
To: Mike Rapoport <rppt@...ux.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Linux-Kernel@...r. Kernel. Org" <linux-kernel@...r.kernel.org>,
Olof Johansson <olof@...om.net>, ogabbay@...ana.ai,
Arnd Bergmann <arnd@...db.de>, Joe Perches <joe@...ches.com>
Subject: Re: [PATCH v2 07/15] habanalabs: add h/w queues module
On Thu, Jan 31, 2019 at 3:32 PM Mike Rapoport <rppt@...ux.ibm.com> wrote:
>
> On Thu, Jan 31, 2019 at 12:06:09AM +0200, Oded Gabbay wrote:
> > This patch adds the H/W queues module and the code to initialize Goya's
> > various compute and DMA engines and their queues.
> >
> > Goya has 5 DMA channels, 8 TPC engines and a single MME engine. For each
> > channel/engine, there is a H/W queue logic which is used to pass commands
> > from the user to the H/W. That logic is called QMAN.
> >
> > There are two types of QMANs: external and internal. The DMA QMANs are
> > considered external while the TPC and MME QMANs are considered internal.
> > For each external queue there is a completion queue, which is located on
> > the Host memory.
> >
> > The differences between external and internal QMANs are:
> >
> > 1. The location of the queue's memory. External QMANs are located on the
> > Host memory while internal QMANs are located on the on-chip memory.
> >
> > 2. The external QMAN write an entry to a completion queue and sends an
> > MSI-X interrupt upon completion of a command buffer that was given to
> > it. The internal QMAN doesn't do that.
> >
> > Signed-off-by: Oded Gabbay <oded.gabbay@...il.com>
> > ---
> > Changes in v2:
> > - Add goya_async_events.h in this patch
> > - Add return of -ENOMEM in error path (was originally missing)
> > - Replace /** with /* in all functions
> > - Add comment about stopping QMANs
> > - Better error message for failure in sending CPU packet
> > - Remove Authors: from comment at start of file
> > - Remove bitfields in interface to F/W and use __le16/32/64
> > - Remove bitfields in interface to QMAN and use __le16/32/64
> > - Move enum goya_queue_id to uapi/misc/habanalabs.h as it is uapi
> >
> > drivers/misc/habanalabs/Makefile | 2 +-
> > drivers/misc/habanalabs/device.c | 75 +-
> > drivers/misc/habanalabs/goya/goya.c | 1529 +++++++++++++++--
> > drivers/misc/habanalabs/goya/goyaP.h | 7 +
> > drivers/misc/habanalabs/habanalabs.h | 175 +-
> > drivers/misc/habanalabs/habanalabs_drv.c | 6 +
> > drivers/misc/habanalabs/hw_queue.c | 404 +++++
> > drivers/misc/habanalabs/include/armcp_if.h | 292 ++++
> > .../include/goya/goya_async_events.h | 186 ++
> > .../habanalabs/include/goya/goya_packets.h | 129 ++
> > drivers/misc/habanalabs/include/qman_if.h | 56 +
> > drivers/misc/habanalabs/irq.c | 150 ++
> > include/uapi/misc/habanalabs.h | 29 +
> > 13 files changed, 2919 insertions(+), 121 deletions(-)
> > create mode 100644 drivers/misc/habanalabs/hw_queue.c
> > create mode 100644 drivers/misc/habanalabs/include/goya/goya_async_events.h
> > create mode 100644 drivers/misc/habanalabs/include/goya/goya_packets.h
> > create mode 100644 drivers/misc/habanalabs/include/qman_if.h
> > create mode 100644 drivers/misc/habanalabs/irq.c
>
> [ ... ]
>
> > +/*
> > + * goya_stop_external_queues - Stop external queues
> > + *
> > + * @hdev: pointer to hl_device structure
> > + *
> > + * Returns 0 on success
> > + *
> > + */
> > +static int goya_stop_external_queues(struct hl_device *hdev)
> > +{
> > + int rc = goya_stop_queue(hdev,
> > + mmDMA_QM_0_GLBL_CFG1,
> > + mmDMA_QM_0_CP_STS,
> > + mmDMA_QM_0_GLBL_STS0);
> > +
> > + if (rc)
> > + dev_err(hdev->dev, "failed to stop DMA QMAN 0\n");
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmDMA_QM_1_GLBL_CFG1,
> > + mmDMA_QM_1_CP_STS,
> > + mmDMA_QM_1_GLBL_STS0);
> > +
> > + if (rc)
> > + dev_err(hdev->dev, "failed to stop DMA QMAN 1\n");
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmDMA_QM_2_GLBL_CFG1,
> > + mmDMA_QM_2_CP_STS,
> > + mmDMA_QM_2_GLBL_STS0);
> > +
> > + if (rc)
> > + dev_err(hdev->dev, "failed to stop DMA QMAN 2\n");
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmDMA_QM_3_GLBL_CFG1,
> > + mmDMA_QM_3_CP_STS,
> > + mmDMA_QM_3_GLBL_STS0);
> > +
> > + if (rc)
> > + dev_err(hdev->dev, "failed to stop DMA QMAN 3\n");
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmDMA_QM_4_GLBL_CFG1,
> > + mmDMA_QM_4_CP_STS,
> > + mmDMA_QM_4_GLBL_STS0);
> > +
> > + if (rc)
> > + dev_err(hdev->dev, "failed to stop DMA QMAN 4\n");
> > +
> > + return rc;
>
> Is is possible that one of the first goya_stop_queue() calls will fail, but
> the last would succeed? Then rc will be 0...
