Message-ID: <467a3ac8-5667-66bf-50eb-7d21a103d901@gmail.com>
Date:   Sun, 3 Feb 2019 17:47:56 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Sowjanya Komatineni <skomatineni@...dia.com>,
        thierry.reding@...il.com, jonathanh@...dia.com,
        mkarthik@...dia.com, smohammed@...dia.com, talho@...dia.com
Cc:     linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-i2c@...r.kernel.org
Subject: Re: [PATCH V9 3/5] i2c: tegra: Add DMA support

01.02.2019 20:07, Sowjanya Komatineni пишет:
> This patch adds DMA support for Tegra I2C.
> 
> Tegra I2C TX and RX FIFO depth is 8 words. PIO mode is used for
> transfer size of the max FIFO depth and DMA mode is used for
> transfer size higher than max FIFO depth to save CPU overhead.
> 
> PIO mode needs full intervention of CPU to fill or empty FIFO's
> and also need to service multiple data requests interrupt for the
> same transaction. This adds delay between data bytes of the same
> transfer when CPU is fully loaded and some slave devices has
> internal timeout for no bus activity and stops transaction to
> avoid bus hang. DMA mode is helpful in such cases.
> 
> DMA mode is also helpful for Large transfers during downloading or
> uploading FW over I2C to some external devices.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
> ---
>  [V9] : Rebased to 5.0-rc4
> 	Removed dependency of APB DMA in Kconfig and added conditional check
> 	in I2C driver to decide on using DMA mode.
> 	Changed back the allocation of dma buffer during i2c probe.
> 	Fixed FIFO triggers depending on DMA Vs PIO.
>  [V8] : Moved back dma init to i2c probe, removed ALL_PACKETS_XFER_COMPLETE
> 	interrupt and using PACKETS_XFER_COMPLETE interrupt only and some
> 	other fixes
> 	Updated Kconfig for APB_DMA dependency
>  [V7] : Same as V6
>  [V6] : Updated for proper buffer allocation/freeing, channel release.
> 	Updated to use exact xfer size for syncing dma buffer.
>  [V5] : Same as V4
>  [V4] : Updated to allocate DMA buffer only when DMA mode.
> 	Updated to fall back to PIO mode when DMA channel request or
> 	buffer allocation fails.
>  [V3] : Updated without additional buffer allocation.
>  [V2] : Updated based on V1 review feedback along with code cleanup for
> 	proper implementation of DMA.
> 
>  drivers/i2c/busses/i2c-tegra.c | 368 +++++++++++++++++++++++++++++++++++++----
>  1 file changed, 335 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 118b7023a0f4..ac8009c35863 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -8,6 +8,9 @@
>  
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dmapool.h>
> +#include <linux/dma-mapping.h>
>  #include <linux/err.h>
>  #include <linux/i2c.h>
>  #include <linux/init.h>
> @@ -44,6 +47,8 @@
>  #define I2C_FIFO_CONTROL_RX_FLUSH		BIT(0)
>  #define I2C_FIFO_CONTROL_TX_TRIG_SHIFT		5
>  #define I2C_FIFO_CONTROL_RX_TRIG_SHIFT		2
> +#define I2C_FIFO_CONTROL_TX_TRIG(x)		(((x) - 1) << 5)
> +#define I2C_FIFO_CONTROL_RX_TRIG(x)		(((x) - 1) << 2)
>  #define I2C_FIFO_STATUS				0x060
>  #define I2C_FIFO_STATUS_TX_MASK			0xF0
>  #define I2C_FIFO_STATUS_TX_SHIFT		4
> @@ -125,6 +130,19 @@
>  #define I2C_MST_FIFO_STATUS_TX_MASK		0xff0000
>  #define I2C_MST_FIFO_STATUS_TX_SHIFT		16
>  
> +/* Packet header size in bytes */
> +#define I2C_PACKET_HEADER_SIZE			12
> +
> +#define DATA_DMA_DIR_TX				(1 << 0)
> +#define DATA_DMA_DIR_RX				(1 << 1)
> +
> +/*
> + * Upto I2C_PIO_MODE_MAX_LEN bytes, controller will use PIO mode,
> + * above this, controller will use DMA to fill FIFO.
> + * MAX PIO len is 20 bytes excluding packet header.
> + */
> +#define I2C_PIO_MODE_MAX_LEN			32
> +
>  /*
>   * msg_end_type: The bus control which need to be send at end of transfer.
>   * @MSG_END_STOP: Send stop pulse at end of transfer.
> @@ -191,6 +209,7 @@ struct tegra_i2c_hw_feature {
>   * @fast_clk: clock reference for fast clock of I2C controller
>   * @rst: reset control for the I2C controller
>   * @base: ioremapped registers cookie
> + * @base_phys: Physical base address of the I2C controller
>   * @cont_id: I2C controller ID, used for packet header
>   * @irq: IRQ number of transfer complete interrupt
>   * @irq_disabled: used to track whether or not the interrupt is enabled
> @@ -204,6 +223,13 @@ struct tegra_i2c_hw_feature {
>   * @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
>   * @is_multimaster_mode: track if I2C controller is in multi-master mode
>   * @xfer_lock: lock to serialize transfer submission and processing
> + * @tx_dma_chan: DMA transmit channel
> + * @rx_dma_chan: DMA receive channel
> + * @dma_phys: handle to DMA resources
> + * @dma_buf: pointer to allocated DMA buffer
> + * @dma_buf_size: DMA buffer size
> + * @is_curr_dma_xfer: indicates active DMA transfer
> + * @dma_complete: DMA completion notifier
>   */
>  struct tegra_i2c_dev {
>  	struct device *dev;
> @@ -213,6 +239,7 @@ struct tegra_i2c_dev {
>  	struct clk *fast_clk;
>  	struct reset_control *rst;
>  	void __iomem *base;
> +	phys_addr_t base_phys;
>  	int cont_id;
>  	int irq;
>  	bool irq_disabled;
> @@ -226,6 +253,13 @@ struct tegra_i2c_dev {
>  	u16 clk_divisor_non_hs_mode;
>  	bool is_multimaster_mode;
>  	spinlock_t xfer_lock;
> +	struct dma_chan *tx_dma_chan;
> +	struct dma_chan *rx_dma_chan;
> +	dma_addr_t dma_phys;
> +	u32 *dma_buf;
> +	unsigned int dma_buf_size;
> +	bool is_curr_dma_xfer;
> +	struct completion dma_complete;
>  };
>  
>  static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
