[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <9a859310-156b-5e1d-1454-8bddc718fd9d@free.fr>
Date: Tue, 5 Feb 2019 17:51:29 +0100
From: Marc Gonzalez <marc.w.gonzalez@...e.fr>
To: Jeffrey Hugo <jhugo@...eaurora.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Douglas Anderson <dianders@...omium.org>
Cc: MSM <linux-arm-msm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: msm8998: Hacking the USB3 controller (force controller to
host/source mode)
If I plug in a USB-to-Ethernet gadget, the kernel sees something:
usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
usb 2-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: AX88179
usb 2-1: Manufacturer: ASIX Elec. Corp.
usb 2-1: SerialNumber: 00000000000012
ax88179_178a 2-1:1.0 eth0: register 'ax88179_178a' at usb-xhci-hcd.0.auto-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:0e:c6:fb:e2:41
usbcore: registered new interface driver ax88179_178a
# lsmod
Module Size Used by Not tainted
ax88179_178a 24576 0
usbnet 32768 1 ax88179_178a
mii 20480 2 ax88179_178a,usbnet
But the eth LEDs don't turn on (or blink) when I plug in a cable.
Could it be a power/voltage issue?
# lsusb -v
Bus 002 Device 003: ID 0b95:1790
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x0b95
idProduct 0x1790
bcdDevice 1.00
iManufacturer 1 ASIX Elec. Corp.
iProduct 2 AX88179
iSerial 3 00000000000012
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0039
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 496mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 0
iInterface 4 Network_Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 11
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x0016
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 1 micro seconds
bU2DevExitLat 101 micro seconds
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
Powered by blists - more mailing lists