Message-ID: <523c4a23-b5b9-ff10-051d-c90e6e8341d4@arm.com>
Date:   Mon, 4 Feb 2019 10:33:44 +0000
From:   Marc Zyngier <marc.zyngier@....com>
To:     Lokesh Vutla <lokeshvutla@...com>, Nishanth Menon <nm@...com>,
        Santosh Shilimkar <ssantosh@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        "tglx@...utronix.de" <tglx@...utronix.de>,
        "jason@...edaemon.net" <jason@...edaemon.net>
Cc:     Linux ARM Mailing List <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Tero Kristo <t-kristo@...com>, Sekhar Nori <nsekhar@...com>,
        Device Tree Mailing List <devicetree@...r.kernel.org>,
        Peter Ujfalusi <peter.ujfalusi@...com>
Subject: Re: [RFC PATCH v4 08/13] genirq/msi: Add support for allocating
 single MSI for a device

On 24/01/2019 10:19, Lokesh Vutla wrote:
> Hi Marc,
> 	Sorry for the delayed response. Just back from vacation.
> 
> On 17/01/19 12:00 AM, Marc Zyngier wrote:
>> On 27/12/2018 06:13, Lokesh Vutla wrote:
>>> Previously all msi for a device are allocated in one go
>>> by calling msi_domain_alloc_irq() from a bus layer. This might
>>> not be the case when a device is trying to allocate interrupts
>>> dynamically based on a request to it.
>>>
>>> So introduce msi_domain_alloc/free_irq() apis to allocate a single
>>> msi. prepare and activate operations to be handled by bus layer
>>> calling msi_domain_alloc/free_irq() apis.
>>>
>>> Signed-off-by: Lokesh Vutla <lokeshvutla@...com>
>>> ---
>>>  include/linux/msi.h |  3 +++
>>>  kernel/irq/msi.c    | 62 +++++++++++++++++++++++++++++----------------
>>>  2 files changed, 43 insertions(+), 22 deletions(-)
>>>
>>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>>> index 784fb52b9900..474490826f8c 100644
>>> --- a/include/linux/msi.h
>>> +++ b/include/linux/msi.h
>>> @@ -301,8 +301,11 @@ int msi_domain_set_affinity(struct irq_data *data, const struct cpumask *mask,
>>>  struct irq_domain *msi_create_irq_domain(struct fwnode_handle *fwnode,
>>>   struct msi_domain_info *info,
>>>   struct irq_domain *parent);
>>> +int msi_domain_alloc_irq(struct irq_domain *domain, struct device *dev,
>>> + struct msi_desc *desc,  msi_alloc_info_t *arg);
>>>  int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev,
>>>    int nvec);
>>> +void msi_domain_free_irq(struct msi_desc *desc);
>>>  void msi_domain_free_irqs(struct irq_domain *domain, struct device *dev);
>>>  struct msi_domain_info *msi_get_domain_info(struct irq_domain *domain);
>>>
>>> diff --git a/kernel/irq/msi.c b/kernel/irq/msi.c
>>> index ad26fbcfbfc8..eb7459324113 100644
>>> --- a/kernel/irq/msi.c
>>> +++ b/kernel/irq/msi.c
>>> @@ -387,6 +387,35 @@ static bool msi_check_reservation_mode(struct irq_domain *domain,
>>>  return desc->msi_attrib.is_msix || desc->msi_attrib.maskbit;
>>>  }
>>>
>>> +int msi_domain_alloc_irq(struct irq_domain *domain, struct device *dev,
>>> + struct msi_desc *desc,  msi_alloc_info_t *arg)
>>> +{
>>> +struct msi_domain_info *info = domain->host_data;
>>> +struct msi_domain_ops *ops = info->ops;
>>> +int i, ret, virq;
>>> +
>>> +ops->set_desc(arg, desc);
>>> +
>>> +virq = __irq_domain_alloc_irqs(domain, -1, desc->nvec_used,
>>> +       dev_to_node(dev), arg, false,
>>> +       desc->affinity);
>>> +if (virq < 0) {
>>> +ret = -ENOSPC;
>>> +if (ops->handle_error)
>>> +ret = ops->handle_error(domain, desc, ret);
>>> +if (ops->msi_finish)
>>> +ops->msi_finish(arg, ret);
>>> +return ret;
>>> +}
>>> +
>>> +for (i = 0; i < desc->nvec_used; i++) {
>>> +irq_set_msi_desc_off(virq, i, desc);
>>> +irq_debugfs_copy_devname(virq + i, dev);
>>> +}
>>> +
>>> +return 0;
>>> +}
>>> +
>>>  /**
>>>   * msi_domain_alloc_irqs - Allocate interrupts from a MSI interrupt domain
>>>   * @domain:The domain to allocate from
>>> @@ -404,7 +433,7 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev,
>>>  struct irq_data *irq_data;
>>>  struct msi_desc *desc;
>>>  msi_alloc_info_t arg;
>>> -int i, ret, virq;
>>> +int ret, virq;
>>>  bool can_reserve;
>>>
>>>  ret = msi_domain_prepare_irqs(domain, dev, nvec, &arg);
>>> @@ -412,24 +441,9 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev,
>>>  return ret;
>>>
>>>  for_each_msi_entry(desc, dev) {
>>> -ops->set_desc(&arg, desc);
>>> -
>>> -virq = __irq_domain_alloc_irqs(domain, -1, desc->nvec_used,
>>> -       dev_to_node(dev), &arg, false,
>>> -       desc->affinity);
>>> -if (virq < 0) {
>>> -ret = -ENOSPC;
>>> -if (ops->handle_error)
>>> -ret = ops->handle_error(domain, desc, ret);
>>> -if (ops->msi_finish)
>>> -ops->msi_finish(&arg, ret);
>>> +ret = msi_domain_alloc_irq(domain, dev, desc, &arg);
>>> +if (ret)
>>>  return ret;
>>> -}
>>> -
>>> -for (i = 0; i < desc->nvec_used; i++) {
>>> -irq_set_msi_desc_off(virq, i, desc);
