[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1549531468-1676-1-git-send-email-claudiu.beznea@microchip.com>
Date: Thu, 7 Feb 2019 09:24:42 +0000
From: <Claudiu.Beznea@...rochip.com>
To: <linus.walleij@...aro.org>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <Nicolas.Ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <Ludovic.Desroches@...rochip.com>
CC: <linux-gpio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <Claudiu.Beznea@...rochip.com>
Subject: [PATCH v3 0/7] add support for SAM9X60 pin controller
From: Claudiu Beznea <claudiu.beznea@...rochip.com>
This series adds drive strenght and slew rate support for SAMX60's pin
controller. For drive strenght we could have 2 values: low, high.
For slew rate we could have 2 values: enable, disabled.
Besides this I took the chance and adapt the documentation for at91 pinctrl
driver.
Changes in v3:
- fix checkpatch.pl warning on DBG_SHOW_FLAG_MASKED() macro in patch 1/7
- add Ack-by tag
Changes in v2:
- s/microchip,sam9x60-pictrl/microchip,sam9x60-pinctrl in patches 3/7, 5/7
Claudiu Beznea (7):
pinctrl: at91: add option to use drive strength bits
pinctrl: at91: add drive strength support for SAM9X60
pinctrl: at91: add compatibles for SAM9X60 pin controller
dt-bindings: add documentation for banks
dt-bindings: add bindings for SAM9X60
pinctrl: at91: add slewrate support for SAM9X60
dt-bindings: add documentation for slew rate
.../bindings/pinctrl/atmel,at91-pinctrl.txt | 27 ++++-
drivers/pinctrl/pinctrl-at91.c | 134 +++++++++++++++++++--
drivers/pinctrl/pinctrl-at91.h | 3 +
include/dt-bindings/pinctrl/at91.h | 4 +
4 files changed, 155 insertions(+), 13 deletions(-)
--
2.7.4
Powered by blists - more mailing lists