lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190205104406.GA1823@linux.intel.com>
Date:   Tue, 5 Feb 2019 12:44:06 +0200
From:   Jarkko Sakkinen <jarkko.sakkinen@...ux.intel.com>
To:     David Laight <David.Laight@...LAB.COM>
Cc:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-integrity@...r.kernel.org" <linux-integrity@...r.kernel.org>,
        "linux-security-module@...r.kernel.org" 
        <linux-security-module@...r.kernel.org>,
        "stable@...r.kernel.org" <stable@...r.kernel.org>,
        Linus Torvalds <torvalds@...ux-foundation.org>,
        James Morris <jmorris@...ei.org>,
        Tomas Winkler <tomas.winkler@...el.com>,
        Jerry Snitselaar <jsnitsel@...hat.com>
Subject: Re: [PATCH] tpm/tpm_crb: Avoid unaligned reads in crb_recv():

On Mon, Feb 04, 2019 at 12:17:43PM +0000, David Laight wrote:
> From: Jarkko Sakkinen
> > Sent: 01 February 2019 11:20
> > The current approach to read first 6 bytes from the response and then tail
> > of the response, can cause the 2nd memcpy_fromio() to do an unaligned read
> > (e.g. read 32-bit word from address aligned to a 16-bits), depending on how
> > memcpy_fromio() is implemented. If this happens, the read will fail and the
> > memory controller will fill the read with 1's.
> 
> To my mind memcpy_to/fromio() should only be used on IO addresses that are
> adequately like memory, and should be implemented in a way that that won't
> generate invalid bus cycles.
> Also memcpy_fromio() should also be allowed to do 'aligned' accesses that
> go beyond the ends of the required memory area.
> 
> ...
> > 
> > -	memcpy_fromio(buf, priv->rsp, 6);
> > +	memcpy_fromio(buf, priv->rsp, 8);
> >  	expected = be32_to_cpup((__be32 *) &buf[2]);
> > -	if (expected > count || expected < 6)
> > +	if (expected > count || expected < 8)
> >  		return -EIO;
> > 
> > -	memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6);
> > +	memcpy_fromio(&buf[8], &priv->rsp[8], expected - 8);
> 
> Why not just use readl() or readq() ?
> 
> Bound to generate better code.

For the first read can be done. The second read is of variable
length.

/Jarkko

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