>>> -irq_debugfs_copy_devname(virq + i, dev);
>>> -}
>>>  }
>>>
>>>  if (ops->msi_finish)
>>> @@ -487,6 +501,12 @@ int msi_domain_alloc_irqs(struct irq_domain *domain, struct device *dev,
>>>  return ret;
>>>  }
>>>
>>> +void msi_domain_free_irq(struct msi_desc *desc)
>>> +{
>>> +irq_domain_free_irqs(desc->irq, desc->nvec_used);
>>> +desc->irq = 0;
>>> +}
>>> +
>>>  /**
>>>   * msi_domain_free_irqs - Free interrupts from a MSI interrupt @domain associated tp @dev
>>>   * @domain:The domain to managing the interrupts
>>> @@ -503,10 +523,8 @@ void msi_domain_free_irqs(struct irq_domain *domain, struct device *dev)
>>>   * enough that there is no IRQ associated to this
>>>   * entry. If that's the case, don't do anything.
>>>   */
>>> -if (desc->irq) {
>>> -irq_domain_free_irqs(desc->irq, desc->nvec_used);
>>> -desc->irq = 0;
>>> -}
>>> +if (desc->irq)
>>> +msi_domain_free_irq(desc);
>>>  }
>>>  }
>>>
>>>
>>
>> I can see some interesting issues with this API.
>>
>> At the moment, MSIs are allocated upfront, and that's usually done
>> before the driver can do anything else. With what you're suggesting
>> here, MSIs can now be allocated at any time, which sounds great. But how
>> does it work when MSIs get added/freed in parallel? I can't see any
>> locking here...
>>
>> It is also pretty nasty that the user of this API has to know about the
>> MSI descriptor. Really, nobody should have to deal with this outside of
>> the MSI layer.
>>
>> The real question is why you need to need to allocate MSIs on demand for
>> a given device. Usually, you allocate them because this is a per-CPU
>> resource, or something similar. What makes it so variable that you need
>> to resort to fine grained MSI allocation?
> 
> I added this after the discussion we had in the previous version[1] of this
> series. Let me provide the details again:
> 
> As you must be aware INTR is interrupt re-director and INTA is the interrupt
> multiplexer is the SoC. Here we are trying to address the interrupt connection
> route as below:
> Device(Global event) --> INTA --> INTR --> GIC
> 
> For the above case you suggested to have the following sw IRQ domain hierarchy:
> INTA multi MSI --> INTA  -->  INTR  --> GIC
> 
> The problem here with the INTA MSI is that all the interrupts for a device
> should be pre-allocated during the device probe time. But this is not what we
> wanted especially for the DMA case.
> 
> An example DMA ring connection would look like below[2]:
> 
>                       +---------------------+
>                        |         IA                |
> +--------+        |            +------+   |        +--------+         +------+
> | ring 1 +----->evtA+->VintX+-------->+   IR   +-- --->  GIC +-->
> +--------+       |             +------+   |        +--------+         +------+
> Linux IRQ Y
>    evtA            |                             |
>                        |                             |
>                       +----------------------+
> 
> So when a DMA client driver requests a dma channel during probe, the DMA driver
> gets a free ring in its allocated range. Then DMA driver requests MSI layer for
> an IRQ. This is why I had to introduce on demand allocation of MSIs for a device.
> 
> The reason why we avoided DMA driver to allocate interrupts during its probe as
> it is not aware of the exact no of channels that are going to be used. Also max
> allocation of interrupts will overrun the gic IRQs available to this INTA and
> the IPs that are connected to INTR directly will not get any interrupts.

But surely there is an upper bound that does exist for a given system,
right?  DMA rings are not allocated out of nowhere. Or are you saying
that when a DMA client requests DMA rings, it doesn't know how many it
wants? Or does it? I don't think this is new in any of TI's design (the
crossbar already had such limitation).

That being said, I'm open to revisiting this, but you must then
introduce the right level of mutual exclusion in core code, as the
msi_desc list now becomes much more dynamic and things would otherwise
break badly. This has implications all over the place, and probably
requires quite a bit of work (things like for_each_msi_desc_entry will
break).

Between the two solutions outlined above, the first one is much easier
to achieve than the second one.

Another avenue to explore would be to let the clients allocate as many
MSIs as they want upfront, and use the "activate" callback to actually
perform the assignment when such interrupt gets requested. In a way,
this is not that different from what x86 does with the "early
reservation, late assignment" type mechanism.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Powered by blists - more mailing lists