>
Thanks, fixed.
> BTW, the goya_stop_internal_queues() seem to handle this.
>
> > +}
> > +
> > +static void goya_resume_external_queues(struct hl_device *hdev)
> > +{
> > + WREG32(mmDMA_QM_0_GLBL_CFG1, 0);
> > + WREG32(mmDMA_QM_1_GLBL_CFG1, 0);
> > + WREG32(mmDMA_QM_2_GLBL_CFG1, 0);
> > + WREG32(mmDMA_QM_3_GLBL_CFG1, 0);
> > + WREG32(mmDMA_QM_4_GLBL_CFG1, 0);
> > +}
>
> [ ... ]
>
> > +/*
> > + * goya_stop_internal_queues - Stop internal queues
> > + *
> > + * @hdev: pointer to hl_device structure
> > + *
> > + * Returns 0 on success
> > + *
> > + */
> > +static int goya_stop_internal_queues(struct hl_device *hdev)
> > +{
> > + int rc, retval = 0;
> > +
> > + /*
> > + * Each queue (QMAN) is a separate H/W logic. That means that each
> > + * QMAN can be stopped independently and failure to stop one does NOT
> > + * mandate we should not try to stop other QMANs
> > + */
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmMME_QM_GLBL_CFG1,
> > + mmMME_QM_CP_STS,
> > + mmMME_QM_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop MME QMAN\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmMME_CMDQ_GLBL_CFG1,
> > + mmMME_CMDQ_CP_STS,
> > + mmMME_CMDQ_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop MME CMDQ\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC0_QM_GLBL_CFG1,
> > + mmTPC0_QM_CP_STS,
> > + mmTPC0_QM_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 0 QMAN\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC0_CMDQ_GLBL_CFG1,
> > + mmTPC0_CMDQ_CP_STS,
> > + mmTPC0_CMDQ_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 0 CMDQ\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC1_QM_GLBL_CFG1,
> > + mmTPC1_QM_CP_STS,
> > + mmTPC1_QM_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 1 QMAN\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC1_CMDQ_GLBL_CFG1,
> > + mmTPC1_CMDQ_CP_STS,
> > + mmTPC1_CMDQ_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 1 CMDQ\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC2_QM_GLBL_CFG1,
> > + mmTPC2_QM_CP_STS,
> > + mmTPC2_QM_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 2 QMAN\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC2_CMDQ_GLBL_CFG1,
> > + mmTPC2_CMDQ_CP_STS,
> > + mmTPC2_CMDQ_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 2 CMDQ\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC3_QM_GLBL_CFG1,
> > + mmTPC3_QM_CP_STS,
> > + mmTPC3_QM_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 3 QMAN\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC3_CMDQ_GLBL_CFG1,
> > + mmTPC3_CMDQ_CP_STS,
> > + mmTPC3_CMDQ_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 3 CMDQ\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC4_QM_GLBL_CFG1,
> > + mmTPC4_QM_CP_STS,
> > + mmTPC4_QM_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 4 QMAN\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC4_CMDQ_GLBL_CFG1,
> > + mmTPC4_CMDQ_CP_STS,
> > + mmTPC4_CMDQ_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 4 CMDQ\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC5_QM_GLBL_CFG1,
> > + mmTPC5_QM_CP_STS,
> > + mmTPC5_QM_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 5 QMAN\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC5_CMDQ_GLBL_CFG1,
> > + mmTPC5_CMDQ_CP_STS,
> > + mmTPC5_CMDQ_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 5 CMDQ\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC6_QM_GLBL_CFG1,
> > + mmTPC6_QM_CP_STS,
> > + mmTPC6_QM_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 6 QMAN\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC6_CMDQ_GLBL_CFG1,
