| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190205185902.106085-7-evgreen@chromium.org>
Date: Tue, 5 Feb 2019 10:59:00 -0800
From: Evan Green <evgreen@...omium.org>
To: Andy Gross <andy.gross@...aro.org>,
Kishon Vijay Abraham I <kishon@...com>
Cc: Stephen Boyd <swboyd@...omium.org>,
Marc Gonzalez <marc.w.gonzalez@...e.fr>,
Can Guo <cang@...eaurora.org>,
Vivek Gautam <vivek.gautam@...eaurora.org>,
Douglas Anderson <dianders@...omium.org>,
Asutosh Das <asutoshd@...eaurora.org>,
Evan Green <evgreen@...omium.org>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
Vinayak Holikatti <vinholikatti@...il.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 6/8] scsi: ufs: qcom: Expose the reset controller for PHY
Expose a reset controller that the phy will later use to control its
own PHY reset in the UFS controller. This will enable the combining
of PHY init functionality into a single function.
Signed-off-by: Evan Green <evgreen@...omium.org>
---
Note: The remaining changes in this series need this change, since
the PHYs now depend on getting the reset controller.
Changes in v3:
- Refactor to only expose the reset controller in one change (Stephen).
- Add period to comment (Stephen).
- Reset err to 0 in ignored error case (Stephen).
- Add include of reset-controller.h (Stephen)
Changes in v2:
- Remove include of reset.h (Stephen)
- Fix error print of phy_power_on (Stephen)
- Comment for reset controller warnings on id != 0 (Stephen)
- Add static to ufs_qcom_reset_ops (Stephen).
drivers/scsi/ufs/Kconfig | 1 +
drivers/scsi/ufs/ufs-qcom.c | 52 +++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufs-qcom.h | 4 +++
3 files changed, 57 insertions(+)
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 2ddbb26d9c26..63c5c4115981 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -100,6 +100,7 @@ config SCSI_UFS_QCOM
tristate "QCOM specific hooks to UFS controller platform driver"
depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
select PHY_QCOM_UFS
+ select RESET_CONTROLLER
help
This selects the QCOM specific additions to UFSHCD platform driver.
UFS host on QCOM needs some vendor specific configuration before
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 3aeadb14aae1..ab05ef5cfdcd 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -16,6 +16,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
+#include <linux/reset-controller.h>
#include "ufshcd.h"
#include "ufshcd-pltfrm.h"
@@ -49,6 +50,11 @@ static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
u32 clk_cycles);
+static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
+{
+ return container_of(rcd, struct ufs_qcom_host, rcdev);
+}
+
static void ufs_qcom_dump_regs_wrapper(struct ufs_hba *hba, int offset, int len,
const char *prefix, void *priv)
{
@@ -1147,6 +1153,41 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
return err;
}
+static int
+ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
+
+ /* Currently this code only knows about a single reset. */
+ WARN_ON(id);
+ ufs_qcom_assert_reset(host->hba);
+ /* provide 1ms delay to let the reset pulse propagate. */
+ usleep_range(1000, 1100);
+ return 0;
+}
+
+static int
+ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
+
+ /* Currently this code only knows about a single reset. */
+ WARN_ON(id);
+ ufs_qcom_deassert_reset(host->hba);
+
+ /*
+ * after reset deassertion, phy will need all ref clocks,
+ * voltage, current to settle down before starting serdes.
+ */
+ usleep_range(1000, 1100);
+ return 0;
+}
+
+static const struct reset_control_ops ufs_qcom_reset_ops = {
+ .assert = ufs_qcom_reset_assert,
+ .deassert = ufs_qcom_reset_deassert,
+};
+
#define ANDROID_BOOT_DEV_MAX 30
static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
@@ -1191,6 +1232,17 @@ static int ufs_qcom_init(struct ufs_hba *hba)
host->hba = hba;
ufshcd_set_variant(hba, host);
+ /* Fire up the reset controller. Failure here is non-fatal. */
+ host->rcdev.of_node = dev->of_node;
+ host->rcdev.ops = &ufs_qcom_reset_ops;
+ host->rcdev.owner = dev->driver->owner;
+ host->rcdev.nr_resets = 1;
+ err = devm_reset_controller_register(dev, &host->rcdev);
+ if (err) {
+ dev_warn(dev, "Failed to register reset controller\n");
+ err = 0;
+ }
+
/*
* voting/devoting device ref_clk source is time consuming hence
* skip devoting it during aggressive clock gating. This clock
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index c114826316eb..68a880185752 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -14,6 +14,8 @@
#ifndef UFS_QCOM_H_
#define UFS_QCOM_H_
+#include <linux/reset-controller.h>
+
#define MAX_UFS_QCOM_HOSTS 1
#define MAX_U32 (~(u32)0)
#define MPHY_TX_FSM_STATE 0x41
@@ -237,6 +239,8 @@ struct ufs_qcom_host {
/* Bitmask for enabling debug prints */
u32 dbg_print_en;
struct ufs_qcom_testbus testbus;
+
+ struct reset_controller_dev rcdev;
};
static inline u32
--
2.20.1
Powered by blists - more mailing lists