linux-kernel - [PATCH v3 7/7] dt-bindings: add documentation for slew rate

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1549531468-1676-8-git-send-email-claudiu.beznea@microchip.com>
Date:   Thu, 7 Feb 2019 09:25:08 +0000
From:   <Claudiu.Beznea@...rochip.com>
To:     <linus.walleij@...aro.org>, <robh+dt@...nel.org>,
        <mark.rutland@....com>, <Nicolas.Ferre@...rochip.com>,
        <alexandre.belloni@...tlin.com>, <Ludovic.Desroches@...rochip.com>
CC:     <linux-gpio@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <Claudiu.Beznea@...rochip.com>
Subject: [PATCH v3 7/7] dt-bindings: add documentation for slew rate

From: Claudiu Beznea <claudiu.beznea@...rochip.com>

Add documentation for slew rate.

Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
---
 Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index c2d51ed86d47..19c255346a49 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -100,6 +100,7 @@ DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the
 				11 - High
 OUTPUT		(1 << 7): indicate this pin need to be configured as an output.
 OUTPUT_VAL	(1 << 8): output val (1 = high, 0 = low)
+SLEWRATE	(1 << 9): slew rate of the pin: 0 = disable, 1 = enable
 DEBOUNCE	(1 << 16): indicate this pin needs debounce.
 DEBOUNCE_VAL	(0x3fff << 17): debounce value.
 
-- 
2.7.4