> > + mmTPC6_CMDQ_CP_STS,
> > + mmTPC6_CMDQ_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 6 CMDQ\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC7_QM_GLBL_CFG1,
> > + mmTPC7_QM_CP_STS,
> > + mmTPC7_QM_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 7 QMAN\n");
> > + retval = -EIO;
> > + }
> > +
> > + rc = goya_stop_queue(hdev,
> > + mmTPC7_CMDQ_GLBL_CFG1,
> > + mmTPC7_CMDQ_CP_STS,
> > + mmTPC7_CMDQ_GLBL_STS0);
> > +
> > + if (rc) {
> > + dev_err(hdev->dev, "failed to stop TPC 7 CMDQ\n");
> > + retval = -EIO;
> > + }
> > +
> > + return rc;
> > +}
> > +
>
> [ ... ]
>
> > @@ -1494,6 +2370,104 @@ int goya_cb_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
> > return rc;
> > }
> >
> > +void goya_ring_doorbell(struct hl_device *hdev, u32 hw_queue_id, u32 pi)
> > +{
> > + u32 db_reg_offset, db_value;
> > + bool invalid_queue = false;
> > +
> > + switch (hw_queue_id) {
> > + case GOYA_QUEUE_ID_DMA_0:
> > + db_reg_offset = mmDMA_QM_0_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_DMA_1:
> > + db_reg_offset = mmDMA_QM_1_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_DMA_2:
> > + db_reg_offset = mmDMA_QM_2_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_DMA_3:
> > + db_reg_offset = mmDMA_QM_3_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_DMA_4:
> > + db_reg_offset = mmDMA_QM_4_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_CPU_PQ:
> > + if (hdev->cpu_queues_enable)
> > + db_reg_offset = mmCPU_IF_PF_PQ_PI;
> > + else
> > + invalid_queue = true;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_MME:
> > + db_reg_offset = mmMME_QM_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_TPC0:
> > + db_reg_offset = mmTPC0_QM_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_TPC1:
> > + db_reg_offset = mmTPC1_QM_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_TPC2:
> > + db_reg_offset = mmTPC2_QM_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_TPC3:
> > + db_reg_offset = mmTPC3_QM_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_TPC4:
> > + db_reg_offset = mmTPC4_QM_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_TPC5:
> > + db_reg_offset = mmTPC5_QM_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_TPC6:
> > + db_reg_offset = mmTPC6_QM_PQ_PI;
> > + break;
> > +
> > + case GOYA_QUEUE_ID_TPC7:
> > + db_reg_offset = mmTPC7_QM_PQ_PI;
> > + break;
> > +
> > + default:
> > + invalid_queue = true;
> > + }
> > +
> > + if (invalid_queue) {
> > + /* Should never get here */
> > + dev_err(hdev->dev, "h/w queue %d is invalid. Can't set pi\n",
> > + hw_queue_id);
> > + return;
> > + }
> > +
> > + db_value = pi;
> > +
> > + if (hdev->ifh)
> > + return;
>
> This could move to the beginning of the function, /me thinks.
>
I think I'll just remove this completely as this is a debug mode which
is no longer needed.
Thanks,
Oded
> > +
> > + /* ring the doorbell */
> > + WREG32(db_reg_offset, db_value);
> > +
> > + if (hw_queue_id == GOYA_QUEUE_ID_CPU_PQ)
> > + WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR,
> > + GOYA_ASYNC_EVENT_ID_PI_UPDATE);
> > +}
> > +
> > +void goya_flush_pq_write(struct hl_device *hdev, u64 *pq, u64 exp_val)
> > +{
> > + /* Not needed in Goya */
> > +}
> > +
> > void *goya_dma_alloc_coherent(struct hl_device *hdev, size_t size,
> > dma_addr_t *dma_handle, gfp_t flags)
> > {
> > @@ -1506,6 +2480,316 @@ void goya_dma_free_coherent(struct hl_device *hdev, size_t size, void *cpu_addr,
> > dma_free_coherent(&hdev->pdev->dev, size, cpu_addr, dma_handle);
> > }
> >
>
> --
> Sincerely yours,
> Mike.
>
Powered by blists - more mailing lists