> @@ -294,6 +328,86 @@ static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
>  	i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
>  }
>  
> +static void tegra_i2c_dma_complete(void *args)
> +{
> +	struct tegra_i2c_dev *i2c_dev = args;
> +
> +	complete(&i2c_dev->dma_complete);
> +}
> +
> +static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
> +{
> +	struct dma_async_tx_descriptor *dma_desc;
> +	enum dma_transfer_direction dir;
> +	struct dma_chan *chan;
> +
> +	dev_dbg(i2c_dev->dev, "starting DMA for length: %zu\n", len);
> +	reinit_completion(&i2c_dev->dma_complete);
> +	dir = i2c_dev->msg_read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
> +	chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan;
> +	dma_desc = dmaengine_prep_slave_single(chan, i2c_dev->dma_phys,
> +					       len, dir, DMA_PREP_INTERRUPT |
> +					       DMA_CTRL_ACK);
> +	if (!dma_desc) {
> +		dev_err(i2c_dev->dev, "failed to get DMA descriptor\n");
> +		return -EIO;
> +	}
> +
> +	dma_desc->callback = tegra_i2c_dma_complete;
> +	dma_desc->callback_param = i2c_dev;
> +	dmaengine_submit(dma_desc);
> +	dma_async_issue_pending(chan);
> +	return 0;
> +}
> +
> +static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
> +{
> +	struct dma_chan *dma_chan;
> +	u32 *dma_buf;
> +	dma_addr_t dma_phys;
> +	int err = 0;
> +
> +	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA))
> +		return -ENODEV;
> +
> +	dma_chan = dma_request_slave_channel_reason(i2c_dev->dev, "rx");
> +	if (IS_ERR(dma_chan))
> +		return PTR_ERR(dma_chan);
> +
> +	i2c_dev->rx_dma_chan = dma_chan;
> +
> +	dma_chan = dma_request_slave_channel_reason(i2c_dev->dev, "tx");
> +	if (IS_ERR(dma_chan)) {
> +		err = PTR_ERR(dma_chan);
> +		goto error;
> +	}
> +
> +	i2c_dev->tx_dma_chan = dma_chan;
> +
> +	dma_buf = dma_alloc_coherent(i2c_dev->dev,
> +				     i2c_dev->dma_buf_size, &dma_phys,
> +				     GFP_KERNEL | __GFP_NOWARN);
> +
> +	if (!dma_buf) {
> +		dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
> +		err = -ENOMEM;
> +		goto error;
> +	}
> +
> +	i2c_dev->dma_buf = dma_buf;
> +	i2c_dev->dma_phys = dma_phys;
> +	return 0;
> +
> +error:
> +	if (i2c_dev->tx_dma_chan)
> +		dma_release_channel(i2c_dev->tx_dma_chan);
> +
> +	if (i2c_dev->rx_dma_chan)
> +		dma_release_channel(i2c_dev->rx_dma_chan);
> +
> +	return err;
> +}
> +
>  static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
>  {
>  	unsigned long timeout = jiffies + HZ;
> @@ -571,16 +685,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
>  		i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
>  	}
>  
> -	if (i2c_dev->hw->has_mst_fifo) {
> -		val = I2C_MST_FIFO_CONTROL_TX_TRIG(8) |
> -		      I2C_MST_FIFO_CONTROL_RX_TRIG(1);
> -		i2c_writel(i2c_dev, val, I2C_MST_FIFO_CONTROL);
> -	} else {
> -		val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
> -			0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
> -		i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
> -	}
> -
>  	err = tegra_i2c_flush_fifos(i2c_dev);
>  	if (err)
>  		goto err;
> @@ -660,25 +764,37 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
>  	if (i2c_dev->hw->supports_bus_clear && (status & I2C_INT_BUS_CLR_DONE))
>  		goto err;
>  
> -	if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
> -		if (i2c_dev->msg_buf_remaining)
> -			tegra_i2c_empty_rx_fifo(i2c_dev);
> -		else
> -			BUG();
> -	}
> +	if (!i2c_dev->is_curr_dma_xfer) {
> +		if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
> +			if (i2c_dev->msg_buf_remaining)
> +				tegra_i2c_empty_rx_fifo(i2c_dev);
> +			else
> +				BUG();
> +		}
>  
> -	if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
> -		if (i2c_dev->msg_buf_remaining)
> -			tegra_i2c_fill_tx_fifo(i2c_dev);
> -		else
> -			tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
> +		if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
> +			if (i2c_dev->msg_buf_remaining)
> +				tegra_i2c_fill_tx_fifo(i2c_dev);
> +			else
> +				tegra_i2c_mask_irq(i2c_dev,
> +						   I2C_INT_TX_FIFO_DATA_REQ);
> +		}
>  	}
>  
>  	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
>  	if (i2c_dev->is_dvc)
>  		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
>  
> +	/*
> +	 * During message read XFER_COMPLETE interrupt is triggered prior to
> +	 * DMA completion and during message write XFER_COMPLETE interrupt is
> +	 * triggered after DMA completion.
> +	 * PACKETS_XFER_COMPLETE indicates completion of all bytes of transfer.
> +	 * so forcing msg_buf_remaining to 0 in DMA mode.
> +	 */
>  	if (status & I2C_INT_PACKET_XFER_COMPLETE) {
> +		if (i2c_dev->is_curr_dma_xfer)
> +			i2c_dev->msg_buf_remaining = 0;
>  		BUG_ON(i2c_dev->msg_buf_remaining);
>  		complete(&i2c_dev->msg_complete);
>  	}
> @@ -694,12 +810,69 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
>  	if (i2c_dev->is_dvc)
>  		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
>  
> +	if (i2c_dev->is_curr_dma_xfer) {
> +		if (i2c_dev->msg_read)
> +			dmaengine_terminate_all(i2c_dev->rx_dma_chan);
> +		else
> +			dmaengine_terminate_all(i2c_dev->tx_dma_chan);
> +
> +		complete(&i2c_dev->dma_complete);
> +	}
> +
>  	complete(&i2c_dev->msg_complete);
>  done:
>  	spin_unlock(&i2c_dev->xfer_lock);
>  	return IRQ_HANDLED;
>  }
>  
> +static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
> +				       size_t len, int direction)
> +{
> +	u32 val, reg;
> +	u8 dma_burst = 0;
> +	struct dma_slave_config dma_sconfig;

