linux-kernel - [PATCH v6 0/4] arm64 SMMUv3 PMU driver with IORT support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 4 Feb 2019 12:13:20 +0000
From:   Shameer Kolothum <shameerali.kolothum.thodi@...wei.com>
To:     <lorenzo.pieralisi@....com>, <robin.murphy@....com>
CC:     <andrew.murray@....com>, <jean-philippe.brucker@....com>,
        <will.deacon@....com>, <mark.rutland@....com>,
        <guohanjun@...wei.com>, <john.garry@...wei.com>,
        <pabba@...eaurora.org>, <vkilari@...eaurora.org>,
        <rruigrok@...eaurora.org>, <linux-acpi@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <linuxarm@...wei.com>,
        <neil.m.leeder@...il.com>
Subject: [PATCH v6 0/4] arm64 SMMUv3 PMU driver with IORT support

This adds a driver for the SMMUv3 PMU into the perf framework.
It includes an IORT update to support PM Counter Groups.

This is based on the initial work done by Neil Leeder[1]

SMMUv3 PMCG devices are named as smmuv3_pmcg_<phys_addr_page>
where <phys_addr_page> is the physical page address of the SMMU PMCG.
For example, the PMCG at 0xff88840000 is named smmuv3_pmcg_ff88840

Usage example:
For common arch supported events:
perf stat -e smmuv3_pmcg_ff88840/transaction,filter_enable=1,
 filter_span=1,filter_stream_id=0x42/ -a netperf

For IMP DEF events:
perf stat -e smmuv3_pmcg_ff88840/event=id/ -a netperf

This is sanity tested on a HiSilicon platform that requires
a quirk to run  it properly. As per HiSilicon erratum  #162001800,
PMCG event counter registers (SMMU_PMCG_EVCNTRn) on HiSilicon Hip08
platforms are read only and this prevents the software from setting
the initial period on event start. Unfortunately we were a bit late
in the cycle to detect this issue and now require software workaround
for this. Patch #4 is added to this series to provide a workaround
for this issue.

Further testing on supported platforms are very much welcome.

v5 ---> v6
-Addressed comments from Robin and Andrew.
-Changed the way global filter settings are applied as a probable
 fix to the v5 bug where in-use settings gets overwritten.
-Use of PMCG model number to identify the platform.
-Added R-by from Robin to patches #1 and #3.

v4 ---> v5
-IORT code is modified to pass the option/quirk flags to the driver
 through platform_data (patch #4), based on Robin's comments.
-Removed COMPILE_TEST (patch #2).

v3 --> v4

-Addressed comments from Jean and Robin.
-Merged dma config callbacks as per Lorenzo's comments(patch #1).
-Added handling of Global(Counter0) filter settings mode(patch #2).
-Added patch #4 to address HiSilicon erratum  #162001800
-
v2 --> v3

-Addressed comments from Robin.
-Removed iort helper function to retrieve the PMCG reference smmu.
-PMCG devices are now named using the base address

v1 --> v2

- Addressed comments from Robin.
- Added an helper to retrieve the associated smmu dev and named PMUs
  to make the association visible to user.
- Added MSI support  for overflow irq

[1]https://www.spinics.net/lists/arm-kernel/msg598591.html

Neil Leeder (2):
  acpi: arm64: add iort support for PMCG
  perf: add arm64 smmuv3 pmu driver

Shameer Kolothum (2):
  perf/smmuv3: Add MSI irq support
  perf/smmuv3_pmu: Enable HiSilicon Erratum 162001800 quirk

 drivers/acpi/arm64/iort.c     | 131 +++++--
 drivers/perf/Kconfig          |   9 +
 drivers/perf/Makefile         |   1 +
 drivers/perf/arm_smmuv3_pmu.c | 873 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi_iort.h     |   7 +
 5 files changed, 997 insertions(+), 24 deletions(-)
 create mode 100644 drivers/perf/arm_smmuv3_pmu.c

-- 
2.7.4