This structure is allocated on stack, please initialize it to 0:

	struct dma_slave_config dma_sconfig = { 0 };

> +	struct dma_chan *chan;
> +
> +	if (i2c_dev->hw->has_mst_fifo)
> +		reg = I2C_MST_FIFO_CONTROL;
> +	else
> +		reg = I2C_FIFO_CONTROL;
> +	val = i2c_readl(i2c_dev, reg);
> +
> +	if (len & 0xF)
> +		dma_burst = 1;
> +	else if (len & 0x10)
> +		dma_burst = 4;
> +	else
> +		dma_burst = 8;
> +
> +	if (direction == DATA_DMA_DIR_TX) {
> +		if (i2c_dev->hw->has_mst_fifo)
> +			val |= I2C_MST_FIFO_CONTROL_TX_TRIG(dma_burst);
> +		else
> +			val |= I2C_FIFO_CONTROL_TX_TRIG(dma_burst);
> +	} else {
> +		if (i2c_dev->hw->has_mst_fifo)
> +			val |= I2C_MST_FIFO_CONTROL_RX_TRIG(dma_burst);
> +		else
> +			val |= I2C_FIFO_CONTROL_RX_TRIG(dma_burst);
> +	}
> +	i2c_writel(i2c_dev, val, reg);
> +
> +	if (direction == DATA_DMA_DIR_TX) {
> +		dma_sconfig.dst_addr = i2c_dev->base_phys + I2C_TX_FIFO;
> +		dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +		dma_sconfig.dst_maxburst = dma_burst;
> +	} else {
> +		dma_sconfig.src_addr = i2c_dev->base_phys + I2C_RX_FIFO;
> +		dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +		dma_sconfig.src_maxburst = dma_burst;
> +	}
> +
> +	chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan;
> +	dmaengine_slave_config(chan, &dma_sconfig);
> +}

[snip]

Powered by blists - more mailing lists